diff options
| author | Sergey Lapin | 2009-05-12 12:25:14 +0400 |
|---|---|---|
| committer | Jean-Christophe PLAGNIOL-VILLARD | 2009-05-13 01:17:17 +0200 |
| commit | c63254ef5628efe1c77cb2fdba20753f9666f55d (patch) | |
| tree | 237f5ce503c1c91cdd2ee9177f00b9e7ebd2d1eb | |
| parent | f8ddcd58221cab63dd25c2324dd2032487f748b1 (diff) | |
AFEB9260 network fix
AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
not 0.
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
| -rw-r--r-- | board/afeb9260/afeb9260.c | 2 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91/at91sam9260_macb.c | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index 024db2bbe0f..a247663bb4b 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -177,7 +177,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x01); #endif return rc; } diff --git a/cpu/arm926ejs/at91/at91sam9260_macb.c b/cpu/arm926ejs/at91/at91sam9260_macb.c index ab60fb7d9bb..ea5e767ebec 100644 --- a/cpu/arm926ejs/at91/at91sam9260_macb.c +++ b/cpu/arm926ejs/at91/at91sam9260_macb.c @@ -47,7 +47,7 @@ void at91_macb_hw_init(void) at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ -#if defined(CONFIG_AT91SAM9260EK) +#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) /* * use PA10, PA11 for ETX2, ETX3. * PA23 and PA24 are for TWI EEPROM |