diff options
| author | Kunihiko Hayashi | 2022-07-13 10:59:45 +0900 |
|---|---|---|
| committer | Tom Rini | 2022-08-08 11:37:57 -0400 |
| commit | dd8c3136aa8abb61281cc32f1ce19e1f84a66922 (patch) | |
| tree | 6526e05b60116dc595430fd4bb08a597f7dd015c | |
| parent | 5a28aa6a7b2c9fff1d852ba0093f47987c5b0235 (diff) | |
ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins
UniPhier LD20, PXs2 and PXs3 boards have ethernet phy that has RX/TX delays
of RGMII interface using pull-ups on the RXDLY and TXDLY pins.
So should set the phy-mode to "rgmii-id" to show that RX/TX delays are
enabled.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
| -rw-r--r-- | arch/arm/dts/uniphier-ld20.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/dts/uniphier-pxs2.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/dts/uniphier-pxs3.dtsi | 4 |
3 files changed, 4 insertions, 4 deletions
diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 5e7143ed012..4549935c421 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -734,7 +734,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 899ff379c9b..7a8b6c10f4d 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -583,7 +583,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index c4344926d95..004656c992b 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -564,7 +564,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; @@ -585,7 +585,7 @@ clocks = <&sys_clk 7>; reset-names = "ether"; resets = <&sys_rst 7>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 1>; |