arm: lpc32xx: move SoC to mach-lpc32xx

Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC)
move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to
arch/arm/mach-lpc32xx.

Following the checklist from
commit 01f14456306c ("ARM: prepare for moving SoC sources into mach-*"):

    [1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx
    [2] add machine entry to arch/arm/Makefile
    [3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile
    [4] fix the Kconfig file path in arch/arm/Kconfig
    [5] (no MAINTAINERS update)

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>

9 files changed, 0 insertions, 588 deletions

diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index b051025bb0a..af63d5cc5ef 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -13,7 +13,6 @@ endif
 endif
 
 obj-$(CONFIG_ARMADA100) += armada100/
-obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
 obj-$(CONFIG_MX25) += mx25/
 obj-$(CONFIG_MX27) += mx27/
 obj-$(if $(filter mxs,$(SOC)),y) += mxs/
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Kconfig b/arch/arm/cpu/arm926ejs/lpc32xx/Kconfig
deleted file mode 100644
index 986ad738ac1..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_LPC32XX
-
-config SYS_SOC
-	default "lpc32xx"
-
-choice
-	prompt "NXP LPC32xx board select"
-
-config TARGET_DEVKIT3250
-	bool "Timll DevKit3250"
-
-config TARGET_WORK_92105
-	bool "Work Microwave Work_92105"
-
-endchoice
-
-source "board/timll/devkit3250/Kconfig"
-source "board/work-microwave/work_92105/Kconfig"
-
-endif
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
deleted file mode 100644
index 6303570beea..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y   = cpu.o clk.o devices.o timer.o
-
-obj-$(CONFIG_SPL_BUILD) += dram.o lowlevel_init.o
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c
deleted file mode 100644
index cb2344d79fe..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <div64.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clk.h>
-#include <asm/io.h>
-
-static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
-
-unsigned int get_sys_clk_rate(void)
-{
-	if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
-		return RTC_CLK_FREQUENCY * 397;
-	else
-		return OSC_CLK_FREQUENCY;
-}
-
-unsigned int get_hclk_pll_rate(void)
-{
-	unsigned long long fin, fref, fcco, fout;
-	u32 val, m_div, n_div, p_div;
-
-	/*
-	 * Valid frequency ranges:
-	 *     1 * 10^6 <=  Fin <=  20 * 10^6
-	 *     1 * 10^6 <= Fref <=  27 * 10^6
-	 *   156 * 10^6 <= Fcco <= 320 * 10^6
-	 */
-
-	fref = fin = get_sys_clk_rate();
-	if (fin > 20000000ULL || fin < 1000000ULL)
-		return 0;
-
-	val = readl(&clk->hclkpll_ctrl);
-	m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
-	n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
-	if (val & CLK_HCLK_PLL_DIRECT)
-		p_div = 0;
-	else
-		p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
-	p_div = 1 << p_div;
-
-	if (val & CLK_HCLK_PLL_BYPASS) {
-		do_div(fin, p_div);
-		return fin;
-	}
-
-	do_div(fref, n_div);
-	if (fref > 27000000ULL || fref < 1000000ULL)
-		return 0;
-
-	fcco = fref * m_div;
-	fout = fcco;
-	if (val & CLK_HCLK_PLL_FEEDBACK)
-		fcco *= p_div;
-	else
-		do_div(fout, p_div);
-
-	if (fcco > 320000000ULL || fcco < 156000000ULL)
-		return 0;
-
-	return fout;
-}
-
-unsigned int get_hclk_clk_div(void)
-{
-	u32 val;
-
-	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
-
-	return 1 << val;
-}
-
-unsigned int get_hclk_clk_rate(void)
-{
-	return get_hclk_pll_rate() / get_hclk_clk_div();
-}
-
-unsigned int get_periph_clk_div(void)
-{
-	u32 val;
-
-	val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
-
-	return (val >> 2) + 1;
-}
-
-unsigned int get_periph_clk_rate(void)
-{
-	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
-		return get_sys_clk_rate();
-
-	return get_hclk_pll_rate() / get_periph_clk_div();
-}
-
-unsigned int get_sdram_clk_rate(void)
-{
-	unsigned int src_clk;
-
-	if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
-		return get_sys_clk_rate();
-
