aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini2020-04-30 18:05:15 -0400
committerTom Rini2020-04-30 18:05:15 -0400
commitb641dd3ec8dc3f6b18d2fa945ac3ab597063d191 (patch)
tree98fe84b2d017589f42da3a410f27c2358fd49ddd
parent78021b63373de32335bd204471d6cb7c7e18bc52 (diff)
parent286bcdb40f11def282117e16401bb85502e426a8 (diff)
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- distro boot support for SPI flash - sifive spi flash driver
Diffstat
-rw-r--r--arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi11
-rw-r--r--board/sifive/fu540/Kconfig3
-rw-r--r--drivers/mtd/nand/spi/Makefile2
-rw-r--r--drivers/mtd/nand/spi/core.c1
-rw-r--r--drivers/mtd/nand/spi/toshiba.c201
-rw-r--r--drivers/mtd/spi/spi-nor-core.c6
-rw-r--r--drivers/mtd/spi/spi-nor-ids.c12
-rw-r--r--drivers/spi/cadence_qspi.c33
-rw-r--r--drivers/spi/fsl_qspi.c1577
-rw-r--r--drivers/spi/fsl_qspi.h145
-rw-r--r--drivers/spi/spi-mem.c2
-rw-r--r--drivers/spi/spi-sifive.c178
-rw-r--r--drivers/watchdog/Kconfig1
-rw-r--r--include/configs/rk3399_common.h3
-rw-r--r--include/configs/rockchip-common.h15
-rw-r--r--include/environment/distro/sf.h41
-rw-r--r--include/linux/mtd/spi-nor.h1
-rw-r--r--include/linux/mtd/spinand.h1
-rw-r--r--include/spi-mem.h2
19 files changed, 1059 insertions, 1176 deletions
diff --git a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
new file mode 100644
index 00000000000..2aebfab6466
--- /dev/null
+++ b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/ {
+ aliases {
+ spi0 = &qspi0;
+ spi2 = &qspi2;
+ };
+};
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig
index 5ca21474dee..75661f35f8a 100644
--- a/board/sifive/fu540/Kconfig
+++ b/board/sifive/fu540/Kconfig
@@ -26,6 +26,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
imply CMD_FS_GENERIC
imply CMD_NET
imply CMD_PING
+ imply CMD_SF
imply CLK_SIFIVE
imply CLK_SIFIVE_FU540_PRCI
imply DOS_PARTITION
@@ -40,6 +41,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
imply SIFIVE_SERIAL
imply SPI
imply SPI_SIFIVE
+ imply SPI_FLASH
+ imply SPI_FLASH_ISSI
imply MMC
imply MMC_SPI
imply MMC_BROKEN_CD
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index dd6bacae34d..6c65b187e86 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o winbond.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index cd624ec6ae6..397dfa41789 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -835,6 +835,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
&gigadevice_spinand_manufacturer,
&macronix_spinand_manufacturer,
&micron_spinand_manufacturer,
+ &toshiba_spinand_manufacturer,
&winbond_spinand_manufacturer,
};
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
new file mode 100644
index 00000000000..77c25398fcc
--- /dev/null
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 exceet electronics GmbH
+ * Copyright (c) 2018 Kontron Electronics GmbH
+ *
+ * Author: Frieder Schrempf <frieder.schrempf@kontron.de>
+ */
+
+#ifndef __UBOOT__
+#include <malloc.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_TOSHIBA 0x98
+#define TOSH_STATUS_ECC_HAS_BITFLIPS_T (3 << 4)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 0)
+ return -ERANGE;
+
+ region->offset = mtd->oobsize / 2;
+ region->length = mtd->oobsize / 2;
+
+ return 0;
+}
+
+static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 0)
+ return -ERANGE;
+
+ /* 2 bytes reserved for BBM */
+ region->offset = 2;
+ region->length = (mtd->oobsize / 2) - 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops tc58cxgxsx_ooblayout = {
+ .ecc = tc58cxgxsx_ooblayout_ecc,
+ .rfree = tc58cxgxsx_ooblayout_free,
+};
+
+static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ u8 mbf = 0;
+ struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
+
+ switch (status & STATUS_ECC_MASK) {
+ case STATUS_ECC_NO_BITFLIPS:
+ return 0;
+
+ case STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+
+ case STATUS_ECC_HAS_BITFLIPS:
+ case TOSH_STATUS_ECC_HAS_BITFLIPS_T:
+ /*
+ * Let's try to retrieve the real maximum number of bitflips
+ * in order to avoid forcing the wear-leveling layer to move
+ * data around if it's not necessary.
+ */
+ if (spi_mem_exec_op(spinand->slave, &op))
+ return nand->eccreq.strength;
+
+ mbf >>= 4;
+
+ if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
+ return nand->eccreq.strength;
+
+ return mbf;
+
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct spinand_info toshiba_spinand_table[] = {
+ /* 3.3V 1Gb */
+ SPINAND_INFO("TC58CVG0S3", 0xC2,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 3.3V 2Gb */
+ SPINAND_INFO("TC58CVG1S3", 0xCB,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 3.3V 4Gb */
+ SPINAND_INFO("TC58CVG2S0", 0xCD,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 3.3V 4Gb */
+ SPINAND_INFO("TC58CVG2S0", 0xED,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 1.8V 1Gb */
+ SPINAND_INFO("TC58CYG0S3", 0xB2,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 1.8V 2Gb */
+ SPINAND_INFO("TC58CYG1S3", 0xBB,
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+ /* 1.8V 4Gb */
+ SPINAND_INFO("TC58CYG2S0", 0xBD,
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+ tc58cxgxsx_ecc_get_status)),
+};
+
+static int toshiba_spinand_detect(struct spinand_device *spinand)
+{
+ u8 *id = spinand->id.data;
+ int ret;
+
+ /*
+ * Toshiba SPI NAND read ID needs a dummy byte,
+ * so the first byte in id is garbage.
+ */
+ if (id[1] != SPINAND_MFR_TOSHIBA)
+ return 0;
+
+ ret = spinand_match_and_init(spinand, toshiba_spinand_table,
+ ARRAY_SIZE(toshiba_spinand_table),
+ id[2]);
+ if (ret)
+ return ret;
+
+ return 1;
+}
+
+static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = {
+ .detect = toshiba_spinand_detect,
+};
+
+const struct spinand_manufacturer toshiba_spinand_manufacturer = {
+ .id = SPINAND_MFR_TOSHIBA,
+ .name = "Toshiba",
+ .ops = &toshiba_spinand_manuf_ops,
+};
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 7b6ad495ace..e840c60f275 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -325,6 +325,7 @@ static int set_4byte(struct spi_nor *nor, const struct flash_info *info,
case SNOR_MFR_MICRON:
/* Some Micron need WREN command; all will accept it */
need_wren = true;
+ case SNOR_MFR_ISSI:
case SNOR_MFR_MACRONIX:
case SNOR_MFR_WINBOND:
if (need_wren)
@@ -1246,11 +1247,8 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
* If page_size is a power of two, the offset can be quickly
* calculated with an AND operation. On the other cases we
* need to do a modulus operation (more expensive).
- * Power of two numbers have only one bit set and we can use
- * the instruction hweight32 to detect if we need to do a
- * modulus (do_div()) or not.
*/
- if (hweight32(nor->page_size) == 1) {
+ if (is_power_of_2(nor->page_size)) {
page_offset = addr & (nor->page_size - 1);
} else {
u64 aux = addr;
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index abdf560e020..e5e71029231 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -135,7 +135,8 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("is25wp128", 0x9d7018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("is25wp256", 0x9d7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
/* Macronix */
@@ -183,8 +184,8 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
- { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_4B_OPCODES) },
- { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_4B_OPCODES) },
+ { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
+ { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
/* Spansion/Cypress -- single (large) sector size only, at least
@@ -192,9 +193,10 @@ const struct flash_info spi_nor_ids[] = {
*/
{ INFO("s25sl032p", 0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("s25sl064p", 0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { INFO("s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+ { INFO("s25fl256s0", 0x010219, 0x4d00, 256 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl256s1", 0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { INFO6("s25fl512s", 0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
+ { INFO6("s25fl512s", 0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
+ { INFO6("s25fs512s", 0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl512s_256k", 0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl512s_64k", 0x010220, 0x4d01, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ INFO("s25fl512s_512k", 0x010220, 0x4f00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 83b114ffe74..994a5948f1e 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -166,11 +166,28 @@ static int cadence_spi_probe(struct udevice *bus)
{
struct cadence_spi_platdata *plat = bus->platdata;
struct cadence_spi_priv *priv = dev_get_priv(bus);
+ struct clk clk;
int ret;
priv->regbase = plat->regbase;
priv->ahbbase = plat->ahbbase;
+ if (plat->ref_clk_hz == 0) {
+ ret = clk_get_by_index(bus, 0, &clk);
+ if (ret) {
+#ifdef CONFIG_CQSPI_REF_CLK
+ plat->ref_clk_hz = CONFIG_CQSPI_REF_CLK;
+#else
+ return ret;
+#endif
+ } else {
+ plat->ref_clk_hz = clk_get_rate(&clk);
+ clk_free(&clk);
+ if (IS_ERR_VALUE(plat->ref_clk_hz))
+ return plat->ref_clk_hz;
+ }
+ }
+
ret = reset_get_bulk(bus, &priv->resets);
if (ret)
dev_warn(bus, "Can't get reset: %d\n", ret);
@@ -268,8 +285,6 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
{
struct cadence_spi_platdata *plat = bus->platdata;
ofnode subnode;
- struct clk clk;
- int ret;
plat->regbase = (void *)devfdt_get_addr_index(bus, 0);
plat->ahbbase = (void *)devfdt_get_addr_size_index(bus, 1,
@@ -305,20 +320,6 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
plat->tchsh_ns = ofnode_read_u32_default(subnode, "cdns,tchsh-ns", 20);
plat->tslch_ns = ofnode_read_u32_default(subnode, "cdns,tslch-ns", 20);
- ret = clk_get_by_index(bus, 0, &clk);
- if (ret) {
-#ifdef CONFIG_CQSPI_REF_CLK
- plat->ref_clk_hz = CONFIG_CQSPI_REF_CLK;
-#else
- return ret;
-#endif
- } else {
- plat->ref_clk_hz = clk_get_rate(&clk);
- clk_free(&clk);
- if (IS_ERR_VALUE(plat->ref_clk_hz))
- return plat->ref_clk_hz;
- }
-
debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
__func__, plat->regbase, plat->ahbbase, plat->max_hz,
plat->page_size);
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index 8e2a09df366..ee2c8b67dc9 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -1,1142 +1,781 @@
// SPDX-License-Identifier: GPL-2.0+
+
/*
- * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Freescale QuadSPI driver.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2018 Bootlin
+ * Copyright (C) 2018 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright 2019-2020 NXP
+ *
+ * This driver is a ported version of Linux Freescale QSPI driver taken from
+ * v5.5-rc1 tag having following information.
*
- * Freescale Quad Serial Peripheral Interface (QSPI) driver
+ * Transition to SPI MEM interface:
+ * Authors:
+ * Boris Brezillon <bbrezillon@kernel.org>
+ * Frieder Schrempf <frieder.schrempf@kontron.de>
+ * Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
+ * Suresh Gupta <suresh.gupta@nxp.com>
+ *
+ * Based on the original fsl-quadspi.c spi-nor driver.
+ * Transition to spi-mem in spi-fsl-qspi.c
*/
#include <common.h>
-#include <malloc.h>
-#include <spi.h>
#include <asm/io.h>
-#include <linux/sizes.h>
-#include <linux/iopoll.h>
#include <dm.h>
-#include <errno.h>
-#include <watchdog.h>
-#include <wait_bit.h>
-#include "fsl_qspi.h"
+#include <linux/iopoll.h>
+#include <linux/sizes.h>
+#include <linux/err.h>
+#include <spi.h>
+#include <spi-mem.h>
DECLARE_GLOBAL_DATA_PTR;
-#define OFFSET_BITS_MASK GENMASK(23, 0)
-
-#define FLASH_STATUS_WEL 0x02
-
-/* SEQID */
-#define SEQID_WREN 1
-#define SEQID_FAST_READ 2
-#define SEQID_RDSR 3
-#define SEQID_SE 4
-#define SEQID_CHIP_ERASE 5
-#define SEQID_PP 6
-#define SEQID_RDID 7
-#define SEQID_BE_4K 8
-#ifdef CONFIG_SPI_FLASH_BAR
-#define SEQID_BRRD 9
-#define SEQID_BRWR 10
-#define SEQID_RDEAR 11
-#define SEQID_WREAR 12
-#endif
-#define SEQID_WRAR 13
-#define SEQID_RDAR 14
-
-/* QSPI CMD */
-#define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */
-#define QSPI_CMD_RDSR 0x05 /* Read status register */
-#define QSPI_CMD_WREN 0x06 /* Write enable */
-#define QSPI_CMD_FAST_READ 0x0b /* Read data bytes (high frequency) */
-#define QSPI_CMD_BE_4K 0x20 /* 4K erase */
-#define QSPI_CMD_CHIP_ERASE 0xc7 /* Erase whole flash chip */
-#define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */
-#define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */
-
-/* Used for Micron, winbond and Macronix flashes */
-#define QSPI_CMD_WREAR 0xc5 /* EAR register write */
-#define QSPI_CMD_RDEAR 0xc8 /* EAR reigster read */
-
-/* Used for Spansion flashes only. */
-#define QSPI_CMD_BRRD 0x16 /* Bank register read */
-#define QSPI_CMD_BRWR 0x17 /* Bank register write */
-
-/* Used for Spansion S25FS-S family flash only. */
-#define QSPI_CMD_RDAR 0x65 /* Read any device register */
-#define QSPI_CMD_WRAR 0x71 /* Write any device register */
-
-/* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */
-#define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */
-#define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */
-#define QSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */
-
-/* fsl_qspi_platdata flags */
-#define QSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
-
-/* default SCK frequency, unit: HZ */
-#define FSL_QSPI_DEFAULT_SCK_FREQ 50000000
-
-/* QSPI max chipselect signals number */
-#define FSL_QSPI_MAX_CHIPSELECT_NUM 4
-
-/* Controller needs driver to swap endian */
+/*
+ * The driver only uses one single LUT entry, that is updated on
+ * each call of exec_op(). Index 0 is preset at boot with a basic
+ * read operation, so let's use the last entry (15).
+ */
+#define SEQID_LUT 15
+
+/* Registers used by the driver */
+#define QUADSPI_MCR 0x00
+#define QUADSPI_MCR_RESERVED_MASK GENMASK(19, 16)
+#define QUADSPI_MCR_MDIS_MASK BIT(14)
+#define QUADSPI_MCR_CLR_TXF_MASK BIT(11)
+#define QUADSPI_MCR_CLR_RXF_MASK BIT(10)
+#define QUADSPI_MCR_DDR_EN_MASK BIT(7)
+#define QUADSPI_MCR_END_CFG_MASK GENMASK(3, 2)
+#define QUADSPI_MCR_SWRSTHD_MASK BIT(1)
+#define QUADSPI_MCR_SWRSTSD_MASK BIT(0)
+
+#define QUADSPI_IPCR 0x08
+#define QUADSPI_IPCR_SEQID(x) ((x) << 24)
+#define QUADSPI_FLSHCR 0x0c
+#define QUADSPI_FLSHCR_TCSS_MASK GENMASK(3, 0)
+#define QUADSPI_FLSHCR_TCSH_MASK GENMASK(11, 8)
+#define QUADSPI_FLSHCR_TDH_MASK GENMASK(17, 16)
+
+#define QUADSPI_BUF3CR 0x1c
+#define QUADSPI_BUF3CR_ALLMST_MASK BIT(31)
+#define QUADSPI_BUF3CR_ADATSZ(x) ((x) << 8)
+#define QUADSPI_BUF3CR_ADATSZ_MASK GENMASK(15, 8)
+
+#define QUADSPI_BFGENCR 0x20
+#define QUADSPI_BFGENCR_SEQID(x) ((x) << 12)
+
+#define QUADSPI_BUF0IND 0x30
+#define QUADSPI_BUF1IND 0x34
+#define QUADSPI_BUF2IND 0x38
+#define QUADSPI_SFAR 0x100
+
+#define QUADSPI_SMPR 0x108
+#define QUADSPI_SMPR_DDRSMP_MASK GENMASK(18, 16)
+#define QUADSPI_SMPR_FSDLY_MASK BIT(6)
+#define QUADSPI_SMPR_FSPHS_MASK BIT(5)
+#define QUADSPI_SMPR_HSENA_MASK BIT(0)
+
+#define QUADSPI_RBCT 0x110
+#define QUADSPI_RBCT_WMRK_MASK GENMASK(4, 0)
+#define QUADSPI_RBCT_RXBRD_USEIPS BIT(8)
+
+#define QUADSPI_TBDR 0x154
+
+#define QUADSPI_SR 0x15c
+#define QUADSPI_SR_IP_ACC_MASK BIT(1)
+#define QUADSPI_SR_AHB_ACC_MASK BIT(2)
+
+#define QUADSPI_FR 0x160
+#define QUADSPI_FR_TFF_MASK BIT(0)
+
+#define QUADSPI_RSER 0x164
+#define QUADSPI_RSER_TFIE BIT(0)
+
+#define QUADSPI_SPTRCLR 0x16c
+#define QUADSPI_SPTRCLR_IPPTRC BIT(8)
+#define QUADSPI_SPTRCLR_BFPTRC BIT(0)
+
+#define QUADSPI_SFA1AD 0x180
+#define QUADSPI_SFA2AD 0x184
+#define QUADSPI_SFB1AD 0x188
+#define QUADSPI_SFB2AD 0x18c
+#define QUADSPI_RBDR(x) (0x200 + ((x) * 4))
+
+#define QUADSPI_LUTKEY 0x300
+#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0
+
+#define QUADSPI_LCKCR 0x304
+#define QUADSPI_LCKER_LOCK BIT(0)
+#define QUADSPI_LCKER_UNLOCK BIT(1)
+
+#define QUADSPI_LUT_BASE 0x310
+#define QUADSPI_LUT_OFFSET (SEQID_LUT * 4 * 4)
+#define QUADSPI_LUT_REG(idx) \
+ (QUADSPI_LUT_BASE + QUADSPI_LUT_OFFSET + (idx) * 4)
+
+/* Instruction set for the LUT register */
+#define LUT_STOP 0
+#define LUT_CMD 1
+#define LUT_ADDR 2
+#define LUT_DUMMY 3
+#define LUT_MODE 4
+#define LUT_MODE2 5
+#define LUT_MODE4 6
+#define LUT_FSL_READ 7
+#define LUT_FSL_WRITE 8
+#define LUT_JMP_ON_CS 9
+#define LUT_ADDR_DDR 10
+#define LUT_MODE_DDR 11
+#define LUT_MODE2_DDR 12
+#define LUT_MODE4_DDR 13
+#define LUT_FSL_READ_DDR 14
+#define LUT_FSL_WRITE_DDR 15
+#define LUT_DATA_LEARN 16
+
+/*
+ * The PAD definitions for LUT register.
+ *
+ * The pad stands for the number of IO lines [0:3].
+ * For example, the quad read needs four IO lines,
+ * so you should use LUT_PAD(4).
+ */
+#define LUT_PAD(x) (fls(x) - 1)
+
+/*
+ * Macro for constructing the LUT entries with the following
+ * register layout:
+ *
+ * ---------------------------------------------------
+ * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
+ * ---------------------------------------------------
+ */
+#define LUT_DEF(idx, ins, pad, opr) \
+ ((((ins) << 10) | ((pad) << 8) | (opr)) << (((idx) % 2) * 16))
+
+/* Controller needs driver to swap endianness */
#define QUADSPI_QUIRK_SWAP_ENDIAN BIT(0)
-enum fsl_qspi_devtype {
- FSL_QUADSPI_VYBRID,
- FSL_QUADSPI_IMX6SX,
- FSL_QUADSPI_IMX6UL_7D,
- FSL_QUADSPI_IMX7ULP,
-};
+/* Controller needs 4x internal clock */
+#define QUADSPI_QUIRK_4X_INT_CLK BIT(1)
-struct fsl_qspi_devtype_data {
- enum fsl_qspi_devtype devtype;
- u32 rxfifo;
- u32 txfifo;
- u32 ahb_buf_size;
- u32 driver_data;
-};
+/*
+ * TKT253890, the controller needs the driver to fill the txfifo with
+ * 16 bytes at least to trigger a data transfer, even though the extra
+ * data won't be transferred.
+ */
+#define QUADSPI_QUIRK_TKT253890 BIT(2)
-/**
- * struct fsl_qspi_platdata - platform data for Freescale QSPI
- *
- * @flags: Flags for QSPI QSPI_FLAG_...
- * @speed_hz: Default SCK frequency
- * @reg_base: Base address of QSPI registers
- * @amba_base: Base address of QSPI memory mapping
- * @amba_total_size: size of QSPI memory mapping
- * @flash_num: Number of active slave devices
- * @num_chipselect: Number of QSPI chipselect signals
+/* TKT245618, the controller cannot wake up from wait mode */
+#define QUADSPI_QUIRK_TKT245618 BIT(3)
+
+/*
+ * Controller adds QSPI_AMBA_BASE (base address of the mapped memory)
+ * internally. No need to add it when setting SFXXAD and SFAR registers
*/
-struct fsl_qspi_platdata {
- u32 flags;
- u32 speed_hz;
- fdt_addr_t reg_base;
- fdt_addr_t amba_base;
- fdt_size_t amba_total_size;
- u32 flash_num;
- u32 num_chipselect;
-};
+#define QUADSPI_QUIRK_BASE_INTERNAL BIT(4)
-/**
- * struct fsl_qspi_priv - private data for Freescale QSPI
- *
- * @flags: Flags for QSPI QSPI_FLAG_...
- * @bus_clk: QSPI input clk frequency
- * @speed_hz: Default SCK frequency
- * @cur_seqid: current LUT table sequence id
- * @sf_addr: flash access offset
- * @amba_base: Base address of QSPI memory mapping of every CS
- * @amba_total_size: size of QSPI memory mapping
- * @cur_amba_base: Base address of QSPI memory mapping of current CS
- * @flash_num: Number of active slave devices
- * @num_chipselect: Number of QSPI chipselect signals
- * @regs: Point to QSPI register structure for I/O access
+/*
+ * Controller uses TDH bits in register QUADSPI_FLSHCR.
+ * They need to be set in accordance with the DDR/SDR mode.
*/
-struct fsl_qspi_priv {
- u32 flags;
- u32 bus_clk;
- u32 speed_hz;
- u32 cur_seqid;
- u32 sf_addr;
- u32 amba_base[FSL_QSPI_MAX_CHIPSELECT_NUM];
- u32 amba_total_size;
- u32 cur_amba_base;
- u32 flash_num;
- u32 num_chipselect;
- struct fsl_qspi_regs *regs;
- struct fsl_qspi_devtype_data *devtype_data;
+#define QUADSPI_QUIRK_USE_TDH_SETTING BIT(5)
+
+struct fsl_qspi_devtype_data {
+ unsigned int rxfifo;
+ unsigned int txfifo;
+ unsigned int ahb_buf_size;
+ unsigned int quirks;
+ bool little_endian;
};
static const struct fsl_qspi_devtype_data vybrid_data = {
- .devtype = FSL_QUADSPI_VYBRID,
- .rxfifo = 128,
- .txfifo = 64,
- .ahb_buf_size = 1024,
- .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN,
+ .rxfifo = SZ_128,
+ .txfifo = SZ_64,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_SWAP_ENDIAN,
+ .little_endian = true,
};
static const struct fsl_qspi_devtype_data imx6sx_data = {
- .devtype = FSL_QUADSPI_IMX6SX,
- .rxfifo = 128,
- .txfifo = 512,
- .ahb_buf_size = 1024,
- .driver_data = 0,
+ .rxfifo = SZ_128,
+ .txfifo = SZ_512,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618,
+ .little_endian = true,
+};
+
+static const struct fsl_qspi_devtype_data imx7d_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_512,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
+ QUADSPI_QUIRK_USE_TDH_SETTING,
+ .little_endian = true,
};
-static const struct fsl_qspi_devtype_data imx6ul_7d_data = {
- .devtype = FSL_QUADSPI_IMX6UL_7D,
- .rxfifo = 128,
- .txfifo = 512,
- .ahb_buf_size = 1024,
- .driver_data = 0,
+static const struct fsl_qspi_devtype_data imx6ul_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_512,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK |
+ QUADSPI_QUIRK_USE_TDH_SETTING,
+ .little_endian = true,
};
-static const struct fsl_qspi_devtype_data imx7ulp_data = {
- .devtype = FSL_QUADSPI_IMX7ULP,
- .rxfifo = 64,
- .txfifo = 64,
- .ahb_buf_size = 128,
- .driver_data = 0,
+static const struct fsl_qspi_devtype_data ls1021a_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_64,
+ .ahb_buf_size = SZ_1K,
+ .quirks = 0,
+ .little_endian = false,
};
-static u32 qspi_read32(u32 flags, u32 *addr)
+static const struct fsl_qspi_devtype_data ls1088a_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_128,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_TKT253890,
+ .little_endian = true,
+};
+
+static const struct fsl_qspi_devtype_data ls2080a_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_64,
+ .ahb_buf_size = SZ_1K,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_BASE_INTERNAL,
+ .little_endian = true,
+};
+
+struct fsl_qspi {
+ struct udevice *dev;
+ void __iomem *iobase;
+ void __iomem *ahb_addr;
+ u32 memmap_phy;
+ const struct fsl_qspi_devtype_data *devtype_data;
+ int selected;
+};
+
+static inline int needs_swap_endian(struct fsl_qspi *q)
{
- return flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ?
- in_be32(addr) : in_le32(addr);
+ return q->devtype_data->quirks & QUADSPI_QUIRK_SWAP_ENDIAN;
}
-static void qspi_write32(u32 flags, u32 *addr, u32 val)
+static inline int needs_4x_clock(struct fsl_qspi *q)
{
- flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ?
- out_be32(addr, val) : out_le32(addr, val);
+ return q->devtype_data->quirks & QUADSPI_QUIRK_4X_INT_CLK;
}
-static inline int is_controller_busy(const struct fsl_qspi_priv *priv)
+static inline int needs_fill_txfifo(struct fsl_qspi *q)
{
- u32 val;
- u32 mask = QSPI_SR_BUSY_MASK | QSPI_SR_AHB_ACC_MASK |
- QSPI_SR_IP_ACC_MASK;
-
- if (priv->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG)
- mask = (u32)cpu_to_be32(mask);
-
- return readl_poll_timeout(&priv->regs->sr, val, !(val & mask), 1000);
+ return q->devtype_data->quirks & QUADSPI_QUIRK_TKT253890;
}
-/* QSPI support swapping the flash read/write data
- * in hardware for LS102xA, but not for VF610 */
-static inline u32 qspi_endian_xchg(struct fsl_qspi_priv *priv, u32 data)
+static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
{
- if (priv->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN)
- return swab32(data);
- else
- return data;
+ return q->devtype_data->quirks & QUADSPI_QUIRK_TKT245618;
}
-static void qspi_set_lut(struct fsl_qspi_priv *priv)
+static inline int needs_amba_base_offset(struct fsl_qspi *q)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 lut_base;
-
- /* Unlock the LUT */
- qspi_write32(priv->flags, &regs->lutkey, LUT_KEY_VALUE);
- qspi_write32(priv->flags, &regs->lckcr, QSPI_LCKCR_UNLOCK);
-
- /* Write Enable */
- lut_base = SEQID_WREN * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_WREN) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* Fast Read */
- lut_base = SEQID_FAST_READ * 4;
-#ifdef CONFIG_SPI_FLASH_BAR
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#else
- if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- else
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_FAST_READ_4B) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) |
- OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) |
- INSTR1(LUT_ADDR));
-#endif
- qspi_write32(priv->flags, &regs->lut[lut_base + 1],
- OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
- OPRND1(priv->devtype_data->rxfifo) | PAD1(LUT_PAD1) |
- INSTR1(LUT_READ));
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* Read Status */
- lut_base = SEQID_RDSR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_RDSR) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
- PAD1(LUT_PAD1) | INSTR1(LUT_READ));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* Erase a sector */
- lut_base = SEQID_SE * 4;
-#ifdef CONFIG_SPI_FLASH_BAR
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_SE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#else
- if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_SE) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- else
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_SE_4B) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#endif
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* Erase the whole chip */
- lut_base = SEQID_CHIP_ERASE * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_CHIP_ERASE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* Page Program */
- lut_base = SEQID_PP * 4;
-#ifdef CONFIG_SPI_FLASH_BAR
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_PP) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#else
- if (FSL_QSPI_FLASH_SIZE <= SZ_16M)
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_PP) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- else
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_PP_4B) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-#endif
- /* Use IDATSZ in IPCR to determine the size and here set 0. */
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], OPRND0(0) |
- PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* READ ID */
- lut_base = SEQID_RDID * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_RDID) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(8) |
- PAD1(LUT_PAD1) | INSTR1(LUT_READ));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 2], 0);
- qspi_write32(priv->flags, &regs->lut[lut_base + 3], 0);
-
- /* SUB SECTOR 4K ERASE */
- lut_base = SEQID_BE_4K * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
-
-#ifdef CONFIG_SPI_FLASH_BAR
- /*
- * BRRD BRWR RDEAR WREAR are all supported, because it is hard to
- * dynamically check whether to set BRRD BRWR or RDEAR WREAR during
- * initialization.
- */
- lut_base = SEQID_BRRD * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_BRRD) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
- PAD1(LUT_PAD1) | INSTR1(LUT_READ));
-
- lut_base = SEQID_BRWR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_BRWR) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
- PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
-
- lut_base = SEQID_RDEAR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_RDEAR) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
- PAD1(LUT_PAD1) | INSTR1(LUT_READ));
-
- lut_base = SEQID_WREAR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base], OPRND0(QSPI_CMD_WREAR) |
- PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) |
- PAD1(LUT_PAD1) | INSTR1(LUT_WRITE));
-#endif
-
- /*
- * Read any device register.
- * Used for Spansion S25FS-S family flash only.
- */
- lut_base = SEQID_RDAR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_RDAR) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1],
- OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
- OPRND1(1) | PAD1(LUT_PAD1) |
- INSTR1(LUT_READ));
+ return !(q->devtype_data->quirks & QUADSPI_QUIRK_BASE_INTERNAL);
+}
- /*
- * Write any device register.
- * Used for Spansion S25FS-S family flash only.
- */
- lut_base = SEQID_WRAR * 4;
- qspi_write32(priv->flags, &regs->lut[lut_base],
- OPRND0(QSPI_CMD_WRAR) | PAD0(LUT_PAD1) |
- INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) |
- PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
- qspi_write32(priv->flags, &regs->lut[lut_base + 1],
- OPRND0(1) | PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
-
- /* Lock the LUT */
- qspi_write32(priv->flags, &regs->lutkey, LUT_KEY_VALUE);
- qspi_write32(priv->flags, &regs->lckcr, QSPI_LCKCR_LOCK);
+static inline int needs_tdh_setting(struct fsl_qspi *q)
+{
+ return q->devtype_data->quirks & QUADSPI_QUIRK_USE_TDH_SETTING;
}
-#if defined(CONFIG_SYS_FSL_QSPI_AHB)
/*
- * If we have changed the content of the flash by writing or erasing,
- * we need to invalidate the AHB buffer. If we do not do so, we may read out
- * the wrong data. The spec tells us reset the AHB domain and Serial Flash
- * domain at the same time.
+ * An IC bug makes it necessary to rearrange the 32-bit data.
+ * Later chips, such as IMX6SLX, have fixed this bug.
*/
-static inline void qspi_ahb_invalid(struct fsl_qspi_priv *priv)
+static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 reg;
-
- reg = qspi_read32(priv->flags, &regs->mcr);
- reg |= QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK;
- qspi_write32(priv->flags, &regs->mcr, reg);
-
- /*
- * The minimum delay : 1 AHB + 2 SFCK clocks.
- * Delay 1 us is enough.
- */
- udelay(1);
-
- reg &= ~(QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK);
- qspi_write32(priv->flags, &regs->mcr, reg);
+ return needs_swap_endian(q) ? __swab32(a) : a;
}
-/* Read out the data from the AHB buffer. */
-static inline void qspi_ahb_read(struct fsl_qspi_priv *priv, u8 *rxbuf, int len)
+/*
+ * R/W functions for big- or little-endian registers:
+ * The QSPI controller's endianness is independent of
+ * the CPU core's endianness. So far, although the CPU
+ * core is little-endian the QSPI controller can use
+ * big-endian or little-endian.
+ */
+static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg;
- void *rx_addr;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
-
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
+ if (q->devtype_data->little_endian)
+ out_le32(addr, val);
+ else
+ out_be32(addr, val);
+}
- rx_addr = (void *)(uintptr_t)(priv->cur_amba_base + priv->sf_addr);
- /* Read out the data directly from the AHB buffer. */
- memcpy(rxbuf, rx_addr, len);
+static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr)
+{
+ if (q->devtype_data->little_endian)
+ return in_le32(addr);
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
+ return in_be32(addr);
}
-static void qspi_enable_ddr_mode(struct fsl_qspi_priv *priv)
+static int fsl_qspi_check_buswidth(struct fsl_qspi *q, u8 width)
{
- u32 reg, reg2;
- struct fsl_qspi_regs *regs = priv->regs;
+ switch (width) {
+ case 1:
+ case 2:
+ case 4:
+ return 0;
+ }
- reg = qspi_read32(priv->flags, &regs->mcr);
- /* Disable the module */
- qspi_write32(priv->flags, &regs->mcr, reg | QSPI_MCR_MDIS_MASK);
-
- /* Set the Sampling Register for DDR */
- reg2 = qspi_read32(priv->flags, &regs->smpr);
- reg2 &= ~QSPI_SMPR_DDRSMP_MASK;
- reg2 |= (2 << QSPI_SMPR_DDRSMP_SHIFT);
- qspi_write32(priv->flags, &regs->smpr, reg2);
-
- /* Enable the module again (enable the DDR too) */
- reg |= QSPI_MCR_DDR_EN_MASK;
- /* Enable bit 29 for imx6sx */
- reg |= BIT(29);
- qspi_write32(priv->flags, &regs->mcr, reg);
-
- /* Enable the TDH to 1 for some platforms like imx6ul, imx7d, etc
- * These two bits are reserved on other platforms
- */
- reg = qspi_read32(priv->flags, &regs->flshcr);
- reg &= ~(BIT(17));
- reg |= BIT(16);
- qspi_write32(priv->flags, &regs->flshcr, reg);
+ return -ENOTSUPP;
}
-/*
- * There are two different ways to read out the data from the flash:
- * the "IP Command Read" and the "AHB Command Read".
