aboutsummaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorChristophe Leroy2017-07-06 10:33:27 +0200
committerTom Rini2017-07-08 15:56:04 -0400
commitdd7ff4721aaf46533a42ebd017aecd70cafa98e3 (patch)
tree4ee87b35080c7a0258e0789ab71d54546f0fe0ab /README
parentf88c431b8a264872e9391e039541792a13a5076a (diff)
powerpc, 8xx: move Serial driver to drivers/serial/
At the same time, move to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Diffstat (limited to 'README')
-rw-r--r--README19
1 files changed, 0 insertions, 19 deletions
diff --git a/README b/README
index 504b120bc05..ee35dec5b5c 100644
--- a/README
+++ b/README
@@ -687,29 +687,10 @@ The following options need to be configured:
Define this variable to enable hw flow control in serial driver.
Current user of this option is drivers/serial/nsl16550.c driver
-- Console Interface:
- Depending on board, define exactly one serial port
- (CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2),
- or switch off the serial console by defining
- CONFIG_8xx_CONS_NONE
-
- Note: if CONFIG_8xx_CONS_NONE is defined, the serial
- port routines must be defined elsewhere
- (i.e. serial_init(), serial_getc(), ...)
-
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
CONFIG_SYS_BAUDRATE_TABLE, see below.
- CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale
-
-- Console Rx buffer length
- With CONFIG_SYS_SMC_RXBUFLEN it is possible to define
- the maximum receive buffer length for the SMC.
- This option is actual only for 8xx possible.
- If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE
- must be defined, to setup the maximum idle timeout for
- the SMC.
- Autoboot Command:
CONFIG_BOOTCOMMAND