* Fix startup problems with VFD display on TRAB

* Patch by Pierre Aubert, 20 Nov 2002
  Add driver for Epson SED13806 graphic controller.
  Add support for BMP logos in cfb_console driver.

21 files changed, 1000 insertions, 104 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 876f7f59e04..1fa99b4c5e6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
 Changes since for U-Boot 0.1.0:
 ======================================================================
 
+* Fix startup problems with VFD display on TRAB
+
+* Patch by Pierre Aubert, 20 Nov 2002
+  Add driver for Epson SED13806 graphic controller.
+  Add support for BMP logos in cfb_console driver.
+
 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
 
 * Patch by Rod Boyce, 21 Nov 2002:
diff --git a/README b/README
index fdb09fe2e21..2287f14ac68 100644
--- a/README
+++ b/README
@@ -423,6 +423,9 @@ The following options need to be configured:
 						(requires CFG_CMD_DATE)
 			CONFIG_VIDEO_LOGO	display Linux logo in
 						upper left corner
+			CONFIG_VIDEO_BMP_LOGO	use bmp_logo.h instead of
+						linux_logo.h for logo.
+						Requires CONFIG_VIDEO_LOGO
 			CONFIG_CONSOLE_EXTRA_INFO
 						addional board info beside
 						the logo
@@ -710,6 +713,12 @@ The following options need to be configured:
         16,7 Mill (24bit)     315       318       31b
 		(i.e. setenv videomode 317; saveenv; reset;)
 
+		CONFIG_VIDEO_SED13806 
+                Enable Epson SED13806 driver. This driver supports 8bpp
+		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
+		or CONFIG_VIDEO_SED13806_16BPP
+
+
 - LCD Support:	CONFIG_LCD
 
 		Define this to enable LCD support (for output to LCD
diff --git a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
index 6edfd76e199..56f3cd766d0 100644
--- a/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
+++ b/board/MAI/bios_emulator/scitech/src/x86emu/makefile.cross
@@ -30,6 +30,9 @@
 #
 #############################################################################
 
+CC = $(CROSS_COMPILE)gcc
+AR = $(CROSS_COMPILE)ar
+
 TARGETLIB = libx86emu.a
 TARGETDEBUGLIB =libx86emud.a
 
@@ -54,26 +57,26 @@ DEBUGOBJS=debug.d \
 all: $(TARGETLIB) $(TARGETDEBUGLIB)
 
 $(TARGETLIB): $(OBJS)
-	ppc-elf32-ar rv $(TARGETLIB) $(OBJS)
+	$(AR) rv $(TARGETLIB) $(OBJS)
 
 $(TARGETDEBUGLIB): $(DEBUGOBJS)
-	ppc-elf32-ar rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
+	$(AR) rv $(TARGETDEBUGLIB) $(DEBUGOBJS)
 
 INCS   = -I. -Ix86emu -I../../include
 CFLAGS = -D__DRIVER__ -DFORCE_POST -D_CEXPORT= -DNO_LONG_LONG -Dprintk=printf -fsigned-char  -fomit-frame-pointer -mrelocatable -ffixed-r14 -meabi -mrelocatable -ffixed-r14 -meabi
 CDEBUGFLAGS = -DDEBUG
 
 .c.o:
-	ppc-elf32-gcc -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
+	$(CC) -g -O2 -Wall -c $(CFLAGS) $(INCS) $*.c
 
 .c.d:
-	ppc-elf32-gcc -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
+	$(CC) -g -O2 -Wall -c -o$*.d $(CFLAGS) $(CDEBUGFLAGS) $(INCS) $*.c
 
 .cpp.o:
-	ppc-elf32-gcc -c $(CFLAGS) $(INCS) $*.cpp
+	$(CC) -c $(CFLAGS) $(INCS) $*.cpp
 