- *
- * The IC guy suggests we use the "AHB Command Read" which is faster
- * then the "IP Command Read". (What's more is that there is a bug in
- * the "IP Command Read" in the Vybrid.)
- *
- * After we set up the registers for the "AHB Command Read", we can use
- * the memcpy to read the data directly. A "missed" access to the buffer
- * causes the controller to clear the buffer, and use the sequence pointed
- * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
- */
-static void qspi_init_ahb_read(struct fsl_qspi_priv *priv)
+static bool fsl_qspi_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
{
- struct fsl_qspi_regs *regs = priv->regs;
+ struct fsl_qspi *q = dev_get_priv(slave->dev->parent);
+ int ret;
+
+ ret = fsl_qspi_check_buswidth(q, op->cmd.buswidth);
+
+ if (op->addr.nbytes)
+ ret |= fsl_qspi_check_buswidth(q, op->addr.buswidth);
+
+ if (op->dummy.nbytes)
+ ret |= fsl_qspi_check_buswidth(q, op->dummy.buswidth);
- /* AHB configuration for access buffer 0/1/2 .*/
- qspi_write32(priv->flags, &regs->buf0cr, QSPI_BUFXCR_INVALID_MSTRID);
- qspi_write32(priv->flags, &regs->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
- qspi_write32(priv->flags, &regs->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
- qspi_write32(priv->flags, &regs->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
- ((priv->devtype_data->ahb_buf_size >> 3) << QSPI_BUF3CR_ADATSZ_SHIFT));
+ if (op->data.nbytes)
+ ret |= fsl_qspi_check_buswidth(q, op->data.buswidth);
- /* We only use the buffer3 */
- qspi_write32(priv->flags, &regs->buf0ind, 0);
- qspi_write32(priv->flags, &regs->buf1ind, 0);
- qspi_write32(priv->flags, &regs->buf2ind, 0);
+ if (ret)
+ return false;
/*
- * Set the default lut sequence for AHB Read.
- * Parallel mode is disabled.
+ * The number of instructions needed for the op, needs
+ * to fit into a single LUT entry.
*/
- qspi_write32(priv->flags, &regs->bfgencr,
- SEQID_FAST_READ << QSPI_BFGENCR_SEQID_SHIFT);
-
- /*Enable DDR Mode*/
- qspi_enable_ddr_mode(priv);
+ if (op->addr.nbytes +
+ (op->dummy.nbytes ? 1 : 0) +
+ (op->data.nbytes ? 1 : 0) > 6)
+ return false;
+
+ /* Max 64 dummy clock cycles supported */
+ if (op->dummy.nbytes &&
+ (op->dummy.nbytes * 8 / op->dummy.buswidth > 64))
+ return false;
+
+ /* Max data length, check controller limits and alignment */
+ if (op->data.dir == SPI_MEM_DATA_IN &&
+ (op->data.nbytes > q->devtype_data->ahb_buf_size ||
+ (op->data.nbytes > q->devtype_data->rxfifo - 4 &&
+ !IS_ALIGNED(op->data.nbytes, 8))))
+ return false;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT &&
+ op->data.nbytes > q->devtype_data->txfifo)
+ return false;
+
+ return true;
}
-#endif
-#ifdef CONFIG_SPI_FLASH_BAR
-/* Bank register read/write, EAR register read/write */
-static void qspi_op_rdbank(struct fsl_qspi_priv *priv, u8 *rxbuf, u32 len)
+static void fsl_qspi_prepare_lut(struct fsl_qspi *q,
+ const struct spi_mem_op *op)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 reg, mcr_reg, data, seqid;
+ void __iomem *base = q->iobase;
+ u32 lutval[4] = {};
+ int lutidx = 1, i;
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
+ lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
+ op->cmd.opcode);
- qspi_write32(priv->flags, &regs->sfar, priv->cur_amba_base);
+ /*
+ * For some unknown reason, using LUT_ADDR doesn't work in some
+ * cases (at least with only one byte long addresses), so
+ * let's use LUT_MODE to write the address bytes one by one
+ */
+ for (i = 0; i < op->addr.nbytes; i++) {
+ u8 addrbyte = op->addr.val >> (8 * (op->addr.nbytes - i - 1));
- if (priv->cur_seqid == QSPI_CMD_BRRD)
- seqid = SEQID_BRRD;
- else
- seqid = SEQID_RDEAR;
-
- qspi_write32(priv->flags, &regs->ipcr,
- (seqid << QSPI_IPCR_SEQID_SHIFT) | len);
-
- /* Wait previous command complete */
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- while (1) {
- WATCHDOG_RESET();
-
- reg = qspi_read32(priv->flags, &regs->rbsr);
- if (reg & QSPI_RBSR_RDBFL_MASK) {
- data = qspi_read32(priv->flags, &regs->rbdr[0]);
- data = qspi_endian_xchg(priv, data);
- memcpy(rxbuf, &data, len);
- qspi_write32(priv->flags, &regs->mcr,
- qspi_read32(priv->flags, &regs->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
- break;
- }
+ lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_MODE,
+ LUT_PAD(op->addr.buswidth),
+ addrbyte);
+ lutidx++;
}
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
-}
-#endif
-
-static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
-{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg, rbsr_reg, data, size;
- int i;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
-
- qspi_write32(priv->flags, &regs->sfar, priv->cur_amba_base);
-
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_RDID << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- i = 0;
- while ((priv->devtype_data->rxfifo >= len) && (len > 0)) {
- WATCHDOG_RESET();
-
- rbsr_reg = qspi_read32(priv->flags, &regs->rbsr);
- if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
- data = qspi_read32(priv->flags, &regs->rbdr[i]);
- data = qspi_endian_xchg(priv, data);
- size = (len < 4) ? len : 4;
- memcpy(rxbuf, &data, size);
- len -= size;
- rxbuf++;
- i++;
- }
+ if (op->dummy.nbytes) {
+ lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_DUMMY,
+ LUT_PAD(op->dummy.buswidth),
+ op->dummy.nbytes * 8 /
+ op->dummy.buswidth);
+ lutidx++;
}
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
-}
-
-/* If not use AHB read, read data from ip interface */
-static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len)
-{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg, data;
- int i, size;
- u32 to_or_from;
- u32 seqid;
-
- if (priv->cur_seqid == QSPI_CMD_RDAR)
- seqid = SEQID_RDAR;
- else
- seqid = SEQID_FAST_READ;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
-
- to_or_from = priv->sf_addr + priv->cur_amba_base;
-
- while (len > 0) {
- WATCHDOG_RESET();
-
- qspi_write32(priv->flags, &regs->sfar, to_or_from);
-
- size = (len > priv->devtype_data->rxfifo) ?
- priv->devtype_data->rxfifo : len;
-
- qspi_write32(priv->flags, &regs->ipcr,
- (seqid << QSPI_IPCR_SEQID_SHIFT) |
- size);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- to_or_from += size;
- len -= size;
-
- i = 0;
- while ((priv->devtype_data->rxfifo >= size) && (size > 0)) {
- data = qspi_read32(priv->flags, &regs->rbdr[i]);
- data = qspi_endian_xchg(priv, data);
- if (size < 4)
- memcpy(rxbuf, &data, size);
- else
- memcpy(rxbuf, &data, 4);
- rxbuf++;
- size -= 4;
- i++;
- }
- qspi_write32(priv->flags, &regs->mcr,
- qspi_read32(priv->flags, &regs->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
+ if (op->data.nbytes) {
+ lutval[lutidx / 2] |= LUT_DEF(lutidx,
+ op->data.dir == SPI_MEM_DATA_IN ?
+ LUT_FSL_READ : LUT_FSL_WRITE,
+ LUT_PAD(op->data.buswidth),
+ 0);
+ lutidx++;
}
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
-}
+ lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_STOP, 0, 0);
-static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len)
-{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg, data, reg, status_reg, seqid;
- int i, size, tx_size;
- u32 to_or_from = 0;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
-
- status_reg = 0;
- while ((status_reg & FLASH_STATUS_WEL) != FLASH_STATUS_WEL) {
- WATCHDOG_RESET();
-
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 1);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- reg = qspi_read32(priv->flags, &regs->rbsr);
- if (reg & QSPI_RBSR_RDBFL_MASK) {
- status_reg = qspi_read32(priv->flags, &regs->rbdr[0]);
- status_reg = qspi_endian_xchg(priv, status_reg);
- }
- qspi_write32(priv->flags, &regs->mcr,
- qspi_read32(priv->flags, &regs->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
- }
+ /* unlock LUT */
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+ qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
+
+ dev_dbg(q->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x]\n",
+ op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3]);
- /* Default is page programming */
- seqid = SEQID_PP;
- if (priv->cur_seqid == QSPI_CMD_WRAR)
- seqid = SEQID_WRAR;
-#ifdef CONFIG_SPI_FLASH_BAR
- if (priv->cur_seqid == QSPI_CMD_BRWR)
- seqid = SEQID_BRWR;
- else if (priv->cur_seqid == QSPI_CMD_WREAR)
- seqid = SEQID_WREAR;
-#endif
+ /* fill LUT */
+ for (i = 0; i < ARRAY_SIZE(lutval); i++)
+ qspi_writel(q, lutval[i], base + QUADSPI_LUT_REG(i));
- to_or_from = priv->sf_addr + priv->cur_amba_base;
+ /* lock LUT */
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+ qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
+}
- qspi_write32(priv->flags, &regs->sfar, to_or_from);
+/*
+ * If we have changed the content of the flash by writing or erasing, or if we
+ * read from flash with a different offset into the page buffer, we need to
+ * invalidate the AHB buffer. If we do not do so, we may read out the wrong
+ * data. The spec tells us reset the AHB domain and Serial Flash domain at
+ * the same time.
+ */
+static void fsl_qspi_invalidate(struct fsl_qspi *q)
+{
+ u32 reg;
- tx_size = (len > priv->devtype_data->txfifo) ?
- priv->devtype_data->txfifo : len;
+ reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
+ reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
- size = tx_size / 16;
/*
- * There must be atleast 128bit data
- * available in TX FIFO for any pop operation
+ * The minimum delay : 1 AHB + 2 SFCK clocks.
+ * Delay 1 us is enough.
*/
- if (tx_size % 16)
- size++;
- for (i = 0; i < size * 4; i++) {
- memcpy(&data, txbuf, 4);
- data = qspi_endian_xchg(priv, data);
- qspi_write32(priv->flags, &regs->tbdr, data);
- txbuf += 4;
- }
-
- qspi_write32(priv->flags, &regs->ipcr,
- (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
+ udelay(1);
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
+ reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
}
-static void qspi_op_rdsr(struct fsl_qspi_priv *priv, void *rxbuf, u32 len)
+static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_slave *slave)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg, reg, data;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
-
- qspi_write32(priv->flags, &regs->sfar, priv->cur_amba_base);
-
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- while (1) {
- WATCHDOG_RESET();
-
- reg = qspi_read32(priv->flags, &regs->rbsr);
- if (reg & QSPI_RBSR_RDBFL_MASK) {
- data = qspi_read32(priv->flags, &regs->rbdr[0]);
- data = qspi_endian_xchg(priv, data);
- memcpy(rxbuf, &data, len);
- qspi_write32(priv->flags, &regs->mcr,
- qspi_read32(priv->flags, &regs->mcr) |
- QSPI_MCR_CLR_RXF_MASK);
- break;
- }
- }
+ struct dm_spi_slave_platdata *plat =
+ dev_get_parent_platdata(slave->dev);
+
+ if (q->selected == plat->cs)
+ return;
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
+ q->selected = plat->cs;
+ fsl_qspi_invalidate(q);
}
-static void qspi_op_erase(struct fsl_qspi_priv *priv)
+static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op)
{
- struct fsl_qspi_regs *regs = priv->regs;
- u32 mcr_reg;
- u32 to_or_from = 0;
-
- mcr_reg = qspi_read32(priv->flags, &regs->mcr);
- qspi_write32(priv->flags, &regs->mcr,
- QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- mcr_reg);
- qspi_write32(priv->flags, &regs->rbct, QSPI_RBCT_RXBRD_USEIPS);
-
- to_or_from = priv->sf_addr + priv->cur_amba_base;
- qspi_write32(priv->flags, &regs->sfar, to_or_from);
-
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0);
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- if (priv->cur_seqid == QSPI_CMD_SE) {
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0);
- } else if (priv->cur_seqid == QSPI_CMD_BE_4K) {
- qspi_write32(priv->flags, &regs->ipcr,
- (SEQID_BE_4K << QSPI_IPCR_SEQID_SHIFT) | 0);
- }
- while (qspi_read32(priv->flags, &regs->sr) & QSPI_SR_BUSY_MASK)
- ;
-
- qspi_write32(priv->flags, &regs->mcr, mcr_reg);
+ memcpy_fromio(op->data.buf.in,
+ q->ahb_addr + q->selected * q->devtype_data->ahb_buf_size,
+ op->data.nbytes);
}
-int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+static void fsl_qspi_fill_txfifo(struct fsl_qspi *q,
+ const struct spi_mem_op *op)
{
- u32 bytes = DIV_ROUND_UP(bitlen, 8);
- static u32 wr_sfaddr;
- u32 txbuf;
-
- WATCHDOG_RESET();
-
- if (dout) {
- if (flags & SPI_XFER_BEGIN) {
- priv->cur_seqid = *(u8 *)dout;
- memcpy(&txbuf, dout, 4);
- }
-
- if (flags == SPI_XFER_END) {
- priv->sf_addr = wr_sfaddr;
- qspi_op_write(priv, (u8 *)dout, bytes);
- return 0;
- }
-
- if (priv->cur_seqid == QSPI_CMD_FAST_READ ||
- priv->cur_seqid == QSPI_CMD_RDAR) {
- priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
- } else if ((priv->cur_seqid == QSPI_CMD_SE) ||
- (priv->cur_seqid == QSPI_CMD_BE_4K)) {
- priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK;
- qspi_op_erase(priv);
- } else if (priv->cur_seqid == QSPI_CMD_PP ||
- priv->cur_seqid == QSPI_CMD_WRAR) {
- wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK;
- } else if ((priv->cur_seqid == QSPI_CMD_BRWR) ||
- (priv->cur_seqid == QSPI_CMD_WREAR)) {
-#ifdef CONFIG_SPI_FLASH_BAR
- wr_sfaddr = 0;
-#endif
- }
- }
+ void __iomem *base = q->iobase;
+ int i;
+ u32 val;
- if (din) {
- if (priv->cur_seqid == QSPI_CMD_FAST_READ) {
-#ifdef CONFIG_SYS_FSL_QSPI_AHB
- qspi_ahb_read(priv, din, bytes);
-#else
- qspi_op_read(priv, din, bytes);
-#endif
- } else if (priv->cur_seqid == QSPI_CMD_RDAR) {
- qspi_op_read(priv, din, bytes);
- } else if (priv->cur_seqid == QSPI_CMD_RDID)
- qspi_op_rdid(priv, din, bytes);
- else if (priv->cur_seqid == QSPI_CMD_RDSR)
- qspi_op_rdsr(priv, din, bytes);
-#ifdef CONFIG_SPI_FLASH_BAR
- else if ((priv->cur_seqid == QSPI_CMD_BRRD) ||
- (priv->cur_seqid == QSPI_CMD_RDEAR)) {
- priv->sf_addr = 0;
- qspi_op_rdbank(priv, din, bytes);
- }
-#endif
+ for (i = 0; i < ALIGN_DOWN(op->data.nbytes, 4); i += 4) {
+ memcpy(&val, op->data.buf.out + i, 4);
+ val = fsl_qspi_endian_xchg(q, val);
+ qspi_writel(q, val, base + QUADSPI_TBDR);
}
-#ifdef CONFIG_SYS_FSL_QSPI_AHB
- if ((priv->cur_seqid == QSPI_CMD_SE) ||
- (priv->cur_seqid == QSPI_CMD_PP) ||
- (priv->cur_seqid == QSPI_CMD_BE_4K) ||
- (priv->cur_seqid == QSPI_CMD_WREAR) ||
- (priv->cur_seqid == QSPI_CMD_BRWR))
- qspi_ahb_invalid(priv);
-#endif
+ if (i < op->data.nbytes) {
+ memcpy(&val, op->data.buf.out + i, op->data.nbytes - i);
+ val = fsl_qspi_endian_xchg(q, val);
+ qspi_writel(q, val, base + QUADSPI_TBDR);
+ }
- return 0;
+ if (needs_fill_txfifo(q)) {
+ for (i = op->data.nbytes; i < 16; i += 4)
+ qspi_writel(q, 0, base + QUADSPI_TBDR);
+ }
}
-void qspi_module_disable(struct fsl_qspi_priv *priv, u8 disable)
+static void fsl_qspi_read_rxfifo(struct fsl_qspi *q,
+ const struct spi_mem_op *op)
{
- u32 mcr_val;
+ void __iomem *base = q->iobase;
+ int i;
+ u8 *buf = op->data.buf.in;
+ u32 val;
- mcr_val = qspi_read32(priv->flags, &priv->regs->mcr);
- if (disable)
- mcr_val |= QSPI_MCR_MDIS_MASK;
- else
- mcr_val &= ~QSPI_MCR_MDIS_MASK;
- qspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
+ for (i = 0; i < ALIGN_DOWN(op->data.nbytes, 4); i += 4) {
+ val = qspi_readl(q, base + QUADSPI_RBDR(i / 4));
+ val = fsl_qspi_endian_xchg(q, val);
+ memcpy(buf + i, &val, 4);
+ }
+
+ if (i < op->data.nbytes) {
+ val = qspi_readl(q, base + QUADSPI_RBDR(i / 4));
+ val = fsl_qspi_endian_xchg(q, val);
+ memcpy(buf + i, &val, op->data.nbytes - i);
+ }
}
-void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits)
+static int fsl_qspi_readl_poll_tout(struct fsl_qspi *q, void __iomem *base,
+ u32 mask, u32 delay_us, u32 timeout_us)
{
- u32 smpr_val;
+ u32 reg;
- smpr_val = qspi_read32(priv->flags, &priv->regs->smpr);
- smpr_val &= ~clear_bits;
- smpr_val |= set_bits;
- qspi_write32(priv->flags, &priv->regs->smpr, smpr_val);
+ if (!q->devtype_data->little_endian)
+ mask = (u32)cpu_to_be32(mask);
+
+ return readl_poll_timeout(base, reg, !(reg & mask), timeout_us);
}
-static int fsl_qspi_child_pre_probe(struct udevice *dev)
+static int fsl_qspi_do_op(struct fsl_qspi *q, const struct spi_mem_op *op)
{
- struct spi_slave *slave = dev_get_parent_priv(dev);
- struct fsl_qspi_priv *priv = dev_get_priv(dev_get_parent(dev));
+ void __iomem *base = q->iobase;
+ int err = 0;
- slave->max_write_size = priv->devtype_data->txfifo;
+ /*
+ * Always start the sequence at the same index since we update
+ * the LUT at each exec_op() call. And also specify the DATA
+ * length, since it's has not been specified in the LUT.
+ */
+ qspi_writel(q, op->data.nbytes | QUADSPI_IPCR_SEQID(SEQID_LUT),
+ base + QUADSPI_IPCR);
- return 0;
+ /* wait for the controller being ready */
+ err = fsl_qspi_readl_poll_tout(q, base + QUADSPI_SR,
+ (QUADSPI_SR_IP_ACC_MASK |
+ QUADSPI_SR_AHB_ACC_MASK),
+ 10, 1000);
+
+ if (!err && op->data.nbytes && op->data.dir == SPI_MEM_DATA_IN)
+ fsl_qspi_read_rxfifo(q, op);
+
+ return err;
}
-static int fsl_qspi_probe(struct udevice *bus)
+static int fsl_qspi_exec_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
{
- u32 amba_size_per_chip;
- struct fsl_qspi_platdata *plat = dev_get_platdata(bus);
- struct fsl_qspi_priv *priv = dev_get_priv(bus);
- struct dm_spi_bus *dm_spi_bus;
- int i, ret;
+ struct fsl_qspi *q = dev_get_priv(slave->dev->parent);
+ void __iomem *base = q->iobase;
+ u32 addr_offset = 0;
+ int err = 0;
- dm_spi_bus = bus->uclass_priv;
+ /* wait for the controller being ready */
+ fsl_qspi_readl_poll_tout(q, base + QUADSPI_SR, (QUADSPI_SR_IP_ACC_MASK |
+ QUADSPI_SR_AHB_ACC_MASK), 10, 1000);
- dm_spi_bus->max_hz = plat->speed_hz;
+ fsl_qspi_select_mem(q, slave);
- priv->regs = (struct fsl_qspi_regs *)(uintptr_t)plat->reg_base;
- priv->flags = plat->flags;
+ if (needs_amba_base_offset(q))
+ addr_offset = q->memmap_phy;
+
+ qspi_writel(q,
+ q->selected * q->devtype_data->ahb_buf_size + addr_offset,
+ base + QUADSPI_SFAR);
+
+ qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) |
+ QUADSPI_MCR_CLR_RXF_MASK | QUADSPI_MCR_CLR_TXF_MASK,
+ base + QUADSPI_MCR);
+
+ qspi_writel(q, QUADSPI_SPTRCLR_BFPTRC | QUADSPI_SPTRCLR_IPPTRC,
+ base + QUADSPI_SPTRCLR);
+
+ fsl_qspi_prepare_lut(q, op);
- priv->speed_hz = plat->speed_hz;
/*
- * QSPI SFADR width is 32bits, the max dest addr is 4GB-1.
- * AMBA memory zone should be located on the 0~4GB space
- * even on a 64bits cpu.
+ * If we have large chunks of data, we read them through the AHB bus
+ * by accessing the mapped memory. In all other cases we use
+ * IP commands to access the flash.
*/
- priv->amba_base[0] = (u32)plat->amba_base;
- priv->amba_total_size = (u32)plat->amba_total_size;
- priv->flash_num = plat->flash_num;
- priv->num_chipselect = plat->num_chipselect;
-
- priv->devtype_data = (struct fsl_qspi_devtype_data *)dev_get_driver_data(bus);
- if (!priv->devtype_data) {
- printf("ERROR : No devtype_data found\n");
- return -ENODEV;
+ if (op->data.nbytes > (q->devtype_data->rxfifo - 4) &&
+ op->data.dir == SPI_MEM_DATA_IN) {
+ fsl_qspi_read_ahb(q, op);
+ } else {
+ qspi_writel(q, QUADSPI_RBCT_WMRK_MASK |
+ QUADSPI_RBCT_RXBRD_USEIPS, base + QUADSPI_RBCT);
+
+ if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT)
+ fsl_qspi_fill_txfifo(q, op);
+
+ err = fsl_qspi_do_op(q, op);
}
- debug("devtype=%d, txfifo=%d, rxfifo=%d, ahb=%d, data=0x%x\n",
- priv->devtype_data->devtype,
- priv->devtype_data->txfifo,
- priv->devtype_data->rxfifo,
- priv->devtype_data->ahb_buf_size,
- priv->devtype_data->driver_data);
+ /* Invalidate the data in the AHB buffer. */
+ fsl_qspi_invalidate(q);
- /* make sure controller is not busy anywhere */
- ret = is_controller_busy(priv);
+ return err;
+}
- if (ret) {
- debug("ERROR : The controller is busy\n");
- return ret;
+static int fsl_qspi_adjust_op_size(struct spi_slave *slave,
+ struct spi_mem_op *op)
+{
+ struct fsl_qspi *q = dev_get_priv(slave->dev->parent);
+
+ if (op->data.dir == SPI_MEM_DATA_OUT) {
+ if (op->data.nbytes > q->devtype_data->txfifo)
+ op->data.nbytes = q->devtype_data->txfifo;
+ } else {
+ if (op->data.nbytes > q->devtype_data->ahb_buf_size)
+ op->data.nbytes = q->devtype_data->ahb_buf_size;
+ else if (op->data.nbytes > (q->devtype_data->rxfifo - 4))
+ op->data.nbytes = ALIGN_DOWN(op->data.nbytes, 8);
}
- qspi_write32(priv->flags, &priv->regs->mcr,
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK |
- QSPI_MCR_END_CFD_LE);
+ return 0;
+}
+
+static int fsl_qspi_default_setup(struct fsl_qspi *q)
+{
+ void __iomem *base = q->iobase;
+ u32 reg, addr_offset = 0;
+
+ /* Reset the module */
+ qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
+ base + QUADSPI_MCR);
+ udelay(1);
- qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
- QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
+ /* Disable the module */
+ qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
+ base + QUADSPI_MCR);
/*
- * Assign AMBA memory zone for every chipselect
- * QuadSPI has two channels, every channel has two chipselects.
- * If the property 'num-cs' in dts is 2, the AMBA memory will be divided
- * into two parts and assign to every channel. This indicate that every
- * channel only has one valid chipselect.
- * If the property 'num-cs' in dts is 4, the AMBA memory will be divided
- * into four parts and assign to every chipselect.
- * Every channel will has two valid chipselects.
+ * Previous boot stages (BootROM, bootloader) might have used DDR
+ * mode and did not clear the TDH bits. As we currently use SDR mode
+ * only, clear the TDH bits if necessary.
*/
- amba_size_per_chip = priv->amba_total_size >>
- (priv->num_chipselect >> 1);
- for (i = 1 ; i < priv->num_chipselect ; i++)
- priv->amba_base[i] =
- amba_size_per_chip + priv->amba_base[i - 1];
+ if (needs_tdh_setting(q))
+ qspi_writel(q, qspi_readl(q, base + QUADSPI_FLSHCR) &
+ ~QUADSPI_FLSHCR_TDH_MASK,
+ base + QUADSPI_FLSHCR);
+
+ reg = qspi_readl(q, base + QUADSPI_SMPR);
+ qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
+ | QUADSPI_SMPR_FSPHS_MASK
+ | QUADSPI_SMPR_HSENA_MASK
+ | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
+
+ /* We only use the buffer3 for AHB read */
+ qspi_writel(q, 0, base + QUADSPI_BUF0IND);
+ qspi_writel(q, 0, base + QUADSPI_BUF1IND);
+ qspi_writel(q, 0, base + QUADSPI_BUF2IND);
+
+ qspi_writel(q, QUADSPI_BFGENCR_SEQID(SEQID_LUT),
+ q->iobase + QUADSPI_BFGENCR);
+ qspi_writel(q, QUADSPI_RBCT_WMRK_MASK, base + QUADSPI_RBCT);
+ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+ QUADSPI_BUF3CR_ADATSZ(q->devtype_data->ahb_buf_size / 8),
+ base + QUADSPI_BUF3CR);
+
+ if (needs_amba_base_offset(q))
+ addr_offset = q->memmap_phy;
/*
- * Any read access to non-implemented addresses will provide
- * undefined results.
- *
- * In case single die flash devices, TOP_ADDR_MEMA2 and
- * TOP_ADDR_MEMB2 should be initialized/programmed to
- * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
- * setting the size of these devices to 0. This would ensure
- * that the complete memory map is assigned to only one flash device.
+ * In HW there can be a maximum of four chips on two buses with
+ * two chip selects on each bus. We use four chip selects in SW
+ * to differentiate between the four chips.
+ * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD,
+ * SFB2AD accordingly.
*/
- qspi_write32(priv->flags, &priv->regs->sfa1ad,
- priv->amba_base[0] + amba_size_per_chip);
- switch (priv->num_chipselect) {
- case 1:
- break;
- case 2:
- qspi_write32(priv->flags, &priv->regs->sfa2ad,
- priv->amba_base[1]);
- qspi_write32(priv->flags, &priv->regs->sfb1ad,
- priv->amba_base[1] + amba_size_per_chip);
- qspi_write32(priv->flags, &priv->regs->sfb2ad,
- priv->amba_base[1] + amba_size_per_chip);
- break;
- case 4:
- qspi_write32(priv->flags, &priv->regs->sfa2ad,
- priv->amba_base[2]);
- qspi_write32(priv->flags, &priv->regs->sfb1ad,
- priv->amba_base[3]);
- qspi_write32(priv->flags, &priv->regs->sfb2ad,
- priv->amba_base[3] + amba_size_per_chip);
- break;
- default:
- debug("Error: Unsupported chipselect number %u!\n",
- priv->num_chipselect);
- qspi_module_disable(priv, 1);
- return -EINVAL;
- }
-
- qspi_set_lut(priv);
-
-#ifdef CONFIG_SYS_FSL_QSPI_AHB
- qspi_init_ahb_read(priv);
-#endif
-
- qspi_module_disable(priv, 0);
-
+ qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset,
+ base + QUADSPI_SFA1AD);
+ qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset,
+ base + QUADSPI_SFA2AD);
+ qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset,
+ base + QUADSPI_SFB1AD);
+ qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset,
+ base + QUADSPI_SFB2AD);
+
+ q->selected = -1;
+
+ /* Enable the module */
+ qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
+ base + QUADSPI_MCR);
return 0;
}
-static int fsl_qspi_ofdata_to_platdata(struct udevice *bus)
+static const struct spi_controller_mem_ops fsl_qspi_mem_ops = {
+ .adjust_op_size = fsl_qspi_adjust_op_size,
+ .supports_op = fsl_qspi_supports_op,
+ .exec_op = fsl_qspi_exec_op,
+};
+
+static int fsl_qspi_probe(struct udevice *bus)
{
- struct fdt_resource res_regs, res_mem;
- struct fsl_qspi_platdata *plat = bus->platdata;
+ struct dm_spi_bus *dm_bus = bus->uclass_priv;
+ struct fsl_qspi *q = dev_get_priv(bus);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- int ret, flash_num = 0, subnode;
+ struct fdt_resource res;
+ int ret;
- if (fdtdec_get_bool(blob, node, "big-endian"))
- plat->flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG;
+ q->dev = bus;
+ q->devtype_data = (struct fsl_qspi_devtype_data *)
+ dev_get_driver_data(bus);
- ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
- "QuadSPI", &res_regs);
+ /* find the resources */
+ ret = fdt_get_named_resource(blob, node, "reg", "reg-names", "QuadSPI",
+ &res);
if (ret) {
- debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
+ dev_err(bus, "Can't get regs base addresses(ret = %d)!\n", ret);
return -ENOMEM;
}
+
+ q->iobase = map_physmem(res.start, res.end - res.start, MAP_NOCACHE);
+
ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
- "QuadSPI-memory", &res_mem);
+ "QuadSPI-memory", &res);
if (ret) {
- debug("Error: can't get AMBA base addresses(ret = %d)!\n", ret);
+ dev_err(bus, "Can't get AMBA base addresses(ret = %d)!\n", ret);
return -ENOMEM;
}
- /* Count flash numbers */
- fdt_for_each_subnode(subnode, blob, node)
- ++flash_num;
+ q->ahb_addr = map_physmem(res.start, res.end - res.start, MAP_NOCACHE);
+ q->memmap_phy = res.start;
- if (flash_num == 0) {
- debug("Error: Missing flashes!\n");
- return -ENODEV;
- }
+ dm_bus->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
+ 66000000);
- plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
- FSL_QSPI_DEFAULT_SCK_FREQ);
- plat->num_chipselect = fdtdec_get_int(blob, node, "num-cs",
- FSL_QSPI_MAX_CHIPSELECT_NUM);
-
- plat->reg_base = res_regs.start;
- plat->amba_base = res_mem.start;
- plat->amba_total_size = res_mem.end - res_mem.start + 1;
- plat->flash_num = flash_num;
-
- debug("%s: regs=<0x%llx> <0x%llx, 0x%llx>, max-frequency=%d, endianess=%s\n",
- __func__,
- (u64)plat->reg_base,
- (u64)plat->amba_base,
- (u64)plat->amba_total_size,
- plat->speed_hz,
- plat->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le"
- );
+ fsl_qspi_default_setup(q);
return 0;
}
static int fsl_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
+ const void *dout, void *din, unsigned long flags)
{
- struct fsl_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- return qspi_xfer(priv, bitlen, dout, din, flags);
+ return 0;
}
static int fsl_qspi_claim_bus(struct udevice *dev)
{
- struct fsl_qspi_priv *priv;
- struct udevice *bus;
- struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
- int ret;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- /* make sure controller is not busy anywhere */
- ret = is_controller_busy(priv);
-
- if (ret) {
- debug("ERROR : The controller is busy\n");
- return ret;
- }
-
- priv->cur_amba_base = priv->amba_base[slave_plat->cs];
-
- qspi_module_disable(priv, 0);
-
return 0;
}
static int fsl_qspi_release_bus(struct udevice *dev)
{
- struct fsl_qspi_priv *priv;
- struct udevice *bus;
-
- bus = dev->parent;
- priv = dev_get_priv(bus);
-
- qspi_module_disable(priv, 1);
-
return 0;
}
static int fsl_qspi_set_speed(struct udevice *bus, uint speed)
{
- /* Nothing to do */
return 0;
}
static int fsl_qspi_set_mode(struct udevice *bus, uint mode)
{
- /* Nothing to do */
return 0;
}
@@ -1146,14 +785,17 @@ static const struct dm_spi_ops fsl_qspi_ops = {
.xfer = fsl_qspi_xfer,
.set_speed = fsl_qspi_set_speed,
.set_mode = fsl_qspi_set_mode,
+ .mem_ops = &fsl_qspi_mem_ops,
};
static const struct udevice_id fsl_qspi_ids[] = {
- { .compatible = "fsl,vf610-qspi", .data = (ulong)&vybrid_data },
- { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data },
- { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_7d_data },
- { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx6ul_7d_data },
- { .compatible = "fsl,imx7ulp-qspi", .data = (ulong)&imx7ulp_data },
+ { .compatible = "fsl,vf610-qspi", .data = (ulong)&vybrid_data, },
+ { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data, },
+ { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_data, },
+ { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx7d_data, },
+ { .compatible = "fsl,ls1021a-qspi", .data = (ulong)&ls1021a_data, },
+ { .compatible = "fsl,ls1088a-qspi", .data = (ulong)&ls1088a_data, },
+ { .compatible = "fsl,ls2080a-qspi", .data = (ulong)&ls2080a_data, },
{ }
};
@@ -1162,9 +804,6 @@ U_BOOT_DRIVER(fsl_qspi) = {
