diff options
| author | Ye Li | 2021-02-21 08:26:24 -0800 |
|---|---|---|
| committer | Stefano Babic | 2021-07-17 13:12:23 +0200 |
| commit | cb391e339932d9e87477082b2b4b491a78b9ca41 (patch) | |
| tree | 74041916623e4d830a2c5868416e50e6014b75d4 | |
| parent | 4a837d433c673b6568f7b81428530fd336a22f9b (diff) | |
imx8mq_evk: Enable the USB3.0 host port
Setup USB clock in board codes, and enable the DWC3 XHCI and
PHY drivers to make USB3.0 host port working on i.MX8MQ EVK.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
| -rw-r--r-- | board/freescale/imx8mq_evk/imx8mq_evk.c | 4 | ||||
| -rw-r--r-- | configs/imx8mq_evk_defconfig | 9 |
2 files changed, 13 insertions, 0 deletions
diff --git a/board/freescale/imx8mq_evk/imx8mq_evk.c b/board/freescale/imx8mq_evk/imx8mq_evk.c index 93da67d7798..e3948058560 100644 --- a/board/freescale/imx8mq_evk/imx8mq_evk.c +++ b/board/freescale/imx8mq_evk/imx8mq_evk.c @@ -86,6 +86,10 @@ int board_init(void) setup_fec(); #endif +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_DWC3) + init_usb_clk(); +#endif + return 0; } diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 1df4192401e..f4d53976746 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -53,3 +53,12 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RESET=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y +CONFIG_CMD_USB=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_PHY=y +CONFIG_PHY_IMX8MQ_USB=y |