diff options
| author | Troy Kisky | 2012-08-15 10:31:20 +0000 |
|---|---|---|
| committer | Albert ARIBAUD | 2012-09-01 14:58:26 +0200 |
| commit | 124a06d7fbbf82f47304d499418460312a725ad6 (patch) | |
| tree | 1d062a5e07a1904b965324cc152fa7d58432becb /arch/arm/cpu/armv7/mx6 | |
| parent | d1c679a46d4f5ad38f7e23b9a8c4bbf0fb3f9f4d (diff) | |
imx-common/cmd_bmode.c: add imx bmode (bootmode) command
This is useful for forcing the ROM's
usb downloader to activate upon a watchdog reset.
Or, you can boot from either SD Card.
Currently, support added for MX53 and MX6Q
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Note: MX53 support untested.
Acked-by: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'arch/arm/cpu/armv7/mx6')
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/soc.c | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 84b458c7eb0..7380ffe46c5 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -29,6 +29,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> u32 get_cpu_rev(void) { @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif + +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; |