.id = UCLASS_SPI,
.of_match = fsl_qspi_ids,
.ops = &fsl_qspi_ops,
- .ofdata_to_platdata = fsl_qspi_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct fsl_qspi_platdata),
- .priv_auto_alloc_size = sizeof(struct fsl_qspi_priv),
+ .priv_auto_alloc_size = sizeof(struct fsl_qspi),
.probe = fsl_qspi_probe,
- .child_pre_probe = fsl_qspi_child_pre_probe,
};
diff --git a/drivers/spi/fsl_qspi.h b/drivers/spi/fsl_qspi.h
deleted file mode 100644
index 9e61a852b5a..00000000000
--- a/drivers/spi/fsl_qspi.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * Register definitions for Freescale QSPI
- */
-
-#ifndef _FSL_QSPI_H_
-#define _FSL_QSPI_H_
-
-struct fsl_qspi_regs {
- u32 mcr;
- u32 rsvd0[1];
- u32 ipcr;
- u32 flshcr;
- u32 buf0cr;
- u32 buf1cr;
- u32 buf2cr;
- u32 buf3cr;
- u32 bfgencr;
- u32 soccr;
- u32 rsvd1[2];
- u32 buf0ind;
- u32 buf1ind;
- u32 buf2ind;
- u32 rsvd2[49];
- u32 sfar;
- u32 rsvd3[1];
- u32 smpr;
- u32 rbsr;
- u32 rbct;
- u32 rsvd4[15];
- u32 tbsr;
- u32 tbdr;
- u32 rsvd5[1];
- u32 sr;
- u32 fr;
- u32 rser;
- u32 spndst;
- u32 sptrclr;
- u32 rsvd6[4];
- u32 sfa1ad;
- u32 sfa2ad;
- u32 sfb1ad;
- u32 sfb2ad;
- u32 rsvd7[28];
- u32 rbdr[32];
- u32 rsvd8[32];
- u32 lutkey;
- u32 lckcr;
- u32 rsvd9[2];
- u32 lut[64];
-};
-
-#define QSPI_IPCR_SEQID_SHIFT 24
-#define QSPI_IPCR_SEQID_MASK (0xf << QSPI_IPCR_SEQID_SHIFT)
-
-#define QSPI_MCR_END_CFD_SHIFT 2
-#define QSPI_MCR_END_CFD_MASK (3 << QSPI_MCR_END_CFD_SHIFT)
-#ifdef CONFIG_SYS_FSL_QSPI_AHB
-/* AHB needs 64bit operation */
-#define QSPI_MCR_END_CFD_LE (3 << QSPI_MCR_END_CFD_SHIFT)
-#else
-#define QSPI_MCR_END_CFD_LE (1 << QSPI_MCR_END_CFD_SHIFT)
-#endif
-#define QSPI_MCR_DDR_EN_SHIFT 7
-#define QSPI_MCR_DDR_EN_MASK (1 << QSPI_MCR_DDR_EN_SHIFT)
-#define QSPI_MCR_CLR_RXF_SHIFT 10
-#define QSPI_MCR_CLR_RXF_MASK (1 << QSPI_MCR_CLR_RXF_SHIFT)
-#define QSPI_MCR_CLR_TXF_SHIFT 11
-#define QSPI_MCR_CLR_TXF_MASK (1 << QSPI_MCR_CLR_TXF_SHIFT)
-#define QSPI_MCR_MDIS_SHIFT 14
-#define QSPI_MCR_MDIS_MASK (1 << QSPI_MCR_MDIS_SHIFT)
-#define QSPI_MCR_RESERVED_SHIFT 16
-#define QSPI_MCR_RESERVED_MASK (0xf << QSPI_MCR_RESERVED_SHIFT)
-#define QSPI_MCR_SWRSTHD_SHIFT 1
-#define QSPI_MCR_SWRSTHD_MASK (1 << QSPI_MCR_SWRSTHD_SHIFT)
-#define QSPI_MCR_SWRSTSD_SHIFT 0
-#define QSPI_MCR_SWRSTSD_MASK (1 << QSPI_MCR_SWRSTSD_SHIFT)
-
-#define QSPI_SMPR_HSENA_SHIFT 0
-#define QSPI_SMPR_HSENA_MASK (1 << QSPI_SMPR_HSENA_SHIFT)
-#define QSPI_SMPR_FSPHS_SHIFT 5
-#define QSPI_SMPR_FSPHS_MASK (1 << QSPI_SMPR_FSPHS_SHIFT)
-#define QSPI_SMPR_FSDLY_SHIFT 6
-#define QSPI_SMPR_FSDLY_MASK (1 << QSPI_SMPR_FSDLY_SHIFT)
-#define QSPI_SMPR_DDRSMP_SHIFT 16
-#define QSPI_SMPR_DDRSMP_MASK (7 << QSPI_SMPR_DDRSMP_SHIFT)
-
-#define QSPI_BUFXCR_INVALID_MSTRID 0xe
-#define QSPI_BUF3CR_ALLMST_SHIFT 31
-#define QSPI_BUF3CR_ALLMST_MASK (1 << QSPI_BUF3CR_ALLMST_SHIFT)
-#define QSPI_BUF3CR_ADATSZ_SHIFT 8
-#define QSPI_BUF3CR_ADATSZ_MASK (0xFF << QSPI_BUF3CR_ADATSZ_SHIFT)
-
-#define QSPI_BFGENCR_SEQID_SHIFT 12
-#define QSPI_BFGENCR_SEQID_MASK (0xf << QSPI_BFGENCR_SEQID_SHIFT)
-#define QSPI_BFGENCR_PAR_EN_SHIFT 16
-#define QSPI_BFGENCR_PAR_EN_MASK (1 << QSPI_BFGENCR_PAR_EN_SHIFT)
-
-#define QSPI_RBSR_RDBFL_SHIFT 8
-#define QSPI_RBSR_RDBFL_MASK (0x3f << QSPI_RBSR_RDBFL_SHIFT)
-
-#define QSPI_RBCT_RXBRD_SHIFT 8
-#define QSPI_RBCT_RXBRD_USEIPS (1 << QSPI_RBCT_RXBRD_SHIFT)
-
-#define QSPI_SR_AHB_ACC_SHIFT 2
-#define QSPI_SR_AHB_ACC_MASK (1 << QSPI_SR_AHB_ACC_SHIFT)
-#define QSPI_SR_IP_ACC_SHIFT 1
-#define QSPI_SR_IP_ACC_MASK (1 << QSPI_SR_IP_ACC_SHIFT)
-#define QSPI_SR_BUSY_SHIFT 0
-#define QSPI_SR_BUSY_MASK (1 << QSPI_SR_BUSY_SHIFT)
-
-#define QSPI_LCKCR_LOCK 0x1
-#define QSPI_LCKCR_UNLOCK 0x2
-
-#define LUT_KEY_VALUE 0x5af05af0
-
-#define OPRND0_SHIFT 0
-#define OPRND0(x) ((x) << OPRND0_SHIFT)
-#define PAD0_SHIFT 8
-#define PAD0(x) ((x) << PAD0_SHIFT)
-#define INSTR0_SHIFT 10
-#define INSTR0(x) ((x) << INSTR0_SHIFT)
-#define OPRND1_SHIFT 16
-#define OPRND1(x) ((x) << OPRND1_SHIFT)
-#define PAD1_SHIFT 24
-#define PAD1(x) ((x) << PAD1_SHIFT)
-#define INSTR1_SHIFT 26
-#define INSTR1(x) ((x) << INSTR1_SHIFT)
-
-#define LUT_CMD 1
-#define LUT_ADDR 2
-#define LUT_DUMMY 3
-#define LUT_READ 7
-#define LUT_WRITE 8
-
-#define LUT_PAD1 0
-#define LUT_PAD2 1
-#define LUT_PAD4 2
-
-#define ADDR24BIT 0x18
-#define ADDR32BIT 0x20
-
-#endif /* _FSL_QSPI_H_ */
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index e900c997bd7..ffbe20c5b1e 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -153,7 +153,7 @@ bool spi_mem_default_supports_op(struct spi_slave *slave,
spi_check_buswidth_req(slave, op->dummy.buswidth, true))
return false;
- if (op->data.nbytes &&
+ if (op->data.dir != SPI_MEM_NO_DATA &&
spi_check_buswidth_req(slave, op->data.buswidth,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 969bd4b75cb..4cab0391f7d 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -8,8 +8,10 @@
#include <common.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <malloc.h>
-#include <spi.h>
+#include <spi-mem.h>
+#include <wait_bit.h>
#include <asm/io.h>
#include <linux/log2.h>
#include <clk.h>
@@ -85,6 +87,11 @@
#define SIFIVE_SPI_IP_TXWM BIT(0)
#define SIFIVE_SPI_IP_RXWM BIT(1)
+/* format protocol */
+#define SIFIVE_SPI_PROTO_QUAD 4 /* 4 lines I/O protocol transfer */
+#define SIFIVE_SPI_PROTO_DUAL 2 /* 2 lines I/O protocol transfer */
+#define SIFIVE_SPI_PROTO_SINGLE 1 /* 1 line I/O protocol transfer */
+
struct sifive_spi {
void *regs; /* base address of the registers */
u32 fifo_depth;
@@ -92,28 +99,29 @@ struct sifive_spi {
u32 cs_inactive; /* Level of the CS pins when inactive*/
u32 freq;
u32 num_cs;
+ u8 fmt_proto;
};
static void sifive_spi_prep_device(struct sifive_spi *spi,
- struct dm_spi_slave_platdata *slave)
+ struct dm_spi_slave_platdata *slave_plat)
{
/* Update the chip select polarity */
- if (slave->mode & SPI_CS_HIGH)
- spi->cs_inactive &= ~BIT(slave->cs);
+ if (slave_plat->mode & SPI_CS_HIGH)
+ spi->cs_inactive &= ~BIT(slave_plat->cs);
else
- spi->cs_inactive |= BIT(slave->cs);
+ spi->cs_inactive |= BIT(slave_plat->cs);
writel(spi->cs_inactive, spi->regs + SIFIVE_SPI_REG_CSDEF);
/* Select the correct device */
- writel(slave->cs, spi->regs + SIFIVE_SPI_REG_CSID);
+ writel(slave_plat->cs, spi->regs + SIFIVE_SPI_REG_CSID);
}
static int sifive_spi_set_cs(struct sifive_spi *spi,
- struct dm_spi_slave_platdata *slave)
+ struct dm_spi_slave_platdata *slave_plat)
{
u32 cs_mode = SIFIVE_SPI_CSMODE_MODE_HOLD;
- if (slave->mode & SPI_CS_HIGH)
+ if (slave_plat->mode & SPI_CS_HIGH)
cs_mode = SIFIVE_SPI_CSMODE_MODE_AUTO;
writel(cs_mode, spi->regs + SIFIVE_SPI_REG_CSMODE);
@@ -127,8 +135,8 @@ static void sifive_spi_clear_cs(struct sifive_spi *spi)
}
static void sifive_spi_prep_transfer(struct sifive_spi *spi,
- bool is_rx_xfer,
- struct dm_spi_slave_platdata *slave)
+ struct dm_spi_slave_platdata *slave_plat,
+ u8 *rx_ptr)
{
u32 cr;
@@ -141,21 +149,26 @@ static void sifive_spi_prep_transfer(struct sifive_spi *spi,
/* LSB first? */
cr &= ~SIFIVE_SPI_FMT_ENDIAN;
- if (slave->mode & SPI_LSB_FIRST)
+ if (slave_plat->mode & SPI_LSB_FIRST)
cr |= SIFIVE_SPI_FMT_ENDIAN;
/* Number of wires ? */
cr &= ~SIFIVE_SPI_FMT_PROTO_MASK;
- if ((slave->mode & SPI_TX_QUAD) || (slave->mode & SPI_RX_QUAD))
+ switch (spi->fmt_proto) {
+ case SIFIVE_SPI_PROTO_QUAD:
cr |= SIFIVE_SPI_FMT_PROTO_QUAD;
- else if ((slave->mode & SPI_TX_DUAL) || (slave->mode & SPI_RX_DUAL))
+ break;
+ case SIFIVE_SPI_PROTO_DUAL:
cr |= SIFIVE_SPI_FMT_PROTO_DUAL;
- else
+ break;
+ default:
cr |= SIFIVE_SPI_FMT_PROTO_SINGLE;
+ break;
+ }
/* SPI direction in/out ? */
cr &= ~SIFIVE_SPI_FMT_DIR;
- if (!is_rx_xfer)
+ if (!rx_ptr)
cr |= SIFIVE_SPI_FMT_DIR;
writel(cr, spi->regs + SIFIVE_SPI_REG_FMT);
@@ -186,50 +199,62 @@ static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr)
writel(tx_data, spi->regs + SIFIVE_SPI_REG_TXDATA);
}
+static int sifive_spi_wait(struct sifive_spi *spi, u32 bit)
+{
+ return wait_for_bit_le32(spi->regs + SIFIVE_SPI_REG_IP,
+ bit, true, 100, false);
+}
+
static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev->parent;
struct sifive_spi *spi = dev_get_priv(bus);
- struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
- const unsigned char *tx_ptr = dout;
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+ const u8 *tx_ptr = dout;
u8 *rx_ptr = din;
u32 remaining_len;
int ret;
if (flags & SPI_XFER_BEGIN) {
- sifive_spi_prep_device(spi, slave);
+ sifive_spi_prep_device(spi, slave_plat);
- ret = sifive_spi_set_cs(spi, slave);
+ ret = sifive_spi_set_cs(spi, slave_plat);
if (ret)
return ret;
}
