Disable autoboot abort for FO300 when silent mode is enabled

(according to S1 switch setting).
Patch by Marian Balakowicz, 12 Sep 2006

2 files changed, 47 insertions, 30 deletions

diff --git a/CHANGELOG b/CHANGELOG
index a25134fa73c..a896e253a96 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Disable autoboot abort for FO300 when silent mode is enabled
+  (according to S1 switch setting).
+
 * Cleanup examples binaries
 
 * Add NAND environment support for PPC440EPx Sequoia NAND boot config
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 2a0d542ef8b..b76579cb43f 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -446,6 +446,43 @@ int board_early_init_r (void)
 #endif
 #endif /* CONFIG_PS2MULT */
 
+#ifdef CONFIG_FO300
+int silent_boot (void)
+{
+	vu_long timer3_status;
+
+	/* Configure GPT3 as GPIO input */
+	*(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+	/* Read in TIMER_3 pin status */
+	timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+	/* Force silent console mode if S1 switch
+	 * is in closed position (TIMER_3 pin status is LOW). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+		return 1;
+#else
+	/* Force silent console mode if S1 switch
+	 * is in open position (TIMER_3 pin status is HIGH). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+		return 1;
+#endif
+
+	return 0;
+}
+
+int board_early_init_f (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	if (silent_boot())
+		gd->flags |= GD_FLG_SILENT;
+
+	return 0;
+}
+#endif	/* CONFIG_FO300 */
+
 int last_stage_init (void)
 {
 	/*
@@ -538,6 +575,13 @@ int last_stage_init (void)
 		__asm__ volatile ("sync");
 	}
 
+#ifdef CONFIG_FO300
+	if (silent_boot()) {
+		setenv("bootdelay", "0");
+		disable_ctrlc(1);
+	}
+#endif
+
 	return 0;
 }
 
@@ -729,33 +773,3 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
-
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-#ifdef CONFIG_FO300
-int board_early_init_f (void)
-{
-	vu_long timer3_status;
-	DECLARE_GLOBAL_DATA_PTR;
-
-	/* Configure GPT3 as GPIO input */
-	*(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
-
-	/* Read in TIMER_3 pin status */
-	timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
-
-#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
-	/* Force silent console mode if S1 switch
-	 * is in closed position (TIMER_3 pin status is LOW). */
-	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
-#else
-	/* Force silent console mode if S1 switch
-	 * is in open position (TIMER_3 pin status is HIGH). */
-	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
-#endif
-		gd->flags |= GD_FLG_SILENT;
-
-	return 0;
-}
-#endif	/* CONFIG_FO300 */
-#endif	/* CONFIG_BOARD_EARLY_INIT_F */