 clean:
 	rm -f *.a *.o *.d
 
 validate:	validate.o libx86emu.a
-	ppc-elf32-gcc -o validate validate.o -lx86emu -L.
+	$(CC) -o validate validate.o -lx86emu -L.
diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile
index ef173d03663..857e9a88074 100644
--- a/board/RPXClassic/Makefile
+++ b/board/RPXClassic/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o eccx.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $^
diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c
new file mode 100644
index 00000000000..d5edc2b190b
--- /dev/null
+++ b/board/RPXClassic/eccx.c
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* Video support for the ECCX daughter board                                 */
+
+
+#include <common.h>
+#include <config.h>
+
+#ifdef CONFIG_VIDEO_SED13806
+#include <sed13806.h>
+
+
+
+/* Screen configurations: the initialization of the SD13806 depends on
+   screen and on display mode. We handle only 8bpp and 16 bpp modes          */
+
+/* ECCX board is supplied with a NEC NL6448BC20 screen                       */
+#ifdef CONFIG_NEC_NL6448BC20
+#define DISPLAY_WIDTH   640
+#define DISPLAY_HEIGHT  480
+
+#ifdef CONFIG_VIDEO_SED13806_8BPP
+static const S1D_REGS init_regs [] = 
+{
+    {0x0001,0x00},   // Miscellaneous Register
+    {0x01FC,0x00},   // Display Mode Register
+    {0x0004,0x1b},   // General IO Pins Configuration Register 0
+    {0x0005,0x00},   // General IO Pins Configuration Register 1
+    {0x0008,0xe5},   // General IO Pins Control Register 0
+    {0x0009,0x1f},   // General IO Pins Control Register 1
+    {0x0010,0x02},   // Memory Clock Configuration Register
+    {0x0014,0x10},   // LCD Pixel Clock Configuration Register
+    {0x0018,0x02},   // CRT/TV Pixel Clock Configuration Register
+    {0x001C,0x02},   // MediaPlug Clock Configuration Register
+    {0x001E,0x01},   // CPU To Memory Wait State Select Register
+    {0x0021,0x04},   // DRAM Refresh Rate Register
+    {0x002A,0x00},   // DRAM Timings Control Register 0
+    {0x002B,0x01},   // DRAM Timings Control Register 1
+    {0x0020,0x80},   // Memory Configuration Register
+    {0x0030,0x25},   // Panel Type Register
+    {0x0031,0x00},   // MOD Rate Register
+    {0x0032,0x4F},   // LCD Horizontal Display Width Register
+    {0x0034,0x13},   // LCD Horizontal Non-Display Period Register
+    {0x0035,0x01},   // TFT FPLINE Start Position Register
+    {0x0036,0x0B},   // TFT FPLINE Pulse Width Register
+    {0x0038,0xDF},   // LCD Vertical Display Height Register 0
+    {0x0039,0x01},   // LCD Vertical Display Height Register 1
+    {0x003A,0x2C},   // LCD Vertical Non-Display Period Register
+    {0x003B,0x00},   // TFT FPFRAME Start Position Register
+    {0x003C,0x01},   // TFT FPFRAME Pulse Width Register
+    {0x0040,0x03},   // LCD Display Mode Register
+    {0x0041,0x02},   // LCD Miscellaneous Register
+    {0x0042,0x00},   // LCD Display Start Address Register 0
+    {0x0043,0x00},   // LCD Display Start Address Register 1
+    {0x0044,0x00},   // LCD Display Start Address Register 2
+    {0x0046,0x40},   // LCD Memory Address Offset Register 0
+    {0x0047,0x01},   // LCD Memory Address Offset Register 1
+    {0x0048,0x00},   // LCD Pixel Panning Register
+    {0x004A,0x00},   // LCD Display FIFO High Threshold Control Register
+    {0x004B,0x00},   // LCD Display FIFO Low Threshold Control Register
+    {0x0050,0x4F},   // CRT/TV Horizontal Display Width Register
+    {0x0052,0x13},   // CRT/TV Horizontal Non-Display Period Register
+    {0x0053,0x01},   // CRT/TV HRTC Start Position Register
+    {0x0054,0x0B},   // CRT/TV HRTC Pulse Width Register
+    {0x0056,0xDF},   // CRT/TV Vertical Display Height Register 0
+    {0x0057,0x01},   // CRT/TV Vertical Display Height Register 1
+    {0x0058,0x2B},   // CRT/TV Vertical Non-Display Period Register
+    {0x0059,0x09},   // CRT/TV VRTC Start Position Register
+    {0x005A,0x01},   // CRT/TV VRTC Pulse Width Register
+    {0x005B,0x00},   // TV Output Control Register
+    {0x0060,0x03},   // CRT/TV Display Mode Register
+    {0x0062,0x00},   // CRT/TV Display Start Address Register 0
+    {0x0063,0x00},   // CRT/TV Display Start Address Register 1
+    {0x0064,0x00},   // CRT/TV Display Start Address Register 2
+    {0x0066,0x40},   // CRT/TV Memory Address Offset Register 0
+    {0x0067,0x01},   // CRT/TV Memory Address Offset Register 1
+    {0x0068,0x00},   // CRT/TV Pixel Panning Register
+    {0x006A,0x00},   // CRT/TV Display FIFO High Threshold Control Register
+    {0x006B,0x00},   // CRT/TV Display FIFO Low Threshold Control Register
+    {0x0070,0x00},   // LCD Ink/Cursor Control Register
+    {0x0071,0x00},   // LCD Ink/Cursor Start Address Register
+    {0x0072,0x00},   // LCD Cursor X Position Register 0
+    {0x0073,0x00},   // LCD Cursor X Position Register 1
+    {0x0074,0x00},   // LCD Cursor Y Position Register 0
+    {0x0075,0x00},   // LCD Cursor Y Position Register 1
+    {0x0076,0x00},   // LCD Ink/Cursor Blue Color 0 Register
+    {0x0077,0x00},   // LCD Ink/Cursor Green Color 0 Register
+    {0x0078,0x00},   // LCD Ink/Cursor Red Color 0 Register
+    {0x007A,0x1F},   // LCD Ink/Cursor Blue Color 1 Register
+    {0x007B,0x3F},   // LCD Ink/Cursor Green Color 1 Register
+    {0x007C,0x1F},   // LCD Ink/Cursor Red Color 1 Register
+    {0x007E,0x00},   // LCD Ink/Cursor FIFO Threshold Register
+    {0x0080,0x00},   // CRT/TV Ink/Cursor Control Register
+    {0x0081,0x00},   // CRT/TV Ink/Cursor Start Address Register
+    {0x0082,0x00},   // CRT/TV Cursor X Position Register 0
+    {0x0083,0x00},   // CRT/TV Cursor X Position Register 1
+    {0x0084,0x00},   // CRT/TV Cursor Y Position Register 0
+    {0x0085,0x00},   // CRT/TV Cursor Y Position Register 1
+    {0x0086,0x00},   // CRT/TV Ink/Cursor Blue Color 0 Register
+    {0x0087,0x00},   // CRT/TV Ink/Cursor Green Color 0 Register
+    {0x0088,0x00},   // CRT/TV Ink/Cursor Red Color 0 Register
+    {0x008A,0x1F},   // CRT/TV Ink/Cursor Blue Color 1 Register
+    {0x008B,0x3F},   // CRT/TV Ink/Cursor Green Color 1 Register
+    {0x008C,0x1F},   // CRT/TV Ink/Cursor Red Color 1 Register
+    {0x008E,0x00},   // CRT/TV Ink/Cursor FIFO Threshold Register
+    {0x0100,0x00},   // BitBlt Control Register 0
+    {0x0101,0x00},   // BitBlt Control Register 1
+    {0x0102,0x00},   // BitBlt ROP Code/Color Expansion Register
+    {0x0103,0x00},   // BitBlt Operation Register
+    {0x0104,0x00},   // BitBlt Source Start Address Register 0
+    {0x0105,0x00},   // BitBlt Source Start Address Register 1
+    {0x0106,0x00},   // BitBlt Source Start Address Register 2
+    {0x0108,0x00},   // BitBlt Destination Start Address Register 0
+    {0x0109,0x00},   // BitBlt Destination Start Address Register 1
+    {0x010A,0x00},   // BitBlt Destination Start Address Register 2
+    {0x010C,0x00},   // BitBlt Memory Address Offset Register 0
+    {0x010D,0x00},   // BitBlt Memory Address Offset Register 1
+    {0x0110,0x00},   // BitBlt Width Register 0
+    {0x0111,0x00},   // BitBlt Width Register 1
+    {0x0112,0x00},   // BitBlt Height Register 0
+    {0x0113,0x00},   // BitBlt Height Register 1
+    {0x0114,0x00},   // BitBlt Background Color Register 0
+    {0x0115,0x00},   // BitBlt Background Color Register 1
+    {0x0118,0x00},   // BitBlt Foreground Color Register 0
+    {0x0119,0x00},   // BitBlt Foreground Color Register 1
+    {0x01E0,0x00},   // Look-Up Table Mode Register
+    {0x01E2,0x00},   // Look-Up Table Address Register
+    {0x01E4,0x00},   // Look-Up Table Data Register
+    {0x01F0,0x10},   // Power Save Configuration Register
+    {0x01F1,0x00},   // Power Save Status Register
+    {0x01F4,0x00},   // CPU-to-Memory Access Watchdog Timer Register
+    {0x01FC,0x01},   // Display Mode Register
+    {0, 0}
+};
+#endif /* CONFIG_VIDEO_SED13806_8BPP */
+
+#ifdef CONFIG_VIDEO_SED13806_16BPP
+
+static const S1D_REGS init_regs [] = 
+{
+    {0x0001,0x00},   // Miscellaneous Register
+    {0x01FC,0x00},   // Display Mode Register
+    {0x0004,0x1b},   // General IO Pins Configuration Register 0
+    {0x0005,0x00},   // General IO Pins Configuration Register 1
+    {0x0008,0xe5},   // General IO Pins Control Register 0
+    {0x0009,0x1f},   // General IO Pins Control Register 1
+    {0x0010,0x02},   // Memory Clock Configuration Register
+    {0x0014,0x10},   // LCD Pixel Clock Configuration Register
+    {0x0018,0x02},   // CRT/TV Pixel Clock Configuration Register
+    {0x001C,0x02},   // MediaPlug Clock Configuration Register
+    {0x001E,0x01},   // CPU To Memory Wait State Select Register
