diff options
| author | Steve Sakoman | 2010-09-20 09:55:24 -0700 |
|---|---|---|
| committer | Sandeep Paulraj | 2010-09-28 13:54:47 -0400 |
| commit | e299e3f7a3796fd7051efea8177e85b794a99d7c (patch) | |
| tree | 2a7309ed6a45120bf67e017e4f38fa0268ce1152 | |
| parent | 7ca3f9c5688b9f42d8dcc765c0f982be6542f4b3 (diff) | |
ARMV7: OMAP3: Update Beagle xM pinmux with USB hub and DVI gpio setup
This patch adds missing pinmux setup for 4 GPIO signals used on the Beagle xM:
- USB hub reset (gpio_56)
- P8 USB hub reset (gpio_63)
- DVI enable (gpio_129)
- P8 DVI enable (gpio_170)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| -rw-r--r-- | board/ti/beagle/beagle.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index d86033772b8..ec0da6d7454 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -386,6 +386,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ #define MUX_BEAGLE_XM() \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ + MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ + MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ |