diff options
author | Marek Vasut | 2018-06-18 04:09:10 +0200 |
---|---|---|
committer | Marek Vasut | 2018-06-19 06:15:55 +0200 |
commit | ea273e8d72e994ea2403570bad7737e23cca593f (patch) | |
tree | a964b9fbadad0a69aafef2132d45afe9c85a715b | |
parent | 159b3292266aab1064a594063f7ac5565140121a (diff) |
ARM: dts: rmobile: Move the PHY reset GPIOs into PHY nodes
Both the RAVB and SH ether driver now support parsing the PHY reset
GPIOs from both the PHY nodes and the MAC nodes, move the reset GPIOs
back into the PHY nodes to minimize DT difference between U-Boot and
Linux.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-rw-r--r-- | arch/arm/dts/r8a77970-eagle.dts | 2 | ||||
-rw-r--r-- | arch/arm/dts/salvator-common.dtsi | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/dts/r8a77970-eagle.dts b/arch/arm/dts/r8a77970-eagle.dts index 5b8b2f87045..5dcad634926 100644 --- a/arch/arm/dts/r8a77970-eagle.dts +++ b/arch/arm/dts/r8a77970-eagle.dts @@ -39,13 +39,13 @@ phy-handle = <&phy0>; phy-mode = "rgmii-id"; status = "okay"; - reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 21dbb21184a..a36e0ebca07 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -257,7 +257,6 @@ pinctrl-names = "default"; phy-handle = <&phy0>; phy-mode = "rgmii-txid"; - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; status = "okay"; phy0: ethernet-phy@0 { @@ -265,6 +264,7 @@ reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; }; |