+    {0x0021,0x04},   // DRAM Refresh Rate Register
+    {0x002A,0x00},   // DRAM Timings Control Register 0
+    {0x002B,0x01},   // DRAM Timings Control Register 1
+    {0x0020,0x80},   // Memory Configuration Register
+    {0x0030,0x25},   // Panel Type Register
+    {0x0031,0x00},   // MOD Rate Register
+    {0x0032,0x4F},   // LCD Horizontal Display Width Register
+    {0x0034,0x13},   // LCD Horizontal Non-Display Period Register
+    {0x0035,0x01},   // TFT FPLINE Start Position Register
+    {0x0036,0x0B},   // TFT FPLINE Pulse Width Register
+    {0x0038,0xDF},   // LCD Vertical Display Height Register 0
+    {0x0039,0x01},   // LCD Vertical Display Height Register 1
+    {0x003A,0x2C},   // LCD Vertical Non-Display Period Register
+    {0x003B,0x00},   // TFT FPFRAME Start Position Register
+    {0x003C,0x01},   // TFT FPFRAME Pulse Width Register
+    {0x0040,0x05},   // LCD Display Mode Register
+    {0x0041,0x02},   // LCD Miscellaneous Register
+    {0x0042,0x00},   // LCD Display Start Address Register 0
+    {0x0043,0x00},   // LCD Display Start Address Register 1
+    {0x0044,0x00},   // LCD Display Start Address Register 2
+    {0x0046,0x80},   // LCD Memory Address Offset Register 0
+    {0x0047,0x02},   // LCD Memory Address Offset Register 1
+    {0x0048,0x00},   // LCD Pixel Panning Register
+    {0x004A,0x00},   // LCD Display FIFO High Threshold Control Register
+    {0x004B,0x00},   // LCD Display FIFO Low Threshold Control Register
+    {0x0050,0x4F},   // CRT/TV Horizontal Display Width Register
+    {0x0052,0x13},   // CRT/TV Horizontal Non-Display Period Register
+    {0x0053,0x01},   // CRT/TV HRTC Start Position Register
+    {0x0054,0x0B},   // CRT/TV HRTC Pulse Width Register
+    {0x0056,0xDF},   // CRT/TV Vertical Display Height Register 0
+    {0x0057,0x01},   // CRT/TV Vertical Display Height Register 1
+    {0x0058,0x2B},   // CRT/TV Vertical Non-Display Period Register
+    {0x0059,0x09},   // CRT/TV VRTC Start Position Register
+    {0x005A,0x01},   // CRT/TV VRTC Pulse Width Register
+    {0x005B,0x00},   // TV Output Control Register
+    {0x0060,0x05},   // CRT/TV Display Mode Register
+    {0x0062,0x00},   // CRT/TV Display Start Address Register 0
+    {0x0063,0x00},   // CRT/TV Display Start Address Register 1
+    {0x0064,0x00},   // CRT/TV Display Start Address Register 2
+    {0x0066,0x80},   // CRT/TV Memory Address Offset Register 0
+    {0x0067,0x02},   // CRT/TV Memory Address Offset Register 1
+    {0x0068,0x00},   // CRT/TV Pixel Panning Register
+    {0x006A,0x00},   // CRT/TV Display FIFO High Threshold Control Register
+    {0x006B,0x00},   // CRT/TV Display FIFO Low Threshold Control Register
+    {0x0070,0x00},   // LCD Ink/Cursor Control Register
+    {0x0071,0x00},   // LCD Ink/Cursor Start Address Register
+    {0x0072,0x00},   // LCD Cursor X Position Register 0
+    {0x0073,0x00},   // LCD Cursor X Position Register 1
+    {0x0074,0x00},   // LCD Cursor Y Position Register 0
+    {0x0075,0x00},   // LCD Cursor Y Position Register 1
+    {0x0076,0x00},   // LCD Ink/Cursor Blue Color 0 Register
+    {0x0077,0x00},   // LCD Ink/Cursor Green Color 0 Register
+    {0x0078,0x00},   // LCD Ink/Cursor Red Color 0 Register
+    {0x007A,0x1F},   // LCD Ink/Cursor Blue Color 1 Register
+    {0x007B,0x3F},   // LCD Ink/Cursor Green Color 1 Register
+    {0x007C,0x1F},   // LCD Ink/Cursor Red Color 1 Register
+    {0x007E,0x00},   // LCD Ink/Cursor FIFO Threshold Register
+    {0x0080,0x00},   // CRT/TV Ink/Cursor Control Register
+    {0x0081,0x00},   // CRT/TV Ink/Cursor Start Address Register
+    {0x0082,0x00},   // CRT/TV Cursor X Position Register 0
+    {0x0083,0x00},   // CRT/TV Cursor X Position Register 1
+    {0x0084,0x00},   // CRT/TV Cursor Y Position Register 0
+    {0x0085,0x00},   // CRT/TV Cursor Y Position Register 1
+    {0x0086,0x00},   // CRT/TV Ink/Cursor Blue Color 0 Register
+    {0x0087,0x00},   // CRT/TV Ink/Cursor Green Color 0 Register
+    {0x0088,0x00},   // CRT/TV Ink/Cursor Red Color 0 Register
+    {0x008A,0x1F},   // CRT/TV Ink/Cursor Blue Color 1 Register
+    {0x008B,0x3F},   // CRT/TV Ink/Cursor Green Color 1 Register
+    {0x008C,0x1F},   // CRT/TV Ink/Cursor Red Color 1 Register
+    {0x008E,0x00},   // CRT/TV Ink/Cursor FIFO Threshold Register
+    {0x0100,0x00},   // BitBlt Control Register 0
+    {0x0101,0x00},   // BitBlt Control Register 1
+    {0x0102,0x00},   // BitBlt ROP Code/Color Expansion Register
+    {0x0103,0x00},   // BitBlt Operation Register
+    {0x0104,0x00},   // BitBlt Source Start Address Register 0
+    {0x0105,0x00},   // BitBlt Source Start Address Register 1
+    {0x0106,0x00},   // BitBlt Source Start Address Register 2
+    {0x0108,0x00},   // BitBlt Destination Start Address Register 0
+    {0x0109,0x00},   // BitBlt Destination Start Address Register 1
+    {0x010A,0x00},   // BitBlt Destination Start Address Register 2
+    {0x010C,0x00},   // BitBlt Memory Address Offset Register 0
+    {0x010D,0x00},   // BitBlt Memory Address Offset Register 1
+    {0x0110,0x00},   // BitBlt Width Register 0
+    {0x0111,0x00},   // BitBlt Width Register 1
+    {0x0112,0x00},   // BitBlt Height Register 0
+    {0x0113,0x00},   // BitBlt Height Register 1
+    {0x0114,0x00},   // BitBlt Background Color Register 0
+    {0x0115,0x00},   // BitBlt Background Color Register 1
+    {0x0118,0x00},   // BitBlt Foreground Color Register 0
+    {0x0119,0x00},   // BitBlt Foreground Color Register 1
+    {0x01E0,0x01},   // Look-Up Table Mode Register
+    {0x01E2,0x00},   // Look-Up Table Address Register
+    {0x01E4,0x00},   // Look-Up Table Data Register
+    {0x01F0,0x10},   // Power Save Configuration Register
+    {0x01F1,0x00},   // Power Save Status Register
+    {0x01F4,0x00},   // CPU-to-Memory Access Watchdog Timer Register
+    {0x01FC,0x01},   // Display Mode Register
+    {0, 0}
+};
+
+#endif /* CONFIG_VIDEO_SED13806_16BPP */
+#endif /* CONFIG_NEC_NL6448BC20 */
+
+
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+
+/*-----------------------------------------------------------------------------
+ * video_get_info_str -- setup a board string: type, speed, etc.
+ * line_number= location to place info string beside logo
+ * info= buffer for info string
+ *-----------------------------------------------------------------------------
+ */
+void video_get_info_str (int line_number, char *info)
+{
+    if (line_number == 1) {
+        strcpy (info, " RPXClassic board");
+    }
+    else {
+        info [0] = '\0';
+    }
+
+}
+#endif
+
+/*-----------------------------------------------------------------------------
+ * board_video_init -- init de l'EPSON, config du CS
+ *-----------------------------------------------------------------------------
+ */
+unsigned int board_video_init (void)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+    /* Program ECCX registers                                                */
+    *(ECCX_CSR12) |= ECCX_860;
+    *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2;
+    *(ECCX_CSR8) |= ECCX_ENEPSON;
+    
+    memctl->memc_or2 = SED13806_OR;
+    memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES;
+
+    return (SED13806_REG_ADDR);
+}
+
+/*-----------------------------------------------------------------------------
+ * board_validate_screen -- 
+ *-----------------------------------------------------------------------------
+ */
+void board_validate_screen (unsigned int base)
+{
+    /* Activate the panel bias power                                         */
+    *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80;
+}
+/*-----------------------------------------------------------------------------
+ * board_get_regs -- 
+ *-----------------------------------------------------------------------------
+ */
+const S1D_REGS *board_get_regs (void)
+{
+    return (init_regs);
+}
+/*-----------------------------------------------------------------------------
+ * board_get_width -- 
+ *-----------------------------------------------------------------------------
+ */
+int board_get_width (void)
+{
+    return (DISPLAY_WIDTH);
+}
+
+/*-----------------------------------------------------------------------------
+ * board_get_height -- 
+ *-----------------------------------------------------------------------------
+ */
+int board_get_height (void)
+{
+    return (DISPLAY_HEIGHT);
+}
+
+#endif /* CONFIG_VIDEO_SED13806 */
diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S
index d739b81753c..934fabe981a 100644
--- a/board/eltec/bab7xx/asm_init.S
+++ b/board/eltec/bab7xx/asm_init.S
@@ -24,7 +24,7 @@
  */
 
 #include <config.h>
-#include <mpc75x.h>
+#include <74xx_7xx.h>
 #include <mpc106.h>
 #include <version.h>
 
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 6a758b2398d..32f27efaeb9 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -60,6 +60,12 @@ static void udelay_no_timer (int usec)
 
 int board_init ()
 {
+#if defined(CONFIG_MODEM_SUPPORT) && defined(CONFIG_VFD)
+	ulong size;
+	unsigned long addr;
+	extern void mem_malloc_init (ulong);
+	extern int drv_vfd_init(void);
+#endif
 	DECLARE_GLOBAL_DATA_PTR;
 
 	/* memory and cpu-speed are setup before relocation */
@@ -102,25 +108,24 @@ int board_init ()
 	gd->bd->bi_boot_params = 0x0c000100;
 
 #ifdef CONFIG_MODEM_SUPPORT
-	/* This stuff is needed by the CPLD to read keyboard data.
-	 * (Copied from the LCD initialization routine.)
-	 */
-	if (rLCDCON1 == 0) {
-		extern void init_grid_ctrl(void);
-
-		rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
-		rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
-#if 0
-		rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA;
+#ifdef CONFIG_VFD
+#ifndef PAGE_SIZE
+#define PAGE_SIZE 4096
 #endif
-		rLCDCON2 = 0x000DC000;
-		rLCDCON3 = 0x0051000A;
-		rLCDCON4 = 0x00000001;
-		rLCDCON5 = 0x00000440;
-		rLCDCON1 = 0x00000B75;
-
-		init_grid_ctrl();
-	}
+	/*
+	 * reserve memory for VFD display (always full pages)
+	 */
+	/* armboot_real_end is defined in the board-specific linker script */
+	addr = (_armboot_real_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+	size = vfd_setmem (addr);
+	gd->fb_base = addr;
+	/* round to the next page boundary */
+	addr += size;
+	addr = (addr + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+	mem_malloc_init (addr);
+	/* must do this after the framebuffer is allocated */
+	drv_vfd_init();
+#endif /* CONFIG_VFD */
 
 	udelay_no_timer (KBD_MDELAY);
 
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index 1ea483f0c6b..7377b4df1a3 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -339,9 +339,14 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
 int drv_vfd_init(void)
 {
 	ulong palette;
+	static int vfd_init_done = 0;
 
 	DECLARE_GLOBAL_DATA_PTR;
 
+	if (vfd_init_done != 0)
+		return;
+	vfd_init_done = 1;
+
 	vfdbase = gd->fb_base;
 	create_vfd_table();
 	init_grid_ctrl();
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 8b54585bfa0..4c799a52dde 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -2062,7 +2062,7 @@ static int hardware_enable(int slot)
 	/*
 	 * Power On.
 	 */
-	printf("\n Slot %c:", 'A' + slot);
+	printf("%s  Slot %c:", slot ? "" : "\n", 'A' + slot);
 	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
 	reg  = pcmp->pcmc_pipr;
 	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
diff --git a/common/devices.c b/common/devices.c
index 7489eac41ec..8bd0e64e3f7 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -177,7 +177,7 @@ int devices_init (void)
 #ifdef CONFIG_LCD
 	drv_lcd_init ();
 #endif
-#ifdef CONFIG_VIDEO
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
 	drv_video_init ();
 #endif
 #ifdef CONFIG_WL_4PPM_KEYBOARD
diff --git a/common/main.c b/common/main.c
index 08d54c5c140..3e92649ced3 100644
--- a/common/main.c
+++ b/common/main.c
@@ -21,6 +21,8 @@
  * MA 02111-1307 USA
  */
 
+/* #define	DEBUG	*/
+
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
@@ -304,9 +306,7 @@ void main_loop (void)
 	s = getenv ("bootdelay");
 	bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
 
-#if 0
-	printf ("### main_loop entered:\n\n");
-#endif
+	debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
 
 # ifdef CONFIG_BOOT_RETRY_TIME
 	s = getenv ("bootretry");
@@ -319,6 +319,9 @@ void main_loop (void)
 # endif	/* CONFIG_BOOT_RETRY_TIME */
 
 	s = getenv ("bootcmd");
+
+	debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
+
 	if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
 # ifdef CONFIG_AUTOBOOT_KEYED
 		int prev = disable_ctrlc(1);	/* disable Control C checking */
@@ -337,11 +340,9 @@ void main_loop (void)
 	}
 
 # ifdef CONFIG_MENUKEY
-	if (menukey == CONFIG_MENUKEY)
-	{
+	if (menukey == CONFIG_MENUKEY) {
 	    s = getenv("menucmd");
-	    if (s)
-	    {
+	    if (s) {
 # ifndef CFG_HUSH_PARSER
 		run_command (s, bd, 0);
 # else
diff --git a/drivers/Makefile b/drivers/Makefile
index 3d3bbcef96c..afea752246e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -31,7 +31,7 @@ OBJS	= 3c589.o 5701rls.o bcm570x.o bcm570x_autoneg.o \
 	  cfb_console.o cs8900.o dc2114x.o eepro100.o \
 	  i8042.o natsemi.o ns16550.o ns8382x.o ns87308.o \
 	  pci.o pci_auto.o pci_indirect.o \
-	  pcnet.o serial.o \
+	  pcnet.o sed13806.o serial.o \
 	  smc91111.o smiLynxEM.o sym53c8xx.o \
 	  tigon3.o w83c553f.o ct69000.o
 
diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c
index ee2fa9c8453..d428b174eca 100644
--- a/drivers/cfb_console.c
+++ b/drivers/cfb_console.c
@@ -65,6 +65,7 @@
  CONFIG_CONSOLE_TIME         - display time/date in upper right corner,
                                needs CFG_CMD_DATE and CONFIG_CONSOLE_CURSOR
  CONFIG_VIDEO_LOGO           - display Linux Logo in upper left corner
+ CONFIG_VIDEO_BMP_LOGO       - use bmp_logo instead of linux_logo
  CONFIG_CONSOLE_EXTRA_INFO   - display additional board information strings
                                that normaly goes to serial port. This define
                                requires a board specific function:
@@ -93,6 +94,8 @@ CONFIG_VIDEO_HW_CURSOR:      - Uses the hardware cursor capability of the
 