-	src_clk = get_hclk_pll_rate();
-
-	if (readl(&clk->sdramclk_ctrl) & CLK_SDRAM_DDR_SEL) {
-		/* using DDR */
-		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_DDRAM_MASK) {
-		case CLK_HCLK_DDRAM_HALF:
-			return src_clk/2;
-		case CLK_HCLK_DDRAM_NOMINAL:
-			return src_clk;
-		default:
-			return 0;
-		}
-	} else {
-		/* using SDR */
-		switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK) {
-		case CLK_HCLK_ARM_PLL_DIV_4:
-			return src_clk/4;
-		case CLK_HCLK_ARM_PLL_DIV_2:
-			return src_clk/2;
-		case CLK_HCLK_ARM_PLL_DIV_1:
-			return src_clk;
-		default:
-			return 0;
-		}
-	}
-}
-
-int get_serial_clock(void)
-{
-	return get_periph_clk_rate();
-}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
deleted file mode 100644
index 4c59a44f7e6..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <netdev.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/wdt.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-
-static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
-static struct wdt_regs  *wdt = (struct wdt_regs *)WDT_BASE;
-
-void reset_cpu(ulong addr)
-{
-	/* Enable watchdog clock */
-	setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
-
-	/* To be compatible with the original U-Boot code:
-	 * addr: - 0: perform hard reset.
-	 *       - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
-	if (addr == 0) {
-		/* Reset pulse length is 13005 peripheral clock frames */
-		writel(13000, &wdt->pulse);
-
-		/* Force WDOG_RESET2 and RESOUT_N signal active */
-		writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
-		       | WDTIM_MCTRL_M_RES2, &wdt->mctrl);
-	} else {
-		/* Force match output active */
-		writel(0x01, &wdt->emr);
-
-		/* Internal reset on match output (no pulse on "RESOUT_N") */
-		writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
-	}
-
-	while (1)
-		/* NOP */;
-}
-
-#if defined(CONFIG_ARCH_CPU_INIT)
-int arch_cpu_init(void)
-{
-	/*
-	 * It might be necessary to flush data cache, if U-Boot is loaded
-	 * from kickstart bootloader, e.g. from S1L loader
-	 */
-	flush_dcache_all();
-
-	return 0;
-}
-#else
-#error "You have to select CONFIG_ARCH_CPU_INIT"
-#endif
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	printf("CPU:   NXP LPC32XX\n");
-	printf("CPU clock:        %uMHz\n", get_hclk_pll_rate() / 1000000);
-	printf("AHB bus clock:    %uMHz\n", get_hclk_clk_rate() / 1000000);
-	printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_LPC32XX_ETH
-int cpu_eth_init(bd_t *bis)
-{
-	lpc32xx_eth_initialize(bis);
-	return 0;
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
deleted file mode 100644
index 7e7646a2e15..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <ns16550.h>
-#include <dm/platform_data/lpc32xx_hsuart.h>
-
-#include <asm/arch/clk.h>
-#include <asm/arch/uart.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-
-static struct clk_pm_regs    *clk  = (struct clk_pm_regs *)CLK_PM_BASE;
-static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
-static struct mux_regs *mux = (struct mux_regs *)MUX_BASE;
-
-void lpc32xx_uart_init(unsigned int uart_id)
-{
-	if (uart_id < 1 || uart_id > 7)
-		return;
-
-	/* Disable loopback mode, if it is set by S1L bootloader */
-	clrbits_le32(&ctrl->loop,
-		     UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
-
-	if (uart_id < 3 || uart_id > 6)
-		return;
-
-	/* Enable UART system clock */
-	setbits_le32(&clk->uartclk_ctrl, CLK_UART(uart_id));
-
-	/* Set UART into autoclock mode */
-	clrsetbits_le32(&ctrl->clkmode,
-			UART_CLKMODE_MASK(uart_id),
-			UART_CLKMODE_AUTO(uart_id));
-
-	/* Bypass pre-divider of UART clock */
-	writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
-	       &clk->u3clk + (uart_id - 3));
-}
-
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
-static const struct ns16550_platdata lpc32xx_uart[] = {
-	{ .base = UART3_BASE, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = UART4_BASE, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = UART5_BASE, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-	{ .base = UART6_BASE, .reg_shift = 2,
