diff options
author | Steffen Dirkwinkel | 2019-10-23 07:40:41 +0200 |
---|---|---|
committer | Stefano Babic | 2020-01-07 10:26:56 +0100 |
commit | ba1444eab6c51550b2c992fc228d5f29774366bf (patch) | |
tree | 80a7d5d6ea674dcc1067d5df8e4ebbe40124a5f2 | |
parent | 9c2b1b0f0390bb680e43197fd2ba2369d21ab4f7 (diff) |
imx: cx9020: migrate cx9020 to CONFIG_DM_USB
Note: gpio7_8 was never used for usb power regulator so we remove it here
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
-rw-r--r-- | arch/arm/dts/imx53-cx9020.dts | 11 | ||||
-rw-r--r-- | board/beckhoff/mx53cx9020/mx53cx9020.c | 10 | ||||
-rw-r--r-- | configs/mx53cx9020_defconfig | 6 |
3 files changed, 16 insertions, 11 deletions
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts index 2b7f7288088..e08850999b1 100644 --- a/arch/arm/dts/imx53-cx9020.dts +++ b/arch/arm/dts/imx53-cx9020.dts @@ -36,7 +36,6 @@ MX53_PAD_GPIO_1__GPIO1_1 0x80000000 MX53_PAD_GPIO_4__GPIO1_4 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 @@ -220,3 +219,13 @@ full-duplex; }; }; + +&usbh1 { + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; + status = "okay"; +}; diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index 63a54f59b88..398e4ed7202 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -129,16 +129,6 @@ static void setup_gpio_leds(void) gpio_direction_output(GPIO_LED_PWR_G, 0); } -#ifdef CONFIG_USB_EHCI_MX5 -int board_ehci_hcd_init(int port) -{ - /* request VBUS power enable pin, GPIO7_8 */ - gpio_direction_output(IMX_GPIO_NR(7, 8), 1); - return 0; -} -#endif - - static int power_init(void) { /* nothing to do on CX9020 */ diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 5ed3e13272a..dee7c37913a 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -21,7 +21,13 @@ CONFIG_CMD_PXE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_GENERIC=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_MX5=y +CONFIG_USB_STORAGE=y +CONFIG_DM_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020" CONFIG_ENV_IS_IN_MMC=y |