 #ifdef CONFIG_CFB_CONSOLE
 
+#include <malloc.h>
+
 /*****************************************************************************/
 /* Console device defines with SMI graphic                                   */
 /* Any other graphic must change this section                                */
@@ -116,6 +119,16 @@ CONFIG_VIDEO_HW_CURSOR:      - Uses the hardware cursor capability of the
 #endif
 
 /*****************************************************************************/
+/* Defines for the SED13806 driver                                           */
+/*****************************************************************************/
+#ifdef CONFIG_VIDEO_SED13806
+
+#define VIDEO_FB_LITTLE_ENDIAN
+#define VIDEO_HW_RECTFILL
+#define VIDEO_HW_BITBLT
+#endif
+
+/*****************************************************************************/
 /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc             */
 /*****************************************************************************/
 #include <video_fb.h>
@@ -217,6 +230,14 @@ void    console_cursor (int state);
 #endif  /* CONFIG_VIDEO_HW_CURSOR */
 
 #ifdef  CONFIG_VIDEO_LOGO
+#ifdef  CONFIG_VIDEO_BMP_LOGO
+#include <bmp_logo.h>
+#define VIDEO_LOGO_WIDTH        BMP_LOGO_WIDTH
+#define VIDEO_LOGO_HEIGHT       BMP_LOGO_HEIGHT
+#define VIDEO_LOGO_LUT_OFFSET   BMP_LOGO_OFFSET
+#define VIDEO_LOGO_COLORS       BMP_LOGO_COLORS
+
+#else   /* CONFIG_VIDEO_BMP_LOGO */
 #define LINUX_LOGO_WIDTH        80
 #define LINUX_LOGO_HEIGHT       80
 #define LINUX_LOGO_COLORS       214
@@ -225,13 +246,15 @@ void    console_cursor (int state);
 #include <linux_logo.h>
 #define VIDEO_LOGO_WIDTH        LINUX_LOGO_WIDTH
 #define VIDEO_LOGO_HEIGHT       LINUX_LOGO_HEIGHT
-
+#define VIDEO_LOGO_LUT_OFFSET   LINUX_LOGO_LUT_OFFSET
+#define VIDEO_LOGO_COLORS       LINUX_LOGO_COLORS
+#endif  /* CONFIG_VIDEO_BMP_LOGO */
 #define VIDEO_INFO_X            (VIDEO_LOGO_WIDTH)
 #define VIDEO_INFO_Y            (VIDEO_FONT_HEIGHT/2)
-#else
+#else   /* CONFIG_VIDEO_LOGO */
 #define VIDEO_LOGO_WIDTH        0
 #define VIDEO_LOGO_HEIGHT       0
-#endif
+#endif  /* CONFIG_VIDEO_LOGO */
 
 #define VIDEO_COLS              VIDEO_VISIBLE_COLS
 #define VIDEO_ROWS              VIDEO_VISIBLE_ROWS
@@ -463,11 +486,7 @@ static inline void video_drawstring(int xx, int yy, unsigned char *s)
 
 static void video_putchar(int xx, int yy, unsigned char c)
 {
-#ifdef CONFIG_VIDEO_LOGO
     video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
-#else
-    video_drawchars (xx, yy, &c, 1);
-#endif
 }
 
 /*****************************************************************************/
@@ -676,83 +695,107 @@ void video_puts (const char *s)
 #ifdef CONFIG_VIDEO_LOGO
 void logo_plot (void *screen, int width, int x, int y)
 {
-    int skip = (width - LINUX_LOGO_WIDTH) * VIDEO_PIXEL_SIZE,
+
+    int skip = (width - VIDEO_LOGO_WIDTH) * VIDEO_PIXEL_SIZE,
         xcount, i,
-        ycount = LINUX_LOGO_HEIGHT;
+        ycount = VIDEO_LOGO_HEIGHT;
     unsigned char
-        *source = linux_logo,
+        *source,
         *dest   = (unsigned char *) screen + ((y * width * VIDEO_PIXEL_SIZE) + x),
-        r, g, b;
-
+        r, g, b, *logo_red, *logo_blue, *logo_green;
+
+#ifdef CONFIG_VIDEO_BMP_LOGO
+    source = bmp_logo_bitmap;
+    
+    /* Allocate temporary space for computing colormap                       */
+    logo_red = malloc (BMP_LOGO_COLORS);
+    logo_green = malloc (BMP_LOGO_COLORS);
+    logo_blue = malloc (BMP_LOGO_COLORS);
+    /* Compute color map                                                     */
+    for (i = 0; i < VIDEO_LOGO_COLORS; i++) {
+        logo_red [i] = (bmp_logo_palette [i] & 0x0f00) >> 4;
+        logo_green [i] = (bmp_logo_palette [i] & 0x00f0);
+        logo_blue [i] = (bmp_logo_palette [i] & 0x000f) << 4;
+    }
+#else
+    source = linux_logo;
+    logo_red = linux_logo_red;
+    logo_green = linux_logo_green;
+    logo_blue = linux_logo_blue;
+#endif
+    
     if (VIDEO_DATA_FORMAT == GDF__8BIT_INDEX)
     {
-        for (i = 0; i < LINUX_LOGO_COLORS; i++)
+        for (i = 0; i < VIDEO_LOGO_COLORS; i++)
         {
-            r = (unsigned char)linux_logo_red  [i];
-            g = (unsigned char)linux_logo_green[i];
-            b = (unsigned char)linux_logo_blue [i];
-            video_set_lut (LINUX_LOGO_LUT_OFFSET + i, r, g, b);
+            video_set_lut (i + VIDEO_LOGO_LUT_OFFSET,
+                           logo_red [i], logo_green [i], logo_blue [i]);
         }
     }
 
     while (ycount--)
     {
-    xcount = LINUX_LOGO_WIDTH;
-    while (xcount--)
-    {
-        r = (unsigned char)linux_logo_red  [*source - LINUX_LOGO_LUT_OFFSET];
-        g = (unsigned char)linux_logo_green[*source - LINUX_LOGO_LUT_OFFSET];
-        b = (unsigned char)linux_logo_blue [*source - LINUX_LOGO_LUT_OFFSET];
-
-        switch (VIDEO_DATA_FORMAT)
+        xcount = VIDEO_LOGO_WIDTH;
+        while (xcount--)
         {
-        case GDF__8BIT_INDEX:
-            *dest = *source;
-            break;
-        case GDF__8BIT_332RGB:
-            *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6);
-            break;
-        case GDF_15BIT_555RGB:
-            *(unsigned short *)dest =
-            SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3)));
-            break;
-        case GDF_16BIT_565RGB:
-            *(unsigned short *)dest =
-            SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3)));
-            break;
-        case GDF_32BIT_X888RGB:
-            *(unsigned long  *)dest =
-            SWAP32((unsigned long)((r<<16) | (g<<8) | b));
-            break;
-        case GDF_24BIT_888RGB:
+            r = logo_red [*source - VIDEO_LOGO_LUT_OFFSET];
+            g = logo_green [*source - VIDEO_LOGO_LUT_OFFSET];
+            b = logo_blue [*source - VIDEO_LOGO_LUT_OFFSET];
+            
+            switch (VIDEO_DATA_FORMAT)
+            {
+            case GDF__8BIT_INDEX:
+                *dest = *source;
+                break;
+            case GDF__8BIT_332RGB:
+                *dest = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6);
+                break;
+            case GDF_15BIT_555RGB:
+                *(unsigned short *)dest =
+                    SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3)));
+                break;
+            case GDF_16BIT_565RGB:
+                *(unsigned short *)dest =
+                    SWAP16((unsigned short)(((r>>3)<<11) | ((g>>2)<<5) | (b>>3)));
+                break;
+            case GDF_32BIT_X888RGB:
+                *(unsigned long  *)dest =
+                    SWAP32((unsigned long)((r<<16) | (g<<8) | b));
+                break;
+            case GDF_24BIT_888RGB:
 #ifdef VIDEO_FB_LITTLE_ENDIAN
-            dest[0] = b;
-            dest[1] = g;
-            dest[2] = r;
+                dest[0] = b;
+                dest[1] = g;
+                dest[2] = r;
 #else
-            dest[0] = r;
-            dest[1] = g;
-            dest[2] = b;
+                dest[0] = r;
+                dest[1] = g;
+                dest[2] = b;
 #endif
-            break;
+                break;
+            }
+            source++;
+            dest += VIDEO_PIXEL_SIZE;
         }
-        source++;
-        dest += VIDEO_PIXEL_SIZE;
-    }
-    dest += skip;
+        dest += skip;
     }
+#ifdef CONFIG_VIDEO_BMP_LOGO
+    free (logo_red);
+    free (logo_green);
+    free (logo_blue);
+#endif
 }
 