-	  .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
-};
-
-#if defined(CONFIG_LPC32XX_HSUART)
-static const struct lpc32xx_hsuart_platdata lpc32xx_hsuart[] = {
-	{ HS_UART1_BASE, },
-	{ HS_UART2_BASE, },
-	{ HS_UART7_BASE, },
-};
-#endif
-
-U_BOOT_DEVICES(lpc32xx_uarts) = {
-#if defined(CONFIG_LPC32XX_HSUART)
-	{ "lpc32xx_hsuart", &lpc32xx_hsuart[0], },
-	{ "lpc32xx_hsuart", &lpc32xx_hsuart[1], },
-#endif
-	{ "ns16550_serial", &lpc32xx_uart[0], },
-	{ "ns16550_serial", &lpc32xx_uart[1], },
-	{ "ns16550_serial", &lpc32xx_uart[2], },
-	{ "ns16550_serial", &lpc32xx_uart[3], },
-#if defined(CONFIG_LPC32XX_HSUART)
-	{ "lpc32xx_hsuart", &lpc32xx_hsuart[2], },
-#endif
-};
-#endif
-
-void lpc32xx_dma_init(void)
-{
-	/* Enable DMA interface */
-	writel(CLK_DMA_ENABLE, &clk->dmaclk_ctrl);
-}
-
-void lpc32xx_mac_init(void)
-{
-	/* Enable MAC interface */
-	writel(CLK_MAC_REG | CLK_MAC_SLAVE | CLK_MAC_MASTER
-#if defined(CONFIG_RMII)
-		| CLK_MAC_RMII,
-#else
-		| CLK_MAC_MII,
-#endif
-		&clk->macclk_ctrl);
-}
-
-void lpc32xx_mlc_nand_init(void)
-{
-	/* Enable NAND interface */
-	writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl);
-}
-
-void lpc32xx_slc_nand_init(void)
-{
-	/* Enable SLC NAND interface */
-	writel(CLK_NAND_SLC | CLK_NAND_SLC_SELECT, &clk->flashclk_ctrl);
-}
-
-void lpc32xx_usb_init(void)
-{
-	/* Do not route the UART 5 Tx/Rx pins to the USB D+ and USB D- pins. */
-	clrbits_le32(&ctrl->ctrl, UART_CTRL_UART5_USB_MODE);
-}
-
-void lpc32xx_i2c_init(unsigned int devnum)
-{
-	/* Enable I2C interface */
-	uint32_t ctrl = readl(&clk->i2cclk_ctrl);
-	if (devnum == 1)
-		ctrl |= CLK_I2C1_ENABLE;
-	if (devnum == 2)
-		ctrl |= CLK_I2C2_ENABLE;
-	writel(ctrl, &clk->i2cclk_ctrl);
-}
-
-U_BOOT_DEVICE(lpc32xx_gpios) = {
-	.name = "gpio_lpc32xx"
-};
-
-/* Mux for SCK0, MISO0, MOSI0. We do not use SSEL0. */
-
-#define P_MUX_SET_SSP0 0x1600
-
-void lpc32xx_ssp_init(void)
-{
-	/* Enable SSP0 interface */
-	writel(CLK_SSP0_ENABLE_CLOCK, &clk->ssp_ctrl);
-	/* Mux SSP0 pins */
-	writel(P_MUX_SET_SSP0, &mux->p_mux_set);
-}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/dram.c b/arch/arm/cpu/arm926ejs/lpc32xx/dram.c
deleted file mode 100644
index 4f975694fd6..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/dram.c
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * LPC32xx dram init
- *
- * (C) Copyright 2014  DENX Software Engineering GmbH
- * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
- *
- * This is called by SPL to gain access to the SDR DRAM.
- *
- * This code runs from SRAM.
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/wdt.h>
-#include <asm/arch/emc.h>
-#include <asm/io.h>
-
-static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
-static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
-
-void ddr_init(struct emc_dram_settings *dram)
-{
-	uint32_t ck;
-
-	/* Enable EMC interface and choose little endian mode */
-	writel(1, &emc->ctrl);
-	writel(0, &emc->config);
-	/* Select maximum EMC Dynamic Memory Refresh Time */
-	writel(0x7FF, &emc->refresh);
-	/* Determine CLK */
-	ck = get_sdram_clk_rate();
-	/* Configure SDRAM */
-	writel(dram->cmddelay, &clk->sdramclk_ctrl);
-	writel(dram->config0, &emc->config0);
-	writel(dram->rascas0, &emc->rascas0);
-	writel(dram->rdconfig, &emc->read_config);
-	/* Set timings */
-	writel((ck / dram->trp) & 0x0000000F, &emc->t_rp);
-	writel((ck / dram->tras) & 0x0000000F, &emc->t_ras);
-	writel((ck / dram->tsrex) & 0x0000007F, &emc->t_srex);
-	writel((ck / dram->twr) & 0x0000000F, &emc->t_wr);
-	writel((ck / dram->trc) & 0x0000001F, &emc->t_rc);
-	writel((ck / dram->trfc) & 0x0000001F, &emc->t_rfc);
-	writel((ck / dram->txsr) & 0x000000FF, &emc->t_xsr);
-	writel(dram->trrd, &emc->t_rrd);
-	writel(dram->tmrd, &emc->t_mrd);
-	writel(dram->tcdlr, &emc->t_cdlr);
-	/* Dynamic refresh */
-	writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
-	udelay(10);
-	/* Force all clocks, enable inverted ck, issue NOP command */
-	writel(0x00000193, &emc->control);
