diff options
| author | Quentin Schulz | 2024-07-04 14:53:32 +0200 |
|---|---|---|
| committer | Kever Yang | 2024-07-17 14:48:18 +0800 |
| commit | f30539b8c4dda8b6c5228e4664e9451b639e9d80 (patch) | |
| tree | 7cdb1041f42bd841c1241b7614916f8302f03b21 | |
| parent | 3af939c049a7dddba3fb4cfd62c63dcd81214e41 (diff) | |
rockchip: jaguar-rk3588: add PCIe M.2 M-KEY NVMe support
Jaguar has an M.2 M-KEY slot for NVMes, connected to the PCIe3 4-lane
PHY on RK3588.
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y is technically not necessary since
it's required only for the M.2 E-KEY slot on the main PCB, but that is
used typically for WiFi+BT modules, or on the mezzanine connector but
the features exposed behind that connector aren't supported in U-Boot
(no DT for it right now). However, if the PHY driver is missing, we get
the following error message:
pcie_dw_rockchip pcie@fe170000: failed to get pcie phy (ret=-19)
and you would need to know which PCIe controller that is before deciding
to ignore it. While after enabling the PHY driver, we are greeted with:
pcie_dw_rockchip pcie@fe170000: PCIe-2 Link Fail
which is a bit more acceptable (to me).
The other option would be to disable the PCIe2 PHYs/controllers in the
DT, which I'm not too fond of.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| -rw-r--r-- | configs/jaguar-rk3588_defconfig | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig index 36bf34d97c8..18006467dde 100644 --- a/configs/jaguar-rk3588_defconfig +++ b/configs/jaguar-rk3588_defconfig @@ -13,6 +13,7 @@ CONFIG_TARGET_JAGUAR_RK3588=y CONFIG_DEBUG_UART_BASE=0xfeb50000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 +CONFIG_PCI=y CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -40,6 +41,7 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SF is not set CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set @@ -88,7 +90,10 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y CONFIG_SPL_PINCTRL=y CONFIG_DM_PMIC=y CONFIG_PMIC_RK8XX=y |