ARM: m28evk: Update default environment

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lothar Rubusch <lothar@denx.de>

1 files changed, 84 insertions, 3 deletions

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 89f9785cabc..fccd29dc26c 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -157,14 +157,28 @@
 
 /* Booting Linux */
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
-#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
+#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Extra Environment */
+#define CONFIG_PREBOOT		"run try_bootscript"
+#define CONFIG_HOSTNAME		m28evk
+
 #define CONFIG_EXTRA_ENV_SETTINGS					\
+	"consdev=ttyAMA0\0"						\
+	"baudrate=115200\0"						\
+	"bootdev=/dev/mmcblk0p2\0"					\
+	"rootdev=/dev/mmcblk0p3\0"					\
+	"netdev=eth0\0"							\
+	"hostname=m28evk\0"						\
+	"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0"		\
+	"kernel_addr_r=0x42000000\0"					\
+	"videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,"	\
+		"le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,"	\
+		"vmode:0\0"						\
 	"update_nand_full_filename=u-boot.nand\0"			\
 	"update_nand_firmware_filename=u-boot.sb\0"			\
 	"update_sd_firmware_filename=u-boot.sd\0"			\
@@ -180,7 +194,7 @@
 		"if tftp ${update_nand_full_filename} ; then "		\
 		"run update_nand_get_fcb_size ; "			\
 		"nand scrub -y 0x0 ${filesize} ; "			\
-		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
+		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "		\
 		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
@@ -202,6 +216,73 @@
 		"setexpr fw_sz ${fw_sz} + 1 ; "				\
 		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
 		"fi ; "							\
+		"fi\0"							\
+	"addcons="							\
+		"setenv bootargs ${bootargs} "				\
+		"console=${consdev},${baudrate}\0"			\
+	"addip="							\
+		"setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
+			"${netmask}:${hostname}:${netdev}:off\0"	\
+	"addmisc="							\
+		"setenv bootargs ${bootargs} ${miscargs}\0"		\
+	"adddfltmtd="							\
+		"if test \"x${mtdparts}\" == \"x\" ; then "		\
+			"mtdparts default ; "				\
+		"fi\0"							\
+	"addmtd="							\
+		"run adddfltmtd ; "					\
+		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addargs=run addcons addmtd addmisc\0"				\
+	"mmcload="							\
+		"mmc rescan ; "						\
+		"ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"	\
+	"ubiload="							\
+		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
+		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
+	"netload="							\
+		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
+	"miscargs=nohlt panic=1\0"					\
+	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
+	"ubiargs="							\
+		"setenv bootargs ubi.mtd=5 "				\
+		"root=ubi0:rootfs rootfstype=ubifs\0"			\
+	"nfsargs="							\
+		"setenv bootargs root=/dev/nfs rw "			\
+			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
+	"mmc_mmc="							\
+		"run mmcload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_ubi="							\
+		"run mmcload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"mmc_nfs="							\
+		"run mmcload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_mmc="							\
+		"run ubiload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_ubi="							\
+		"run ubiload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"ubi_nfs="							\
+		"run ubiload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_mmc="							\
+		"run netload mmcargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_ubi="							\
+		"run netload ubiargs addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nfs="							\
+		"run netload nfsargs addip addargs ; "			\
+		"bootm ${kernel_addr_r}\0"				\
+	"try_bootscript="						\
+		"mmc rescan;"						\
+		"if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
+		"then;"							\
+			"\techo Running bootscript...;"			\
+			"\tsource ${kernel_addr_r};"			\
 		"fi\0"
 
 /* The rest of the configuration is shared */