ARM: at91: collect SoC sources into mach-at91

This commit moves source files as follows:

  arch/arm/cpu/arm920t/at91/*   -> arch/arm/mach-at91/arm920t/*
  arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/*
  arch/arm/cpu/armv7/at91/*     -> arch/arm/mach-at91/armv7/*
  arch/arm/cpu/at91-common/*    -> arch/arm/mach-at91/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>

9 files changed, 0 insertions, 742 deletions

diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 409e6f5651b..6dbca26ceb4 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -40,7 +40,6 @@ endif
 
 obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
 obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/
-obj-$(CONFIG_AT91FAMILY) += at91/
 obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
 obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
 obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile
deleted file mode 100644
index f4f35a4bc19..00000000000
--- a/arch/arm/cpu/armv7/at91/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2013
-# Bo Shen <voice.shen@atmel.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o
-obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o
-obj-y += clock.o
-obj-y += cpu.o
-obj-y += reset.o
-obj-y += timer.o
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
deleted file mode 100644
index 0bf453eff57..00000000000
--- a/arch/arm/cpu/armv7/at91/clock.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-
-#if !defined(CONFIG_AT91FAMILY)
-# error You need to define CONFIG_AT91FAMILY in your board config!
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static unsigned long at91_css_to_rate(unsigned long css)
-{
-	switch (css) {
-	case AT91_PMC_MCKR_CSS_SLOW:
-		return CONFIG_SYS_AT91_SLOW_CLOCK;
-	case AT91_PMC_MCKR_CSS_MAIN:
-		return gd->arch.main_clk_rate_hz;
-	case AT91_PMC_MCKR_CSS_PLLA:
-		return gd->arch.plla_rate_hz;
-	}
-
-	return 0;
-}
-
-static u32 at91_pll_rate(u32 freq, u32 reg)
-{
-	unsigned mul, div;
-
-	div = reg & 0xff;
-	mul = (reg >> 18) & 0x7f;
-	if (div && mul) {
-		freq /= div;
-		freq *= mul + 1;
-	} else {
-		freq = 0;
-	}
-
-	return freq;
-}
-
-int at91_clock_init(unsigned long main_clock)
-{
-	unsigned freq, mckr;
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
-	unsigned tmp;
-	/*
-	 * When the bootloader initialized the main oscillator correctly,
-	 * there's no problem using the cycle counter.  But if it didn't,
-	 * or when using oscillator bypass mode, we must be told the speed
-	 * of the main clock.
-	 */
-	if (!main_clock) {
-		do {
-			tmp = readl(&pmc->mcfr);
-		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
-		tmp &= AT91_PMC_MCFR_MAINF_MASK;
-		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
-	}
-#endif
-	gd->arch.main_clk_rate_hz = main_clock;
-
-	/* report if PLLA is more than mildly overclocked */
-	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
-
-	/*
-	 * MCK and CPU derive from one of those primary clocks.
-	 * For now, assume this parentage won't change.
-	 */
-	mckr = readl(&pmc->mckr);
-
-	/* plla divisor by 2 */
-	if (mckr & (1 << 12))
-		gd->arch.plla_rate_hz >>= 1;
-
-	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
-	freq = gd->arch.mck_rate_hz;
-
-	/* prescale */
-	freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
-
-	switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
-	case AT91_PMC_MCKR_MDIV_2:
-		gd->arch.mck_rate_hz = freq / 2;
-		break;
-	case AT91_PMC_MCKR_MDIV_3:
-		gd->arch.mck_rate_hz = freq / 3;
-		break;
-	case AT91_PMC_MCKR_MDIV_4:
-		gd->arch.mck_rate_hz = freq / 4;
-		break;
-	default:
-		break;
-	}
-
-	gd->arch.cpu_clk_rate_hz = freq;
-
-	return 0;
-}
-
-void at91_plla_init(u32 pllar)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	writel(pllar, &pmc->pllar);
-	while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
-		;
-}
-
-void at91_mck_init(u32 mckr)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	u32 tmp;
-
-	tmp = readl(&pmc->mckr);
-	tmp &= ~(AT91_PMC_MCKR_CSS_MASK  |
-		 AT91_PMC_MCKR_PRES_MASK |
-		 AT91_PMC_MCKR_MDIV_MASK |
-		 AT91_PMC_MCKR_PLLADIV_2);
-#ifdef CPU_HAS_H32MXDIV
-	tmp &= ~AT91_PMC_MCKR_H32MXDIV;
-#endif
-
-	tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK  |
-		       AT91_PMC_MCKR_PRES_MASK |
-		       AT91_PMC_MCKR_MDIV_MASK |
-		       AT91_PMC_MCKR_PLLADIV_2);
-#ifdef CPU_HAS_H32MXDIV
-	tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
-#endif
-
-	writel(tmp, &pmc->mckr);
-
-	while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
-		;
-}
-
-void at91_periph_clk_enable(int id)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	u32 regval;
-
-	if (id > AT91_PMC_PCR_PID_MASK)
-		return;
-
-	regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id;
-
-	writel(regval, &pmc->pcr);
-}
-
-void at91_periph_clk_disable(int id)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	u32 regval;
-