-	udelay(100);
-	/* Keep all clocks enabled, issue a PRECHARGE ALL command */
-	writel(0x00000113, &emc->control);
-	/* Fast dynamic refresh for at least a few SDRAM ck cycles */
-	writel((((128) >> 4) & 0x7FF), &emc->refresh);
-	udelay(10);
-	/* set correct dynamic refresh timing */
-	writel((((ck / dram->refresh) >> 4) & 0x7FF), &emc->refresh);
-	udelay(10);
-	/* set normal mode to CAS=3 */
-	writel(0x00000093, &emc->control);
-	readl(EMC_DYCS0_BASE | dram->mode);
-	/* set extended mode to all zeroes */
-	writel(0x00000093, &emc->control);
-	readl(EMC_DYCS0_BASE | dram->emode);
-	/* stop forcing clocks, keep inverted clock, issue normal mode */
-	writel(0x00000010, &emc->control);
-}
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S b/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
deleted file mode 100644
index d42da2bc567..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/lowlevel_init.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * WORK Microwave work_92105 board low level init
- *
- * (C) Copyright 2014  DENX Software Engineering GmbH
- * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
- *
- * Low level init is called from SPL to set up the clocks.
- * On entry, the LPC3250 is in Direct Run mode with all clocks
- * running at 13 MHz; on exit, ARM clock is 208 MHz, HCLK is
- * 104 MHz and PCLK is 13 MHz.
- *
- * This code must run from SRAM so that the clock changes do
- * not prevent it from executing.
- */
-
-.globl lowlevel_init
-
-lowlevel_init:
-
-	/* Set ARM, HCLK, PCLK dividers for normal mode */
-	ldr	r0, =0x0000003D
-	ldr	r1, =0x40004040
-	str	r0, [r1]
-
-	/* Start HCLK PLL for 208 MHz */
-	ldr	r0, =0x0001401E
-	ldr	r1, =0x40004058
-	str	r0, [r1]
-
-	/* wait for HCLK PLL to lock */
-1:
-	ldr	r0, [r1]
-	ands	r0, r0, #1
-	beq	1b
-
-	/* switch to normal mode */
-	ldr	r1, =0x40004044
-	ldr	r0, [r1]
-	orr	r0, #0x00000004
-	str	r0, [r1]
-
-	/* Return to U-Boot via saved link register */
-	mov	pc, lr
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
deleted file mode 100644
index 3a896d10ca5..00000000000
--- a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
- */
-
-#include <common.h>
-#include <time.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/timer.h>
-#include <asm/io.h>
-
-static struct timer_regs  *timer0 = (struct timer_regs *)TIMER0_BASE;
-static struct timer_regs  *timer1 = (struct timer_regs *)TIMER1_BASE;
-static struct clk_pm_regs *clk    = (struct clk_pm_regs *)CLK_PM_BASE;
-
-static void lpc32xx_timer_clock(u32 bit, int enable)
-{
-	if (enable)
-		setbits_le32(&clk->timclk_ctrl1, bit);
-	else
-		clrbits_le32(&clk->timclk_ctrl1, bit);
-}
-
-static void lpc32xx_timer_reset(struct timer_regs *timer, u32 freq)
-{
-	writel(TIMER_TCR_COUNTER_RESET,   &timer->tcr);
-	writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
-	writel(0, &timer->tc);
-	writel(0, &timer->pr);
-
-	/* Count mode is every rising PCLK edge */
-	writel(TIMER_CTCR_MODE_TIMER, &timer->ctcr);
-
-	/* Set prescale counter value */
-	writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
-
-	/* Ensure that the counter is not reset when matching TC */
-	writel(0,  &timer->mcr);
-}
-
-static void lpc32xx_timer_count(struct timer_regs *timer, int enable)
-{
-	if (enable)
-		writel(TIMER_TCR_COUNTER_ENABLE,  &timer->tcr);
-	else
-		writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
-}
-
-int timer_init(void)
-{
-	lpc32xx_timer_clock(CLK_TIMCLK_TIMER0, 1);
-	lpc32xx_timer_reset(timer0, CONFIG_SYS_HZ);
-	lpc32xx_timer_count(timer0, 1);
-
-	return 0;
-}
-
-ulong get_timer(ulong base)
-{
-	return readl(&timer0->tc) - base;
-}
-
-void __udelay(unsigned long usec)
-{
-	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 1);
-	lpc32xx_timer_reset(timer1, CONFIG_SYS_HZ * 1000);
-	lpc32xx_timer_count(timer1, 1);
-
-	while (readl(&timer1->tc) < usec)
-		/* NOP */;
-
-	lpc32xx_timer_count(timer1, 0);
-	lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 0);
-}
-
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}