nand: mxc: Switch NAND SPL to generic SPL

This also fixes support for mx31pdk and tx25, which had been broken by commit
e05e5de7fae5bec79617e113916dac6631251156.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

20 files changed, 81 insertions, 383 deletions

diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 552279feeec..0a9cf1d9664 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -200,7 +200,6 @@ reset:
 
 /*------------------------------------------------------------------------------*/
 
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_NAND_SPL)
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
@@ -269,6 +268,8 @@ relocate_done:
 
 	bx	lr
 
+#ifndef CONFIG_SPL_BUILD
+
 _rel_dyn_start_ofs:
 	.word __rel_dyn_start - _start
 _rel_dyn_end_ofs:
diff --git a/board/freescale/mx31pdk/Makefile b/board/freescale/mx31pdk/Makefile
index 5b7cafd9f65..b91072285a5 100644
--- a/board/freescale/mx31pdk/Makefile
+++ b/board/freescale/mx31pdk/Makefile
@@ -27,6 +27,9 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
+ifdef CONFIG_SPL_BUILD
+SOBJS	:= lowlevel_init.o
+endif
 COBJS	:= mx31pdk.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/freescale/mx31pdk/config.mk b/board/freescale/mx31pdk/config.mk
deleted file mode 100644
index de2c6429c56..00000000000
--- a/board/freescale/mx31pdk/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x87ec0000
-else
-CONFIG_SYS_TEXT_BASE = 0x87f00000
-endif
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 895396cd623..3d0d419e273 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -36,6 +36,14 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong bootflag)
+{
+	relocate_code(0, NULL, CONFIG_SPL_TEXT_BASE);
+	asm volatile("ldr pc, =nand_boot");
+}
+#endif
+
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
diff --git a/board/karo/tx25/Makefile b/board/karo/tx25/Makefile
index 9617fa52884..c26bf36b55e 100644
--- a/board/karo/tx25/Makefile
+++ b/board/karo/tx25/Makefile
@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= tx25.o
+ifdef CONFIG_SPL_BUILD
 SOBJS	:= lowlevel_init.o
+endif
+COBJS	:= tx25.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/karo/tx25/config.mk b/board/karo/tx25/config.mk
deleted file mode 100644
index 18b288392cf..00000000000
--- a/board/karo/tx25/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-ifdef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = 0x810c0000
-else
-CONFIG_SYS_TEXT_BASE = 0x81200000
-endif
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 362f00a173f..69ee590e263 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -33,6 +33,14 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong bootflag)
+{
+	relocate_code(0, NULL, CONFIG_SPL_TEXT_BASE);
+	asm volatile("ldr pc, =nand_boot");
+}
+#endif
+
 #ifdef CONFIG_FEC_MXC
 #define GPIO_FEC_RESET_B	IMX_GPIO_NR(4, 7)
 #define GPIO_FEC_ENABLE_B	IMX_GPIO_NR(4, 9)
diff --git a/boards.cfg b/boards.cfg
index 1acf56acb3f..860d8f1055d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,7 +45,7 @@ imx31_phycore                arm         arm1136     -                   -
 imx31_phycore_eet            arm         arm1136     imx31_phycore       -              mx31         imx31_phycore:IMX31_PHYCORE_EET
 qong                         arm         arm1136     -                   davedenx       mx31
 mx31ads                      arm         arm1136     -                   freescale      mx31
-mx31pdk                      arm         arm1136     -                   freescale      mx31         mx31pdk:NAND_U_BOOT
+mx31pdk                      arm         arm1136     -                   freescale      mx31
 tt01                         arm         arm1136     -                   hale           mx31
 imx31_litekit                arm         arm1136     -                   logicpd        mx31
 flea3                        arm         arm1136     -                   CarMediaLab    mx35
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index 5a9a2fb0710..645b3746c8a 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -40,15 +40,15 @@ Boards which are not fixed to support relocation will be REMOVED!
 
 -----------------------------------------------------------------------------
 
-For boards which boot from nand_spl, it is possible to save one copy
+For boards which boot from spl, it is possible to save one copy
 if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
 is copied again in relocate_code().
 
-example for the tx25 board:
+example for the tx25 board booting from NAND Flash:
 
 a) cpu starts
 b) it copies the first page in nand to internal ram
-   (nand_spl_code)
+   (spl code)
 c) end executes this code
 d) this initialize CPU, RAM, ... and copy itself to RAM
    (this bin must fit in one page, so board_init_f()
@@ -79,20 +79,20 @@ TODO
 
 -----------------------------------------------------------------------------
 
-Relocation with NAND_SPL (example for the tx25):
+Relocation with SPL (example for the tx25 booting from NAND Flash):
 
 - cpu copies the first page from NAND to 0xbb000000 (IMX_NFC_BASE)
   and start with code execution on this address.
 
-- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
-  which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE	and loads
+- The First page contains u-boot code from drivers/mtd/nand/mxc_nand_spl.c
+  which inits the dram, cpu registers, reloacte itself to CONFIG_SPL_TEXT_BASE	and loads
   the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
   @CONFIG_SYS_NAND_U_BOOT_START
 
 - This u-boot does no RAM init, nor CPU register setup. Just look
   where it has to copy and relocate itself to this address. If
   relocate address = CONFIG_SYS_TEXT_BASE (not the same, as the
-  CONFIG_SYS_TEXT_BASE from the nand_spl code), then there is no need
+  CONFIG_SPL_TEXT_BASE from the spl code), then there is no need
   to copy, just go on with bss clear and jump to board_init_r.
 
 -----------------------------------------------------------------------------
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c77c0c4f0f6..bcb71619b58 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -82,6 +82,7 @@ COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
 else  # minimal SPL drivers
 
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
 
 endif # drivers
 endif # nand
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 29ceab37c9b..507bbc25445 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -26,7 +26,7 @@
 	defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
 
 #define DRIVER_NAME "mxc_nand"
 
@@ -36,9 +36,9 @@ struct mxc_nand_host {
 	struct mtd_info			mtd;
 	struct nand_chip		*nand;
 
-	struct fsl_nfc_regs __iomem	*regs;
+	struct mxc_nand_regs __iomem	*regs;
 #ifdef MXC_NFC_V3_2
-	struct fsl_nfc_ip_regs __iomem	*ip_regs;
+	struct mxc_nand_ip_regs __iomem	*ip_regs;
 #endif
 	int				spare_only;
 	int				status_request;
@@ -1213,10 +1213,10 @@ int board_nand_init(struct nand_chip *this)
 	this->read_buf = mxc_nand_read_buf;
 	this->verify_buf = mxc_nand_verify_buf;
 
-	host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+	host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
 #ifdef MXC_NFC_V3_2
 	host->ip_regs =
-		(struct fsl_nfc_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+		(struct mxc_nand_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
 #endif
 	host->clk_act = 1;
 
diff --git a/include/fsl_nfc.h b/drivers/mtd/nand/mxc_nand.h
index 48a6448977d..308ff8d8a8e 100644
--- a/include/fsl_nfc.h
+++ b/drivers/mtd/nand/mxc_nand.h
@@ -20,8 +20,8 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __FSL_NFC_H
-#define __FSL_NFC_H
+#ifndef __MXC_NAND_H
+#define __MXC_NAND_H
 
 /*
  * Register map and bit definitions for the Freescale NAND Flash Controller
@@ -73,7 +73,7 @@
 #define NAND_MXC_REG_OFFSET		0x1e00
 #endif
 
-struct fsl_nfc_regs {
+struct mxc_nand_regs {
 	u8 main_area[NAND_MXC_NR_BUFS][0x200];
 	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
 	/*
@@ -131,7 +131,7 @@ struct fsl_nfc_regs {
 };
 
 #ifdef MXC_NFC_V3_2
-struct fsl_nfc_ip_regs {
+struct mxc_nand_ip_regs {
 	u32 wrprot;
 	u32 wrprot_unlock_blkaddr[8];
 	u32 config2;
@@ -222,4 +222,4 @@ struct fsl_nfc_ip_regs {
 #define writenfc	writel
 #endif
 