- sifive_spi_prep_transfer(spi, true, slave);
+ sifive_spi_prep_transfer(spi, slave_plat, rx_ptr);
remaining_len = bitlen / 8;
while (remaining_len) {
- int n_words, tx_words, rx_words;
-
- n_words = min(remaining_len, spi->fifo_depth);
+ unsigned int n_words = min(remaining_len, spi->fifo_depth);
+ unsigned int tx_words, rx_words;
/* Enqueue n_words for transmission */
- if (tx_ptr) {
- for (tx_words = 0; tx_words < n_words; ++tx_words) {
- sifive_spi_tx(spi, tx_ptr);
- sifive_spi_rx(spi, NULL);
- tx_ptr++;
- }
+ for (tx_words = 0; tx_words < n_words; tx_words++) {
+ if (!tx_ptr)
+ sifive_spi_tx(spi, NULL);
+ else
+ sifive_spi_tx(spi, tx_ptr++);
}
- /* Read out all the data from the RX FIFO */
if (rx_ptr) {
- for (rx_words = 0; rx_words < n_words; ++rx_words) {
- sifive_spi_tx(spi, NULL);
- sifive_spi_rx(spi, rx_ptr);
- rx_ptr++;
- }
+ /* Wait for transmission + reception to complete */
+ writel(n_words - 1, spi->regs + SIFIVE_SPI_REG_RXMARK);
+ ret = sifive_spi_wait(spi, SIFIVE_SPI_IP_RXWM);
+ if (ret)
+ return ret;
+
+ /* Read out all the data from the RX FIFO */
+ for (rx_words = 0; rx_words < n_words; rx_words++)
+ sifive_spi_rx(spi, rx_ptr++);
+ } else {
+ /* Wait for transmission to complete */
+ ret = sifive_spi_wait(spi, SIFIVE_SPI_IP_TXWM);
+ if (ret)
+ return ret;
}
remaining_len -= n_words;
@@ -241,6 +266,80 @@ static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
return 0;
}
+static int sifive_spi_exec_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct udevice *dev = slave->dev;
+ struct sifive_spi *spi = dev_get_priv(dev->parent);
+ unsigned long flags = SPI_XFER_BEGIN;
+ u8 opcode = op->cmd.opcode;
+ unsigned int pos = 0;
+ const void *tx_buf = NULL;
+ void *rx_buf = NULL;
+ int op_len, i;
+ int ret;
+
+ if (!op->addr.nbytes && !op->dummy.nbytes && !op->data.nbytes)
+ flags |= SPI_XFER_END;
+
+ spi->fmt_proto = op->cmd.buswidth;
+
+ /* send the opcode */
+ ret = sifive_spi_xfer(dev, 8, (void *)&opcode, NULL, flags);
+ if (ret < 0) {
+ dev_err(dev, "failed to xfer opcode\n");
+ return ret;
+ }
+
+ op_len = op->addr.nbytes + op->dummy.nbytes;
+ u8 op_buf[op_len];
+
+ /* send the addr + dummy */
+ if (op->addr.nbytes) {
+ /* fill address */
+ for (i = 0; i < op->addr.nbytes; i++)
+ op_buf[pos + i] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+
+ pos += op->addr.nbytes;
+
+ /* fill dummy */
+ if (op->dummy.nbytes)
+ memset(op_buf + pos, 0xff, op->dummy.nbytes);
+
+ /* make sure to set end flag, if no data bytes */
+ if (!op->data.nbytes)
+ flags |= SPI_XFER_END;
+
+ spi->fmt_proto = op->addr.buswidth;
+
+ ret = sifive_spi_xfer(dev, op_len * 8, op_buf, NULL, flags);
+ if (ret < 0) {
+ dev_err(dev, "failed to xfer addr + dummy\n");
+ return ret;
+ }
+ }
+
+ /* send/received the data */
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ rx_buf = op->data.buf.in;
+ else
+ tx_buf = op->data.buf.out;
+
+ spi->fmt_proto = op->data.buswidth;
+
+ ret = sifive_spi_xfer(dev, op->data.nbytes * 8,
+ tx_buf, rx_buf, SPI_XFER_END);
+ if (ret) {
+ dev_err(dev, "failed to xfer data\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int sifive_spi_set_speed(struct udevice *bus, uint speed)
{
struct sifive_spi *spi = dev_get_priv(bus);
@@ -309,6 +408,10 @@ static void sifive_spi_init_hw(struct sifive_spi *spi)
/* Watermark interrupts are disabled by default */
writel(0, spi->regs + SIFIVE_SPI_REG_IE);
+ /* Default watermark FIFO threshold values */
+ writel(1, spi->regs + SIFIVE_SPI_REG_TXMARK);
+ writel(0, spi->regs + SIFIVE_SPI_REG_RXMARK);
+
/* Set CS/SCK Delays and Inactive Time to defaults */
writel(SIFIVE_SPI_DELAY0_CSSCK(1) | SIFIVE_SPI_DELAY0_SCKCS(1),
spi->regs + SIFIVE_SPI_REG_DELAY0);
@@ -348,11 +451,16 @@ static int sifive_spi_probe(struct udevice *bus)
return 0;
}
+static const struct spi_controller_mem_ops sifive_spi_mem_ops = {
+ .exec_op = sifive_spi_exec_op,
+};
+
static const struct dm_spi_ops sifive_spi_ops = {
.xfer = sifive_spi_xfer,
.set_speed = sifive_spi_set_speed,
.set_mode = sifive_spi_set_mode,
.cs_info = sifive_spi_cs_info,
+ .mem_ops = &sifive_spi_mem_ops,
};
static const struct udevice_id sifive_spi_ids[] = {
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 6cafd243e04..bf06180cddf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -49,6 +49,7 @@ config ULP_WATCHDOG
config DESIGNWARE_WATCHDOG
bool "Designware watchdog timer support"
select HW_WATCHDOG if !WDT
+ default y if WDT && ROCKCHIP_RK3399
help
Enable this to support Designware Watchdog Timer IP, present e.g.
on Altera SoCFPGA SoCs.
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 89a8a44bbe2..f0ae6e67a71 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -48,6 +48,8 @@
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00500000\0" \
+ "script_offset_f=0xffe000\0" \
+ "script_size_f=0x2000\0" \
"pxefile_addr_r=0x00600000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02080000\0" \
@@ -58,6 +60,7 @@
#endif
#include <config_distro_bootcmd.h>
+#include <environment/distro/sf.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index b55e09a9ca1..bf8c60d6ddd 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -41,11 +41,26 @@
#define BOOT_TARGET_DHCP(func)
#endif
+#if CONFIG_IS_ENABLED(CMD_SF)
+ #define BOOT_TARGET_SF(func) func(SF, sf, 0)
+#else
+ #define BOOT_TARGET_SF(func)
+#endif
+
+#ifdef CONFIG_ROCKCHIP_RK3399
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_MMC(func) \
+ BOOT_TARGET_USB(func) \
+ BOOT_TARGET_PXE(func) \
+ BOOT_TARGET_DHCP(func) \
+ BOOT_TARGET_SF(func)
+#else
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_MMC(func) \
BOOT_TARGET_USB(func) \
BOOT_TARGET_PXE(func) \
BOOT_TARGET_DHCP(func)
+#endif
#ifdef CONFIG_ARM64
#define ROOT_UUID "B921B045-1DF0-41C3-AF44-4C6F280D3FAE;\0"
diff --git a/include/environment/distro/sf.h b/include/environment/distro/sf.h
new file mode 100644
index 00000000000..e793be06c6f
--- /dev/null
+++ b/include/environment/distro/sf.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Amarula Solutions(India)
+ *
+ * SF distro configurations.
+ */
+
+#ifndef __DISTRO_SF_CONFIG_H
+#define __DISTRO_SF_CONFIG_H
+
+#if CONFIG_IS_ENABLED(CMD_SF)
+#define BOOTENV_SHARED_SF(devtypel) \
+ #devtypel "_boot=" \
+ "if " #devtypel " probe ${busnum}; then " \
+ "devtype=" #devtypel "; " \
+ "run scan_sf_for_scripts; " \
+ "fi\0"
+#define BOOTENV_DEV_SF(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "busnum=" #instance "; " \
+ "run " #devtypel "_boot\0"
+#define BOOTENV_DEV_NAME_SF(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+#else
+#define BOOTENV_SHARED_SF(devtypel)
+#define BOOTENV_DEV_SF \
+ BOOT_TARGET_DEVICES_references_SF_without_CONFIG_CMD_SF
+#define BOOTENV_DEV_NAME_SF \
+ BOOT_TARGET_DEVICES_references_SF_without_CONFIG_CMD_SF
+
+#endif /* CONFIG_CMD_SF */
+
+#define BOOTENV_SF \
+ BOOTENV_SHARED_SF(sf) \
+ "scan_sf_for_scripts=" \
+ "${devtype} read ${scriptaddr} " \
+ "${script_offset_f} ${script_size_f}; " \
+ "source ${scriptaddr}; " \
+ "echo SCRIPT FAILED: continuing...\0"
+
+#endif /* __DISTRO_SF_CONFIG_H */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index ec144a08d8f..233fdc341a7 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -22,6 +22,7 @@
#define SNOR_MFR_INTEL CFI_MFR_INTEL
#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro <--> Micron */
#define SNOR_MFR_MICRON CFI_MFR_MICRON /* ST Micro <--> Micron */
+#define SNOR_MFR_ISSI CFI_MFR_PMC
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
#define SNOR_MFR_SPANSION CFI_MFR_AMD
#define SNOR_MFR_SST CFI_MFR_SST
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index be01e1e82e5..83eafb184e6 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -204,6 +204,7 @@ struct spinand_manufacturer {
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
extern const struct spinand_manufacturer micron_spinand_manufacturer;
+extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
extern const struct spinand_manufacturer winbond_spinand_manufacturer;
/**
diff --git a/include/spi-mem.h b/include/spi-mem.h
index 36814efa861..893f7bd7337 100644
--- a/include/spi-mem.h
+++ b/include/spi-mem.h
@@ -60,10 +60,12 @@
/**
* enum spi_mem_data_dir - describes the direction of a SPI memory data
* transfer from the controller perspective
+ * @SPI_MEM_NO_DATA: no data transferred
* @SPI_MEM_DATA_IN: data coming from the SPI memory
* @SPI_MEM_DATA_OUT: data sent the SPI memory
*/
enum spi_mem_data_dir {
+ SPI_MEM_NO_DATA,
SPI_MEM_DATA_IN,
SPI_MEM_DATA_OUT,
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 06:35:26 +0000