diff options
| author | Matthias Weisser | 2011-07-06 00:28:30 +0000 |
|---|---|---|
| committer | Albert ARIBAUD | 2011-07-14 15:41:24 +0200 |
| commit | dddb7c9ffdb3813c1242aa43b935dd3484c53a35 (patch) | |
| tree | fb93f7fe9f1cfb376540b80362da10c7a4a8b039 | |
| parent | dea5387d98d809ce0a9c764e4b82b90b2d61b868 (diff) | |
imx: Add support for USB EHCI on imx25
Adding support for USB host on imx25 using the internal PHY. Changing the name
of base address define for imx31 to get some unification.
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
| -rw-r--r-- | arch/arm/include/asm/arch-mx31/imx-regs.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-mxc.c | 33 |
2 files changed, 26 insertions, 9 deletions
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 306f966139b..3c8d6076d22 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -746,7 +746,7 @@ enum iomux_pins { #define IRAM_SIZE (16 * 1024) #define MX31_AIPS1_BASE_ADDR 0x43f00000 -#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000) +#define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000) /* USB portsc */ /* values for portsc field */ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 6af35aba5f6..a0cfbb74bd9 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -29,6 +29,14 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 +#ifdef CONFIG_MX25 +#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6) +#define MX25_USB_CTRL_HSTD_BIT (1<<5) +#define MX25_USB_CTRL_USBTE_BIT (1<<4) +#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3) +#endif + +#ifdef CONFIG_MX31 #define MX31_OTG_SIC_SHIFT 29 #define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) @@ -42,12 +50,19 @@ #define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#endif static int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; + +#ifdef CONFIG_MX25 + v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT | + MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT; +#endif + #ifdef CONFIG_MX31 - v = readl(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET); + v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); switch (port) { case 0: /* OTG port */ @@ -85,36 +100,38 @@ static int mxc_set_usbcontrol(int port, unsigned int flags) default: return -EINVAL; } - - writel(v, MX31_OTG_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET); #endif - return 0; + + writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); + return 0; } int ehci_hcd_init(void) { - u32 tmp; struct usb_ehci *ehci; +#ifdef CONFIG_MX31 + u32 tmp; struct clock_control_regs *sc_regs = (struct clock_control_regs *)CCM_BASE; tmp = __raw_readl(&sc_regs->ccmr); __raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ; +#endif udelay(80); /* Take USB2 */ - ehci = (struct usb_ehci *)(MX31_OTG_BASE_ADDR + + ehci = (struct usb_ehci *)(IMX_USB_BASE + (0x200 * CONFIG_MXC_USB_PORT)); hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); setbits_le32(&ehci->usbmode, CM_HOST); +#ifdef CONFIG_MX31 setbits_le32(&ehci->control, USB_EN); __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); - +#endif mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); udelay(10000); |