omap-common: Common boot code OMAP3 support and cleanup

This introduces OMAP3 support for the common omap boot code, as well as a
major cleanup of the common omap boot code.

First, the omap_boot_parameters structure becomes platform-specific, since its
definition differs a bit across omap platforms. The offsets are removed as well
since it is U-Boot's coding style to use structures for mapping such kind of
data (in the sense that it is similar to registers). It is correct to assume
that romcode structure encoding is the same as U-Boot, given the description
of these structures in the TRMs.

The original address provided by the bootrom is passed to the U-Boot binary
instead of a duplicate of the structure stored in global data. This allows to
have only the relevant (boot device and mode) information stored in global data.
It is also expected that the address where the bootrom stores that information
is not overridden by the U-Boot SPL or U-Boot.

The save_omap_boot_params is expected to handle all special cases where the data
provided by the bootrom cannot be used as-is, so that spl_boot_device and
spl_boot_mode only return the data from global data.

All of this is only relevant when the U-Boot SPL is used. In cases it is not,
save_boot_params should fallback to its weak (or board-specific) definition.
save_omap_boot_params should not be called in that context either.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>

2 files changed, 0 insertions, 69 deletions

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index b064c0cc834..17cb5b759b9 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -18,7 +18,6 @@
  */
 #include <common.h>
 #include <dm.h>
-#include <mmc.h>
 #include <spl.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
@@ -27,8 +26,6 @@
 #include <asm/armv7.h>
 #include <asm/gpio.h>
 #include <asm/omap_common.h>
-#include <asm/arch/mmc_host_def.h>
-#include <i2c.h>
 #include <linux/compiler.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -73,62 +70,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
 
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-/*
-* We use static variables because global data is not ready yet.
-* Initialized data is available in SPL right from the beginning.
-* We would not typically need to save these parameters in regular
-* U-Boot. This is needed only in SPL at the moment.
-*/
-u32 omap3_boot_device = BOOT_DEVICE_NAND;
-
-/* auto boot mode detection is not possible for OMAP3 - hard code */
-u32 spl_boot_mode(void)
-{
-	switch (spl_boot_device()) {
-	case BOOT_DEVICE_MMC2:
-		return MMCSD_MODE_RAW;
-	case BOOT_DEVICE_MMC1:
-		return MMCSD_MODE_FS;
-		break;
-	default:
-		puts("spl: ERROR:  unknown device - can't select boot mode\n");
-		hang();
-	}
-}
-
-u32 spl_boot_device(void)
-{
-	return omap3_boot_device;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	switch (spl_boot_device()) {
-	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0, -1, -1);
-		break;
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0, -1, -1);
-		break;
-	}
-	return 0;
-}
-
-void spl_board_init(void)
-{
-	preloader_console_init();
-#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
-	gpmc_init();
-#endif
-#ifdef CONFIG_SPL_I2C_SUPPORT
-	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-#endif
-}
-#endif /* CONFIG_SPL_BUILD */
-
-
 /******************************************************************************
  * Routine: secure_unlock
  * Description: Setup security registers for access
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 249761308e6..1e587723cec 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -16,16 +16,6 @@
 #include <asm/arch/clocks_omap3.h>
 #include <linux/linkage.h>
 
-#ifdef CONFIG_SPL_BUILD
-ENTRY(save_boot_params)
-	ldr	r4, =omap3_boot_device
-	ldr	r5, [r0, #0x4]
-	and	r5, r5, #0xff
-	str	r5, [r4]
-	b	save_boot_params_ret
-ENDPROC(save_boot_params)
-#endif
-
 /*
  * Funtion for making PPA HAL API calls in secure devices
  * Input: