ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766

RX51 has a secure logic which uses different parameters compared to
traditional implementation. So, make the generic secure acr write
over-ride-able by board file and refactor rx51 code to use this.

While at it, enable the OMAP3 specific errata code for 454179, 430973,
621766.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

4 files changed, 37 insertions, 32 deletions

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 51a1c5816c3..b064c0cc834 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -415,31 +415,30 @@ static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
 	do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
 }
 
-void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
-			  u32 cpu_variant, u32 cpu_rev)
+void __weak omap3_set_aux_cr_secure(u32 acr)
 {
-	if (get_device_type() == GP_DEVICE) {
-		omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
-	} else {
-		struct emu_hal_params emu_romcode_params;
-		emu_romcode_params.num_params = 1;
-		emu_romcode_params.param1 = acr;
-		omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
-				       (u32 *)&emu_romcode_params);
-	}
+	struct emu_hal_params emu_romcode_params;
+
+	emu_romcode_params.num_params = 1;
+	emu_romcode_params.param1 = acr;
+	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+			       (u32 *)&emu_romcode_params);
 }
 
-static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+			  u32 cpu_variant, u32 cpu_rev)
 {
-	u32 acr;
+	/* Write ACR - affects secure banked bits */
+	if (get_device_type() == GP_DEVICE)
+		omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
+	else
+		omap3_set_aux_cr_secure(acr);
 
-	/* Read ACR */
-	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
-	acr &= ~clear_bits;
-	acr |= set_bits;
-	v7_arch_cp15_set_acr(acr, 0, 0, 0, 0);
+	/* Write ACR - affects non-secure banked bits - some erratas need it */
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
 }
 
+
 #ifndef CONFIG_SYS_L2CACHE_OFF
 static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
 {
@@ -449,9 +448,8 @@ static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
 	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
 	acr &= ~clear_bits;
 	acr |= set_bits;
+	v7_arch_cp15_set_acr(acr, 0, 0, 0, 0);
 
-	/* Write ACR - affects non-secure banked bits */
-	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
 }
 
 /* Invalidate the entire L2 cache from secure mode */
@@ -470,10 +468,9 @@ static void omap3_invalidate_l2_cache_secure(void)
 
 void v7_outer_cache_enable(void)
 {
-	/* Set L2EN */
-	omap3_update_aux_cr_secure(0x2, 0);
 
 	/*
+	 * Set L2EN
 	 * On some revisions L2EN bit is banked on some revisions it's not
 	 * No harm in setting both banked bits(in fact this is required
 	 * by an erratum)
@@ -483,10 +480,8 @@ void v7_outer_cache_enable(void)
 
 void omap3_outer_cache_disable(void)
 {
-	/* Clear L2EN */
-	omap3_update_aux_cr_secure(0, 0x2);
-
 	/*
+	 * Clear L2EN
 	 * On some revisions L2EN bit is banked on some revisions it's not
 	 * No harm in clearing both banked bits(in fact this is required
 	 * by an erratum)
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 0c77a22ccff..3e45ce184ba 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -73,5 +73,6 @@ void power_init_r(void);
 void dieid_num_r(void);
 void get_dieid(u32 *id);
 void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
+void omap3_set_aux_cr_secure(u32 acr);
 u32 warm_reset(void);
 #endif
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index 08fcaf21b3c..3d019b01428 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -341,6 +341,17 @@ static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
 	do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
 }
 
+void omap3_set_aux_cr_secure(u32 acr)
+{
+	struct emu_hal_params_rx51 emu_romcode_params = { 0, };
+
+	emu_romcode_params.num_params = 2;
+	emu_romcode_params.param1 = acr;
+
+	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+			       (u32 *)&emu_romcode_params);
+}
+
 /*
  * Routine: omap3_update_aux_cr_secure_rx51
  * Description: Modify the contents Auxiliary Control Register.
@@ -350,19 +361,13 @@ static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
  */
 static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
 {
-	struct emu_hal_params_rx51 emu_romcode_params = { 0, };
 	u32 acr;
 
 	/* Read ACR */
 	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
 	acr &= ~clear_bits;
 	acr |= set_bits;
-
-	emu_romcode_params.num_params = 2;
-	emu_romcode_params.param1 = acr;
-
-	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
-				(u32 *)&emu_romcode_params);
+	omap3_set_aux_cr_secure(acr);
 }
 
 /*
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 442e16ae686..152a6e564b0 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -29,6 +29,10 @@
 #define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
 #define CONFIG_OMAP_COMMON
 #define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_NOKIA_RX51