keystone2: keystone_nav: don't use hard addresses in qm_config

Use definitions in qm_config. The definitions can be set specifically
for SoC, so there is no reason to check SoC type while initialization.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>

2 files changed, 30 insertions, 32 deletions

diff --git a/arch/arm/cpu/armv7/keystone/keystone_nav.c b/arch/arm/cpu/armv7/keystone/keystone_nav.c
index 39d6f995f7b..5219f84bfb8 100644
--- a/arch/arm/cpu/armv7/keystone/keystone_nav.c
+++ b/arch/arm/cpu/armv7/keystone/keystone_nav.c
@@ -15,21 +15,21 @@ static int soc_type =
 	k2hk;
 #endif
 
-struct qm_config k2hk_qm_memmap = {
-	.stat_cfg	= 0x02a40000,
-	.queue		= (struct qm_reg_queue *)0x02a80000,
-	.mngr_vbusm	= 0x23a80000,
-	.i_lram		= 0x00100000,
-	.proxy		= (struct qm_reg_queue *)0x02ac0000,
-	.status_ram	= 0x02a06000,
-	.mngr_cfg	= (struct qm_cfg_reg *)0x02a02000,
-	.intd_cfg	= 0x02a0c000,
-	.desc_mem	= (struct descr_mem_setup_reg *)0x02a03000,
-	.region_num	= 64,
-	.pdsp_cmd	= 0x02a20000,
-	.pdsp_ctl	= 0x02a0f000,
-	.pdsp_iram	= 0x02a10000,
-	.qpool_num	= 4000,
+struct qm_config qm_memmap = {
+	.stat_cfg	= KS2_QM_QUEUE_STATUS_BASE,
+	.queue		= (void *)KS2_QM_MANAGER_QUEUES_BASE,
+	.mngr_vbusm	= KS2_QM_BASE_ADDRESS,
+	.i_lram		= KS2_QM_LINK_RAM_BASE,
+	.proxy		= (void *)KS2_QM_MANAGER_Q_PROXY_BASE,
+	.status_ram	= KS2_QM_STATUS_RAM_BASE,
+	.mngr_cfg	= (void *)KS2_QM_CONF_BASE,
+	.intd_cfg	= KS2_QM_INTD_CONF_BASE,
+	.desc_mem	= (void *)KS2_QM_DESC_SETUP_BASE,
+	.region_num	= KS2_QM_REGION_NUM,
+	.pdsp_cmd	= KS2_QM_PDSP1_CMD_BASE,
+	.pdsp_ctl	= KS2_QM_PDSP1_CTRL_BASE,
+	.pdsp_iram	= KS2_QM_PDSP1_IRAM_BASE,
+	.qpool_num	= KS2_QM_QPOOL_NUM,
 };
 
 /*
@@ -52,12 +52,9 @@ inline int num_of_desc_to_reg(int num_descr)
 	return 15;
 }
 
-static int _qm_init(struct qm_config *cfg)
+int _qm_init(struct qm_config *cfg)
 {
-	u32	j;
-
-	if (cfg == NULL)
-		return QM_ERR;
+	u32 j;
 
 	qm_cfg = cfg;
 
@@ -82,12 +79,7 @@ static int _qm_init(struct qm_config *cfg)
 
 int qm_init(void)
 {
-	switch (soc_type) {
-	case k2hk:
-		return _qm_init(&k2hk_qm_memmap);
-	}
-
-	return QM_ERR;
+	return _qm_init(&qm_memmap);
 }
 
 void qm_close(void)
@@ -294,11 +286,8 @@ static int _netcp_init(struct pktdma_cfg *netcp_cfg,
 	/* Disable loopback in the tx direction */
 	writel(0, &netcp->global->emulation_control);
 
-/* TODO: make it dependend on a soc type variable */
-#ifdef CONFIG_SOC_K2HK
 	/* Set QM base address, only for K2x devices */
-	writel(0x23a80000, &netcp->global->qm_base_addr[0]);
-#endif
+	writel(KS2_QM_BASE_ADDRESS, &netcp->global->qm_base_addr[0]);
 
 	/* Enable all channels. The current state isn't important */
 	for (j = 0; j < netcp->tx_ch_num; j++)  {
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 76e6441e579..ddc4be3b2ff 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -145,11 +145,20 @@ typedef volatile unsigned int   *dv_reg_p;
 #define KS2_EFUSE_BOOTROM		(KS2_DEVICE_STATE_CTRL_BASE + 0xc90)
 
 /* Queue manager */
-#define KS2_QM_MANAGER_BASE		0x02a02000
+#define KS2_QM_BASE_ADDRESS		0x23a80000
+#define KS2_QM_CONF_BASE		0x02a02000
 #define KS2_QM_DESC_SETUP_BASE		0x02a03000
-#define KS2_QM_MANAGER_QUEUES_BASEi	0x02a80000
+#define KS2_QM_STATUS_RAM_BASE		0x02a06000
+#define KS2_QM_INTD_CONF_BASE		0x02a0c000
+#define KS2_QM_PDSP1_CMD_BASE		0x02a20000
+#define KS2_QM_PDSP1_CTRL_BASE		0x02a0f000
+#define KS2_QM_PDSP1_IRAM_BASE		0x02a10000
+#define KS2_QM_MANAGER_QUEUES_BASE	0x02a80000
 #define KS2_QM_MANAGER_Q_PROXY_BASE	0x02ac0000
 #define KS2_QM_QUEUE_STATUS_BASE	0x02a40000
+#define KS2_QM_LINK_RAM_BASE		0x00100000
+#define KS2_QM_REGION_NUM		64
+#define KS2_QM_QPOOL_NUM		4000
 
 /* MSMC control */
 #define KS2_MSMC_CTRL_BASE		0x0bc00000