-
 /*****************************************************************************/
 
 static void *video_logo (void)
 {
     char info[128];
+    extern char version_string;
 
     logo_plot (video_fb_address, VIDEO_COLS, 0, 0);
 
-    sprintf(info, " %s (%s - %s)", U_BOOT_VERSION, __DATE__, __TIME__);
+    sprintf(info, " %s", &version_string);
     video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
 
 #ifdef CONFIG_CONSOLE_EXTRA_INFO
diff --git a/drivers/sed13806.c b/drivers/sed13806.c
new file mode 100644
index 00000000000..55fceef9486
--- /dev/null
+++ b/drivers/sed13806.c
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* Video support for Epson SED13806 chipset                                  */
+
+#include <common.h>
+
+#ifdef CONFIG_VIDEO_SED13806
+
+#include <video_fb.h>
+#include <sed13806.h>
+
+#define readByte(ptrReg)                \
+    *(volatile unsigned char *)(sed13806.isaBase + ptrReg)
+
+#define writeByte(ptrReg,value) \
+    *(volatile unsigned char *)(sed13806.isaBase + ptrReg) = value
+
+#define writeWord(ptrReg,value) \
+    (*(volatile unsigned short *)(sed13806.isaBase + ptrReg) = ((value >> 8 ) & 0xff) | ((value << 8) & 0xff00))
+
+
+GraphicDevice sed13806;
+
+/*-----------------------------------------------------------------------------
+ * EpsonSetRegs -- 
+ *-----------------------------------------------------------------------------
+ */
+static void EpsonSetRegs (void)
+{
+    /* the content of the chipset register depends on the board (clocks, ...)*/
+    const S1D_REGS *preg = board_get_regs ();
+    while (preg -> Index) {
+        writeByte (preg -> Index, preg -> Value);
+        preg ++;
+    }
+}
+    
+/*-----------------------------------------------------------------------------
+ * video_hw_init -- 
+ *-----------------------------------------------------------------------------
+ */
+void *video_hw_init (void)
+{
+    unsigned int *vm, i;
+
+    memset (&sed13806, 0, sizeof (GraphicDevice));
+
+    /* Initialization of the access to the graphic chipset
+       Retreive base address of the chipset
+       (see board/RPXClassic/eccx.c)                                         */
+    if ((sed13806.isaBase = board_video_init ()) == 0) {
+        return (NULL);
+    }
+
+    sed13806.frameAdrs = sed13806.isaBase + FRAME_BUFFER_OFFSET;
+    sed13806.winSizeX = board_get_width ();
+    sed13806.winSizeY = board_get_height ();
+
+#if defined(CONFIG_VIDEO_SED13806_8BPP)
+    sed13806.gdfIndex = GDF__8BIT_INDEX;
+    sed13806.gdfBytesPP = 1;
+    
+#elif defined(CONFIG_VIDEO_SED13806_16BPP)
+    sed13806.gdfIndex = GDF_16BIT_565RGB;
+    sed13806.gdfBytesPP = 2;
+
+#else
+#error Unsupported SED13806 BPP
+#endif
+
+    sed13806.memSize = sed13806.winSizeX * sed13806.winSizeY * sed13806.gdfBytesPP;
+
+    /* Load SED registers                                                    */
+    EpsonSetRegs ();
+
+    /* (see board/RPXClassic/RPXClassic.c)                                   */
+    board_validate_screen (sed13806.isaBase);
+
+    /* Clear video memory */
+    i = sed13806.memSize/4;
+    vm = (unsigned int *)sed13806.frameAdrs;
+    while(i--)
+        *vm++ = 0;
+    
+    
+    return (&sed13806);
+}
+/*-----------------------------------------------------------------------------
+ * Epson_wait_idle -- Wait for hardware to become idle
+ *-----------------------------------------------------------------------------
+ */
+static void Epson_wait_idle (void)
+{
+    while (readByte (BLT_CTRL0) & 0x80);
+
+    /* Read a word in the BitBLT memory area to shutdown the BitBLT engine   */
+    *(volatile unsigned short *)(sed13806.isaBase + BLT_REG);
+}
+
+/*-----------------------------------------------------------------------------
+ * video_hw_bitblt -- 
+ *-----------------------------------------------------------------------------
+ */
+void video_hw_bitblt (
+    unsigned int bpp,             /* bytes per pixel */
+    unsigned int src_x,           /* source pos x */
+    unsigned int src_y,           /* source pos y */
+    unsigned int dst_x,           /* dest pos x */
+    unsigned int dst_y,           /* dest pos y */
+    unsigned int dim_x,           /* frame width */
+    unsigned int dim_y            /* frame height */
+    )
+{
+    register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
+    unsigned long	srcAddr, dstAddr;
+    unsigned int stride = bpp * pGD -> winSizeX;
+
+    srcAddr = (src_y * stride) + (src_x * bpp);
+    dstAddr = (dst_y * stride) + (dst_x * bpp);
+
+    Epson_wait_idle ();
+    
+    writeByte(BLT_ROP,0x0C);	// source
+    writeByte(BLT_OP,0x02);// move blit in positive direction with ROP
+    writeWord(BLT_MEM_OFF0, stride / 2);
+    if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
+        writeByte(BLT_CTRL1,0x00);
+    }
+    else {
+        writeByte(BLT_CTRL1,0x01);
+    }
+
+    writeWord(BLT_WIDTH0,(dim_x - 1));
+    writeWord(BLT_HEIGHT0,(dim_y - 1));
+    
+    /* set up blit registers                                                 */
+    writeByte(BLT_SRC_ADDR0,srcAddr);
+    writeByte(BLT_SRC_ADDR1,srcAddr>>8); 
+    writeByte(BLT_SRC_ADDR2,srcAddr>>16); 
+    
+    writeByte(BLT_DST_ADDR0,dstAddr);
+    writeByte(BLT_DST_ADDR1,dstAddr>>8); 
+    writeByte(BLT_DST_ADDR2,dstAddr>>16); 
+    
+    /* Engage the blt engine                                                 */
+    /* rectangular region for src and dst                                    */
+    writeByte(BLT_CTRL0,0x80);
+
+    /* wait untill current blits finished                                    */
+    Epson_wait_idle ();
+}
+/*-----------------------------------------------------------------------------
+ * video_hw_rectfill -- 
+ *-----------------------------------------------------------------------------
+ */
+void video_hw_rectfill (
+    unsigned int bpp,             /* bytes per pixel */
+    unsigned int dst_x,           /* dest pos x */
+    unsigned int dst_y,           /* dest pos y */
+    unsigned int dim_x,           /* frame width */
+    unsigned int dim_y,           /* frame height */
+    unsigned int color            /* fill color */
+     )
+{
+    register GraphicDevice *pGD = (GraphicDevice *)&sed13806;
+    unsigned long	dstAddr;
+    unsigned int stride = bpp * pGD -> winSizeX;
+
+    dstAddr = (dst_y * stride) + (dst_x * bpp);
+
+    Epson_wait_idle ();
+
+    /* set up blit registers                                                 */
+    writeByte(BLT_DST_ADDR0,dstAddr);
+    writeByte(BLT_DST_ADDR1,dstAddr>>8); 
+    writeByte(BLT_DST_ADDR2,dstAddr>>16); 
+
+    writeWord(BLT_WIDTH0,(dim_x - 1));
+    writeWord(BLT_HEIGHT0,(dim_y - 1));
+    writeWord(BLT_FGCOLOR0,color);
+
+    writeByte(BLT_OP,0x0C);  /* solid fill                                   */
+    writeWord(BLT_MEM_OFF0,stride / 2);
+
+    if (pGD -> gdfIndex == GDF__8BIT_INDEX) {
+        writeByte(BLT_CTRL1,0x00);
+    }
+    else {
+        writeByte(BLT_CTRL1,0x01);
+    }
+	
+    /* Engage the blt engine                                                 */
+    /* rectangular region for src and dst                                    */
+    writeByte(BLT_CTRL0,0x80);
+
+    /* wait untill current blits finished                                    */
+    Epson_wait_idle ();
+}
+
+/*-----------------------------------------------------------------------------
+ * video_set_lut -- 
+ *-----------------------------------------------------------------------------
+ */
+void video_set_lut (
+    unsigned int index,           /* color number */
+    unsigned char r,              /* red */
+    unsigned char g,              /* green */
+    unsigned char b               /* blue */
+    )
+{
+    writeByte(REG_LUT_ADDR, index );
+    writeByte(REG_LUT_DATA, r);
+    writeByte(REG_LUT_DATA, g);
+    writeByte(REG_LUT_DATA, b);
+}
+#ifdef CONFIG_VIDEO_HW_CURSOR
+/*-----------------------------------------------------------------------------
+ * video_set_hw_cursor -- 
+ *-----------------------------------------------------------------------------
+ */
+void video_set_hw_cursor (int x, int y)
+{
+    writeByte (LCD_CURSOR_XL, (x & 0xff));
+    writeByte (LCD_CURSOR_XM, (x >> 8));
+    writeByte (LCD_CURSOR_YL, (y & 0xff));
+    writeByte (LCD_CURSOR_YM, (y >> 8));
+}
+
+/*-----------------------------------------------------------------------------
+ * video_init_hw_cursor -- 
+ *-----------------------------------------------------------------------------
+ */
+void video_init_hw_cursor (int font_width, int font_height)
+{
+    volatile unsigned char *ptr;
+    unsigned char pattern;
+    int i;
+    
+
+    /* Init cursor content
+       Cursor size is 64x64 pixels
+       Start of the cursor memory depends on panel type (dual panel ...)     */
+    if ((i = readByte (LCD_CURSOR_START)) == 0) {
+        ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - HWCURSORSIZE);
+    }
+    else {
+        ptr = (unsigned char *)(sed13806.frameAdrs + DEFAULT_VIDEO_MEMORY_SIZE - (i * 8192));
+    }
+
+    /* Fill the first line and the first empty line after cursor             */
+    for (i = 0, pattern = 0; i < 64; i++) {
+        if (i < font_width) {
+            /* Invert background                                             */
+            pattern |= 0x3;
+            
+        }
+        else {
+            /* Background                                                    */
+            pattern |= 0x2;
+        }
+        if ((i & 3) == 3) {
+            *ptr = pattern;
+            *(ptr + font_height * 16) = 0xaa;
+            ptr ++;
+            pattern = 0;
+        }
+        pattern <<= 2;
+    }
+
+    /* Duplicate this line                                                   */
+    for (i = 1; i < font_height; i++) {
+        memcpy ((void *)ptr, (void *)(ptr - 16), 16);
+        ptr += 16;
+    }
+    
+    for (; i < 64; i++) {
+        memcpy ((void *)(ptr + 16), (void *)ptr, 16);
+        ptr += 16;
+    }
+
+    /* Select cursor mode                                                    */
+    writeByte (LCD_CURSOR_CNTL, 1);
+}
+#endif
+#endif
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 6de004f79d7..7dc1b90d174 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -45,7 +45,7 @@
 #if 0
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second	*/
+#define CONFIG_BOOTDELAY	5	/* autoboot after 1 second	*/
 #endif
 