-#endif /* __FSL_NFC_H */
+#endif /* __MXC_NAND_H */
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/drivers/mtd/nand/mxc_nand_spl.c
index 1096727aed3..09f23c30c4e 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/drivers/mtd/nand/mxc_nand_spl.c
@@ -28,13 +28,13 @@
 #include <nand.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/io.h>
-#include <fsl_nfc.h>
+#include "mxc_nand.h"
 
 #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR;
 #elif defined(MXC_NFC_V3_2)
-static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
-static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+static struct mxc_nand_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct mxc_nand_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
 #endif
 
 static void nfc_wait_ready(void)
@@ -68,7 +68,7 @@ static void nfc_nand_init(void)
 
 	tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
 			NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
-		NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+		NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_OOBSIZE / 2) |
 		NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
 		NFC_V3_CONFIG2_ONE_CYCLE;
 	if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
@@ -81,7 +81,7 @@ static void nfc_nand_init(void)
 	 * if spare size is larger that 16 bytes per 512 byte hunk
 	 * then use 8 symbol correction instead of 4
 	 */
-	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+	if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
 		tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
 	else
 		tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
@@ -102,7 +102,7 @@ static void nfc_nand_init(void)
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int config1;
 
-	writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+	writenfc(CONFIG_SYS_NAND_OOBSIZE / 2, &nfc->spare_area_size);
 
 	/* unlocking RAM Buff */
 	writenfc(0x2, &nfc->config);
@@ -115,7 +115,7 @@ static void nfc_nand_init(void)
 	 * if spare size is larger that 16 bytes per 512 byte hunk
 	 * then use 8 symbol correction instead of 4
 	 */
-	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+	if (CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16)
 		config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
 	else
 		config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
@@ -204,7 +204,7 @@ static int nfc_nand_check_ecc(void)
 #elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 	u32 ecc_status = readl(&nfc->ecc_status_result);
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
-	int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
+	int err_limit = CONFIG_SYS_NAND_OOBSIZE / ecc_per_page > 16 ? 8 : 4;
 	int subpages = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 
 	do {
@@ -332,14 +332,6 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
 	return 0;
 }
 
-#if defined(CONFIG_ARM)
-void board_init_f (ulong bootflag)
-{
-	relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL,
-		       CONFIG_SYS_TEXT_BASE);
-}
-#endif
-
 /*
  * The main entry for NAND booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 34e429577e0..80ec08e20d8 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,7 +45,16 @@
 
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE	2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE	0x87dc0000
+#define CONFIG_SYS_TEXT_BASE	0x87e00000
+
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
@@ -116,7 +125,7 @@
 	"bootcmd=run bootcmd_net\0"					\
 	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
 		"tftpboot 0x81000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; "		\
+	"prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "		\
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
@@ -163,7 +172,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 						GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
-						CONFIG_SYS_GBL_DATA_OFFSET)
+						CONFIG_SYS_INIT_RAM_SIZE)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -189,10 +198,10 @@
 /* NAND configuration for the NAND_SPL */
 
 /* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x3f800
 /* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x87f00000
+#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
 
 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 80194d824c1..e72f8f66b1d 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -21,6 +21,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/imx-regs.h>
 
 /*
  * KARO TX25 board - SoC Configuration
@@ -31,8 +32,14 @@
 
 #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
 
-/* NAND BOOT is the only boot method */
-#define CONFIG_NAND_U_BOOT
+#define CONFIG_SPL
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LDSCRIPT		"arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE		2048
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE		0x810c0000
+#define CONFIG_SYS_TEXT_BASE		0x81200000
 
 #ifndef MACH_TYPE_TX25
 #define MACH_TYPE_TX25	2177
@@ -40,16 +47,16 @@
 
 #define CONFIG_MACH_TYPE MACH_TYPE_TX25
 
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 /* Start copying real U-boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x30000
 