-	if (id > AT91_PMC_PCR_PID_MASK)
-		return;
-
-	regval = AT91_PMC_PCR_CMD_WRITE | id;
-
-	writel(regval, &pmc->pcr);
-}
diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
deleted file mode 100644
index db6030880fb..00000000000
--- a/arch/arm/cpu/armv7/at91/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-ifndef CONFIG_SPL_BUILD
-ALL-y	+= u-boot.img
-endif
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
deleted file mode 100644
index 8d86f97e3da..00000000000
--- a/arch/arm/cpu/armv7/at91/cpu.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2010
- * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
- * (C) Copyright 2009
- * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- * (C) Copyright 2013
- * Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_dbu.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pit.h>
-#include <asm/arch/at91_gpbr.h>
-#include <asm/arch/clk.h>
-
-#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
-#define CONFIG_SYS_AT91_MAIN_CLOCK 0
-#endif
-
-int arch_cpu_init(void)
-{
-	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
-}
-
-void arch_preboot_os(void)
-{
-	ulong cpiv;
-	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
-
-	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
-
-	/*
-	 * Disable PITC
-	 * Add 0x1000 to current counter to stop it faster
-	 * without waiting for wrapping back to 0
-	 */
-	writel(cpiv + 0x1000, &pit->mr);
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	char buf[32];
-
-	printf("CPU: %s\n", get_cpu_name());
-	printf("Crystal frequency: %8s MHz\n",
-	       strmhz(buf, get_main_clk_rate()));
-	printf("CPU clock        : %8s MHz\n",
-	       strmhz(buf, get_cpu_clk_rate()));
-	printf("Master clock     : %8s MHz\n",
-	       strmhz(buf, get_mck_clk_rate()));
-
-	return 0;
-}
-#endif
-
-void enable_caches(void)
-{
-	icache_enable();
-	dcache_enable();
-}
-
-unsigned int get_chip_id(void)
-{
-	return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK;
-}
-
-unsigned int get_extension_chip_id(void)
-{
-	return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID);
-}
diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c
deleted file mode 100644
index b30e79b60ad..00000000000
--- a/arch/arm/cpu/armv7/at91/reset.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2013
- * Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_rstc.h>
-
-/* Reset the cpu by telling the reset controller to do so */
-void reset_cpu(ulong ignored)
-{
-	at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
-
-	writel(AT91_RSTC_KEY
-		| AT91_RSTC_CR_PROCRST	/* Processor Reset */
-		| AT91_RSTC_CR_PERRST	/* Peripheral Reset */
-#ifdef CONFIG_AT91RESET_EXTRST
-		| AT91_RSTC_CR_EXTRST	/* External Reset (assert nRST pin) */
-#endif
-		, &rstc->cr);
-	/* never reached */
-	do { } while (1);
-}
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
deleted file mode 100644
index 78ecfc882a8..00000000000
--- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (C) 2012-2013 Atmel Corporation
- * Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/sama5d3.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-
-unsigned int has_emac()
-{
-	return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36();
-}
-
-unsigned int has_gmac()
-{
-	return !cpu_is_sama5d31();
-}
-
-unsigned int has_lcdc()
-{
-	return !cpu_is_sama5d35();
-}
-
-char *get_cpu_name()
-{
-	unsigned int extension_id = get_extension_chip_id();
-
-	if (cpu_is_sama5d3())
-		switch (extension_id) {
-		case ARCH_EXID_SAMA5D31:
-			return "SAMA5D31";
-		case ARCH_EXID_SAMA5D33:
-			return "SAMA5D33";
-		case ARCH_EXID_SAMA5D34:
-			return "SAMA5D34";
-		case ARCH_EXID_SAMA5D35:
-			return "SAMA5D35";
-		case ARCH_EXID_SAMA5D36:
-			return "SAMA5D36";
-		default:
-			return "Unknown CPU type";
-		}
-	else
-		return "Unknown CPU type";
-}
-
-void at91_serial0_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTD, 18, 1);	/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTD, 17, 0);	/* RXD0 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_USART0);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTB, 29, 1);	/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 28, 0);	/* RXD1 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_USART1);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_set_b_periph(AT91_PIO_PORTE, 26, 1);	/* TXD2 */
-	at91_set_b_periph(AT91_PIO_PORTE, 25, 0);	/* RXD2 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_USART2);
-}
-
-void at91_seriald_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTB, 31, 1);	/* DTXD */
-	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* DRXD */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_DBGU);
-}
-
-#if defined(CONFIG_ATMEL_SPI)
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_set_a_periph(AT91_PIO_PORTD, 10, 0);       /* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTD, 11, 0);       /* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTD, 12, 0);       /* SPI0_SPCK */