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
@@ -429,10 +429,12 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 
+#if NOT_USED_FOR_NOW
 #define CONFIG_AUTOBOOT_KEYED		/* use key strings to stop autoboot */
 #if 0
 #define CONFIG_AUTOBOOT_PROMPT		"Boote in %d Sekunden - stop mit \"2\"\n"
 #endif
 #define CONFIG_AUTOBOOT_STOP_STR	"2" /* easy to stop for now */
+#endif /* NOT_USED_FOR_NOW */
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index d742a25dcbc..f20b8f99ac1 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -47,13 +47,27 @@
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		9600	/* console baudrate = 9600bps	*/
 
-
 /* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1   */
-#undef CONFIG_FEC_ENET
+#define CONFIG_FEC_ENET
 #ifdef CONFIG_FEC_ENET
 #define CFG_DISCOVER_PHY        1
+#define CONFIG_MII              1
 #endif /* CONFIG_FEC_ENET */
 
+/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard         */
+#if 1
+#define CONFIG_VIDEO_SED13806
+#define CONFIG_NEC_NL6448BC20
+#define CONFIG_VIDEO_SED13806_16BPP
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#endif
+
 #if 0
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
@@ -168,7 +182,7 @@
 #define	CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE	0xFF000000
 
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || (CONFIG_COMMANDS & CFG_CMD_IDE) 
 #define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #else
 #define	CFG_MONITOR_LEN		(128 << 10)	/* Reserve 128 kB for Monitor	*/
@@ -196,7 +210,8 @@
 #if 0
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x20000	/*   Offset   of Environment Sector  */
-#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector  */
+#define CFG_ENV_SECT_SIZE       0x8000
+#define	CFG_ENV_SIZE		0x8000	/* Total Size of Environment Sector  */
 #else
 #define CFG_ENV_IS_IN_NVRAM     1
 #define CFG_ENV_ADDR            0xfa000100
@@ -353,6 +368,48 @@
 #define	CFG_BR4_PRELIM	0xFA000401		/* NVRAM&SRAM */
 #define CFG_OR4_PRELIM	0xFFF80970
 
+/* ECCX CS settings                                                          */
+#define SED13806_OR             0xFFC00108     /* - 4 Mo
+                                                   - Burst inhibit
+                                                   - external TA             */
+#define SED13806_REG_ADDR       0xa0000000
+#define SED13806_ACCES          0x801           /* 16 bit access             */
+
+
+/* Global definitions for the ECCX board                                     */
+#define ECCX_CSR_ADDR           (0xfac00000)
+#define ECCX_CSR8_OFFSET        (0x8)
+#define ECCX_CSR11_OFFSET       (0xB)
+#define ECCX_CSR12_OFFSET       (0xC)
+
+#define ECCX_CSR8  (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET)
+#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET)
+#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET)
+
+
+#define REG_GPIO_CTRL 0x008
+
+/* Definitions for CSR8                                                      */
+#define ECCX_ENEPSON            0x80    /* Bit 0:
+                                           0= disable and reset SED1386
+                                           1= enable SED1386                 */
+/* Bit 1:   0= SED1386 in Big Endian mode                                    */
+/*          1= SED1386 in little endian mode                                 */
+#define ECCX_LE                 0x40
+#define ECCX_BE                 0x00
+
+/* Bit 2,3: Selection                                                        */
+/*      00 = Disabled                                                        */
+/*      01 = CS2 is used for the SED1386                                     */
+/*      10 = CS5 is used for the SED1386                                     */
+/*      11 = reserved                                                        */
+#define ECCX_CS2                0x10
+#define ECCX_CS5                0x20
+
+/* Definitions for CSR12                                                     */
+#define ECCX_ID                 0x02
+#define ECCX_860                0x01
+
 /*
  * Memory Periodic Timer Prescaler
  */
diff --git a/include/devices.h b/include/devices.h
index b1e1ebdfd7d..875710d3516 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -99,7 +99,7 @@ int	drv_lcd_init (void);
 #ifdef CONFIG_VFD
 int	drv_vfd_init (void);
 #endif
-#ifdef CONFIG_VIDEO
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
 int	drv_video_init (void);
 #endif
 #ifdef CONFIG_WL_4PPM_KEYBOARD
diff --git a/include/sed13806.h b/include/sed13806.h
new file mode 100644
index 00000000000..70e8e87449c
--- /dev/null
+++ b/include/sed13806.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2002
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* Video support for Epson SED13806 chipset                                  */
+
+
+#ifndef _SED13806_H_
+#define _SED13806_H_
+
+
+/* General definitions                                                       */
+#define FRAME_BUFFER_OFFSET        0x200000     /* Frame buffer offset */
+#define TOTAL_SPACE_SIZE           0x400000
+
+#define DEFAULT_VIDEO_MEMORY_SIZE  0x140000     /* Video Memory Size */
+
+#define HWCURSORSIZE 		   1024     /* Size of memory reserved
+                                                   for HW cursor*/ 
+
+/* Offset of chipset registers                                               */
+#define	BLT_CTRL0	(0x0100)
+#define	BLT_CTRL1	(0x0101)
+#define BLT_ROP		(0x0102)
+#define	BLT_OP		(0x0103)
+#define BLT_SRC_ADDR0	(0x0104)
+#define	BLT_SRC_ADDR1	(0x0105)
+#define	BLT_SRC_ADDR2	(0x0106)
+#define	BLT_DST_ADDR0	(0x0108)
+#define BLT_DST_ADDR1	(0x0109)
+#define	BLT_DST_ADDR2	(0x010A)
+#define BLT_MEM_OFF0	(0x010C)
+#define BLT_MEM_OFF1	(0x010D)
+#define BLT_WIDTH0	(0x0110)
+#define BLT_WIDTH1	(0x0111)
+#define BLT_HEIGHT0	(0x0112)
+#define BLT_HEIGHT1	(0x0113)
+#define	BLT_BGCOLOR0	(0x0114)
+#define	BLT_BGCOLOR1	(0x0115)
+#define	BLT_FGCOLOR0	(0x0118)
+#define BLT_FGCOLOR1	(0x0119)
+
+#define BLT_REG         (0x100000)
+
+/* Lookup table registers                                                    */
+#define REG_LUT_ADDR 0x1e2
+#define REG_LUT_DATA 0x1e4
+
+/* Cursor/Ink registers                                                      */
+#define LCD_CURSOR_CNTL         (0x0070)
+#define LCD_CURSOR_START        (0x0071)
+#define LCD_CURSOR_XL           (0x0072)
+#define LCD_CURSOR_XM           (0x0073)
+#define LCD_CURSOR_YL           (0x0074)
+#define LCD_CURSOR_YM           (0x0075)
+#define LCD_CURSOR_COL0_B       (0x0076)
+#define LCD_CURSOR_COL0_G       (0x0077)
+#define LCD_CURSOR_COL0_R       (0x0078)
+#define LCD_CURSOR_COL1_B       (0x007A)
+#define LCD_CURSOR_COL1_G       (0x007B)
+#define LCD_CURSOR_COL1_R       (0x007C)
+#define LCD_CURSOR_FIFO         (0x007E)
+
+typedef struct
+{
+    unsigned short      Index;
+    unsigned char       Value;
+} S1D_REGS;
+
+
+
+/* Board specific functions                                                  */
+unsigned int board_video_init (void);
+void board_validate_screen (unsigned int base);
+const S1D_REGS *board_get_regs (void);
+int board_get_width (void);
+int board_get_height (void);
+
+#endif /* _SED13806_H_ */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 47dc53ce1b2..b6b5cdb762f 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -46,7 +46,10 @@ static ulong mem_malloc_start = 0;
 static ulong mem_malloc_end = 0;
 static ulong mem_malloc_brk = 0;
 
-static void mem_malloc_init (ulong dest_addr)
+#if !defined(CONFIG_MODEM_SUPPORT)
+static
+#endif
+void mem_malloc_init (ulong dest_addr)
 {
 	mem_malloc_start = dest_addr;
 	mem_malloc_end = dest_addr + CFG_MALLOC_LEN;
@@ -184,7 +187,7 @@ void start_armboot (void)
 	gd_t gd_data;
 	bd_t bd_data;
 	init_fnc_t **init_fnc_ptr;
-#ifdef CONFIG_VFD
+#if defined(CONFIG_VFD) && !defined(CONFIG_MODEM_SUPPORT)
 	unsigned long addr;
 #endif
 
@@ -205,6 +208,7 @@ void start_armboot (void)
 	display_flash_config (size);
 
 #ifdef CONFIG_VFD
+#ifndef CONFIG_MODEM_SUPPORT
 #ifndef PAGE_SIZE
 #define PAGE_SIZE 4096
 #endif
@@ -219,14 +223,17 @@ void start_armboot (void)
 	addr += size;
 	addr = (addr + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
 	mem_malloc_init (addr);
+#endif /* CONFIG_MODEM_SUPPORT */
 #else
 	/* armboot_real_end is defined in the board-specific linker script */
 	mem_malloc_init (_armboot_real_end);
 #endif /* CONFIG_VFD */
 
 #ifdef CONFIG_VFD
+#ifndef CONFIG_MODEM_SUPPORT
 	/* must do this after the framebuffer is allocated */
 	drv_vfd_init();
+#endif /* CONFIG_MODEM_SUPPORT */
 #endif
 	/* initialize environment */
 	env_relocate ();
diff --git a/post/memory.c b/post/memory.c
index 7d55a6d5cee..6884abdb18f 100644
--- a/post/memory.c
+++ b/post/memory.c
@@ -266,7 +266,7 @@ static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
 	ulong xor;
 	int   ret = 0;
 
-	end = base + size;
+	end = (ulong *)((ulong)base + size);	/* pointer arith! */
 	xor = 0;
 	for(xor = sizeof(ulong); xor > 0; xor <<= 1) {
 		target = (ulong *)((ulong)testaddr ^ xor);
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 0f99f3b4ac0..095880e6af0 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -250,8 +250,9 @@ NXTARG:		;
 	 */
 	if (xflag) {
 		if (ep != addr + sizeof(image_header_t)) {
-			fprintf (stderr, "%s: For XIP, the entry point must be the load addr + %d\n",
-				cmdname, sizeof(image_header_t));
+			fprintf (stderr, "%s: For XIP, the entry point must be the load addr + %lu\n",
+				cmdname,
+				(unsigned long)sizeof(image_header_t));
 			exit (EXIT_FAILURE);
 		}
 	}