-#define CONFIG_SYS_NAND_U_BOOT_DST      (0x81200000)
+#define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_SPARE_SIZE	64
+#define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_SIZE		(128 * 1024 * 1024)
@@ -173,7 +180,6 @@
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
-					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(IMX_RAM_BASE + IMX_RAM_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
deleted file mode 100644
index 3d57059f508..00000000000
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_NAND_SPL	= y
-PAD_TO	:= 2048
-
-include $(TOPDIR)/config.mk
-
-nandobj	:= $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
-	   $(LDFLAGS_FINAL)
-AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS	= start.o crt0.o lowlevel_init.o
-COBJS	= nand_boot_fsl_nfc.o
-
-SRCS	:= $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS	+= $(SRCTREE)/arch/arm/cpu/arm1136/start.S
-SRCS	+= $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS	+= $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS	:= $(SOBJS) $(COBJS)
-LNDIR	:= $(nandobj)board/$(BOARDDIR)
-
-ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all:	$(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
-	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-		-Map $(nandobj)u-boot-spl.map \
-		-o $@
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-		-ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o:	$(SRCTREE)/arch/arm/cpu/arm1136/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/arch/arm/lib/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/board/freescale/mx31pdk/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/nand_spl/%.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds
deleted file mode 100644
index 5f2b5e20228..00000000000
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		start.o			(.text)
-		lowlevel_init.o		(.text)
-		nand_boot_fsl_nfc.o	(.text)
-		*(.text)
-		. = 2K;
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = ALIGN(4);
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		*(SORT(.u_boot_list*));
-	}
-
-	. = ALIGN(4);
-
-	__image_copy_end = .;
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end = .;
-	}
-
-	/DISCARD/ : { *(.bss*) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile
deleted file mode 100644
index 9f9c5893cf0..00000000000
--- a/nand_spl/board/karo/tx25/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-#
-# (C) Copyright 2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundatio; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_NAND_SPL	= y
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
-
-nandobj	:= $(OBJTREE)/nand_spl/
-
-LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
-	   $(LDFLAGS_FINAL)
-AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-CFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
-
-SOBJS	= start.o crt0.o lowlevel_init.o
-COBJS	= nand_boot_fsl_nfc.o
-
-SRCS	:= $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c
-SRCS	+= $(SRCTREE)/arch/arm/cpu/arm926ejs/start.S
-SRCS	+= $(SRCTREE)/arch/arm/lib/crt0.S
-SRCS	+= $(SRCTREE)/board/karo/tx25/lowlevel_init.S
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS	:= $(SOBJS) $(COBJS)
-LNDIR	:= $(nandobj)board/$(BOARDDIR)
-
-ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
-
-all:	$(obj).depend $(ALL)
-
-$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
-
-$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
-	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(nandobj)u-boot-spl:	$(OBJS) $(nandobj)u-boot.lds
-	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
-		-Map $(nandobj)u-boot-spl.map \
-		-o $@
-
-$(nandobj)u-boot.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-		-ansi -D__ASSEMBLY__ -P - <$< >$@
-
-#########################################################################
-
-$(obj)%.o:	$(SRCTREE)/arch/arm/cpu/arm926ejs/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/arch/arm/lib/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/board/karo/tx25/%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(SRCTREE)/nand_spl/%.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/nand_spl/board/karo/tx25/config.mk b/nand_spl/board/karo/tx25/config.mk
deleted file mode 100644
index 68afbf1dccf..00000000000
--- a/nand_spl/board/karo/tx25/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-PAD_TO	:= 2048
diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds
deleted file mode 100644
index e5363e2268d..00000000000
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		start.o			(.text)
-		lowlevel_init.o		(.text)
-		nand_boot_fsl_nfc.o	(.text)
-		*(.text)
-		. = 2K;
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = ALIGN(4);
-
-	. = ALIGN(4);
-	.u_boot_list : {
-	*(SORT(.u_boot_list*));
-	}
-
-	. = ALIGN(4);
-
-	__image_copy_end = .;
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end = .;
-	}
-
-	/DISCARD/ : { *(.bss*) }
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynsym*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.hash*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}