-
-	if (cs_mask & (1 << 0))
-		at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
-	if (cs_mask & (1 << 1))
-		at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
-	if (cs_mask & (1 << 2))
-		at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
-	if (cs_mask & (1 << 3))
-		at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-#endif
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-void at91_mci_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTD, 0, 0);	/* MCI0 CMD */
-	at91_set_a_periph(AT91_PIO_PORTD, 1, 0);	/* MCI0 DA0 */
-	at91_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* MCI0 DA1 */
-	at91_set_a_periph(AT91_PIO_PORTD, 3, 0);        /* MCI0 DA2 */
-	at91_set_a_periph(AT91_PIO_PORTD, 4, 0);        /* MCI0 DA3 */
-#ifdef CONFIG_ATMEL_MCI_8BIT
-	at91_set_a_periph(AT91_PIO_PORTD, 5, 0);        /* MCI0 DA4 */
-	at91_set_a_periph(AT91_PIO_PORTD, 6, 0);        /* MCI0 DA5 */
-	at91_set_a_periph(AT91_PIO_PORTD, 7, 0);        /* MCI0 DA6 */
-	at91_set_a_periph(AT91_PIO_PORTD, 8, 0);        /* MCI0 DA7 */
-#endif
-	at91_set_a_periph(AT91_PIO_PORTD, 9, 0);        /* MCI0 CLK */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_MCI0);
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* ETXCK_EREFCK */
-	at91_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* ERXDV */
-	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* ERX0 */
-	at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* ERX1 */
-	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* ERXER */
-	at91_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* ETXEN */
-	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* ETX0 */
-	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* ETX1 */
-	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* EMDIO */
-	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* EMDC */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_EMAC);
-}
-
-void at91_gmac_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* GTX0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* GTX1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* GTX2 */
-	at91_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* GTX3 */
-	at91_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* GRX0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* GRX1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* GRX2 */
-	at91_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* GRX3 */
-	at91_set_a_periph(AT91_PIO_PORTB, 8, 0);	/* GTXCK */
-	at91_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* GTXEN */
-
-	at91_set_a_periph(AT91_PIO_PORTB, 11, 0);	/* GRXCK */
-	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* GRXER */
-
-	at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* GMDC */
-	at91_set_a_periph(AT91_PIO_PORTB, 17, 0);	/* GMDIO */
-	at91_set_a_periph(AT91_PIO_PORTB, 18, 0);	/* G125CK */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_GMAC);
-}
-#endif
-
-#ifdef CONFIG_LCD
-void at91_lcd_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTA, 24, 0);	/* LCDPWM */
-	at91_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* LCDDISP */
-	at91_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* LCDVSYNC */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* LCDHSYNC */
-	at91_set_a_periph(AT91_PIO_PORTA, 28, 0);	/* LCDDOTCK */
-	at91_set_a_periph(AT91_PIO_PORTA, 29, 0);	/* LCDDEN */
-
-	/* The lower 16-bit of LCD only available on Port A */
-	at91_set_a_periph(AT91_PIO_PORTA,  0, 0);	/* LCDD0 */
-	at91_set_a_periph(AT91_PIO_PORTA,  1, 0);	/* LCDD1 */
-	at91_set_a_periph(AT91_PIO_PORTA,  2, 0);	/* LCDD2 */
-	at91_set_a_periph(AT91_PIO_PORTA,  3, 0);	/* LCDD3 */
-	at91_set_a_periph(AT91_PIO_PORTA,  4, 0);	/* LCDD4 */
-	at91_set_a_periph(AT91_PIO_PORTA,  5, 0);	/* LCDD5 */
-	at91_set_a_periph(AT91_PIO_PORTA,  6, 0);	/* LCDD6 */
-	at91_set_a_periph(AT91_PIO_PORTA,  7, 0);	/* LCDD7 */
-	at91_set_a_periph(AT91_PIO_PORTA,  8, 0);	/* LCDD8 */
-	at91_set_a_periph(AT91_PIO_PORTA,  9, 0);	/* LCDD9 */
-	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* LCDD10 */
-	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* LCDD11 */
-	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* LCDD12 */
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* LCDD13 */
-	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* LCDD14 */
-	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* LCDD15 */
-
-	/* Enable clock */
-	at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-void at91_udp_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/* Enable UPLL clock */
-	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
-	/* Enable UDPHS clock */
-	at91_periph_clk_enable(ATMEL_ID_UDPHS);
-}
-#endif
diff --git a/arch/arm/cpu/armv7/at91/sama5d4_devices.c b/arch/arm/cpu/armv7/at91/sama5d4_devices.c
deleted file mode 100644
index ef39cb7e089..00000000000
--- a/arch/arm/cpu/armv7/at91/sama5d4_devices.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (C) 2014 Atmel
- *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/sama5_matrix.h>
-#include <asm/arch/sama5_sfr.h>
-#include <asm/arch/sama5d4.h>
-
-char *get_cpu_name()
-{
-	unsigned int extension_id = get_extension_chip_id();
-
-	if (cpu_is_sama5d4())
-		switch (extension_id) {
-		case ARCH_EXID_SAMA5D41:
-			return "SAMA5D41";
-		case ARCH_EXID_SAMA5D42:
-			return "SAMA5D42";
-		case ARCH_EXID_SAMA5D43:
-			return "SAMA5D43";
-		case ARCH_EXID_SAMA5D44:
-			return "SAMA5D44";
-		default:
-			return "Unknown CPU type";
-		}
-	else
-		return "Unknown CPU type";
-}
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-void at91_udp_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-	/* Enable UPLL clock */
-	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
-	/* Enable UDPHS clock */
-	at91_periph_clk_enable(ATMEL_ID_UDPHS);
-}
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-void matrix_init(void)
-{
-	struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
-	struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
-	int i;
-
-	/* Disable the write protect */
-	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
-	writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
-
-	/* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
-	for (i = 4; i <= 10; i++) {
-		writel(0x000f0f0f, &h64mx->ssr[i]);
-		writel(0x0000ffff, &h64mx->sassr[i]);
-		writel(0x0000000f, &h64mx->srtsr[i]);
-	}
-
-	/* CS3 */
-	writel(0x00c0c0c0, &h32mx->ssr[3]);
-	writel(0xff000000, &h32mx->sassr[3]);
-	writel(0xff000000, &h32mx->srtsr[3]);
-
-	/* NFC SRAM */
-	writel(0x00010101, &h32mx->ssr[4]);
-	writel(0x00000001, &h32mx->sassr[4]);
-	writel(0x00000001, &h32mx->srtsr[4]);
-
-	/* Enable the write protect */
-	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
-	writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
-}
-
-void redirect_int_from_saic_to_aic(void)
-{
-	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
-	u32 key32;
-
-	if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) {
-		key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY;
-		writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir);
-	}
-}
-#endif
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c
deleted file mode 100644
index 19bf80ba7eb..00000000000
--- a/arch/arm/cpu/armv7/at91/timer.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2013
- * Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pit.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-#include <div64.h>
-
-#if !defined(CONFIG_AT91FAMILY)
-# error You need to define CONFIG_AT91FAMILY in your board config!
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * We're using the SAMA5D3x PITC in 32 bit mode, by
- * setting the 20 bit counter period to its maximum (0xfffff).
- * (See the relevant data sheets to understand that this really works)
- *
- * We do also mimic the typical powerpc way of incrementing
- * two 32 bit registers called tbl and tbu.
- *
- * Those registers increment at 1/16 the main clock rate.
- */
-
-#define TIMER_LOAD_VAL	0xfffff
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, gd->arch.timer_rate_hz);
-
-	return tick;
-}
-
-static inline unsigned long long usec_to_tick(unsigned long long usec)
-{
-	usec *= gd->arch.timer_rate_hz;
-	do_div(usec, 1000000);
-
-	return usec;
-}
-
-/*
- * Use the PITC in full 32 bit incrementing mode
- */
-int timer_init(void)
-{
-	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
-
-	/* Enable PITC Clock */
-	at91_periph_clk_enable(ATMEL_ID_PIT);
-
-	/* Enable PITC */
-	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
-
-	gd->arch.timer_rate_hz = get_pit_clk_rate() / 16;
-
-	gd->arch.tbu = 0;
-	gd->arch.tbl = 0;
-
-	return 0;
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
-	at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
-
-	ulong now = readl(&pit->piir);
-
-	/* increment tbu if tbl has rolled over */
-	if (now < gd->arch.tbl)
-		gd->arch.tbu++;
-	gd->arch.tbl = now;
-	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long start;
-	ulong tmo;
-
-	start = get_ticks();		/* get current timestamp */
-	tmo = usec_to_tick(usec);	/* convert usecs to ticks */
-	while ((get_ticks() - start) < tmo)
-		;			/* loop till time has passed */
-}
-
-/*
- * get_timer(base) can be used to check for timeouts or
- * to measure elasped time relative to an event:
- *
- * ulong start_time = get_timer(0) sets start_time to the current
- * time value.
- * get_timer(start_time) returns the time elapsed since then.
- *
- * The time is used in CONFIG_SYS_HZ units!
- */
-ulong get_timer(ulong base)
-{
-	return tick_to_time(get_ticks()) - base;
-}
-
-/*
- * Return the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return gd->arch.timer_rate_hz;
-}