diff options
| author | Weijie Gao | 2021-03-05 10:27:46 +0800 |
|---|---|---|
| committer | Tom Rini | 2021-03-20 16:24:27 -0400 |
| commit | e8b98f02708c23fe32e7e26fac56acf9e12a5b8d (patch) | |
| tree | d4fe3b4cc931b05f9a310b79a1200fcdd273ddc8 | |
| parent | e21599ed001d37e9aadc56e2da1d1d7a17da1216 (diff) | |
dts: mt7629: enable JTAG pins by default
The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
used. These LED pins on reference boards are used as JTAG socket. So it's
a good idea to change the default state to JTAG, and this will make it
convenience for debugging.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
| -rw-r--r-- | arch/arm/dts/mt7629-rfb.dts | 10 | ||||
| -rw-r--r-- | arch/arm/dts/mt7629.dtsi | 6 |
2 files changed, 16 insertions, 0 deletions
diff --git a/arch/arm/dts/mt7629-rfb.dts b/arch/arm/dts/mt7629-rfb.dts index df43cc49c54..f2e4e9548b2 100644 --- a/arch/arm/dts/mt7629-rfb.dts +++ b/arch/arm/dts/mt7629-rfb.dts @@ -36,6 +36,16 @@ }; &pinctrl { + state_default: pinmux_conf { + u-boot,dm-pre-reloc; + + mux { + function = "jtag"; + groups = "ephy_leds_jtag"; + u-boot,dm-pre-reloc; + }; + }; + snfi_pins: snfi-pins { mux { function = "flash"; diff --git a/arch/arm/dts/mt7629.dtsi b/arch/arm/dts/mt7629.dtsi index 05394266e06..7dea7809c70 100644 --- a/arch/arm/dts/mt7629.dtsi +++ b/arch/arm/dts/mt7629.dtsi @@ -152,6 +152,12 @@ compatible = "mediatek,mt7629-pinctrl"; reg = <0x10217000 0x8000>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux_conf { + }; + gpio: gpio-controller { gpio-controller; #gpio-cells = <2>; |