diff options
| author | Lokesh Vutla | 2015-06-04 16:42:37 +0530 |
|---|---|---|
| committer | Tom Rini | 2015-06-12 13:02:05 -0400 |
| commit | 71bed1855ff1f0b9702ecedd1ece486ebc915779 (patch) | |
| tree | 3cf6417069442248c69d0f22a39593581d249d64 /arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | |
| parent | eda6fbcc8c715a48c6b19541fed684efa3c49dbb (diff) | |
ARM: DRA7: Add support for manual mode configuration
In addition to the regular mux configuration, certain pins of DRA7
require to have "manual mode" also programmed, when predefined
delay characteristics cannot be used for the interface.
struct iodelay_cfg_entry is introduced for populating
manual mode IO timings.
For configuring manual mode, along with the normal pad
configuration do the following steps:
- Select MODESELECT field of each assocaited PAD.
CTRL_CORE_PAD_XXX[8]:MODESELECT = 1(Enable MANUAL_MODE macro along with mux)
- Populate A_DELAY, G_DELAY values that are specified in DATA MANUAL.
And pass the offset of the CFG_XXX register in iodelay_cfg_entry.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Diffstat (limited to 'arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h')
| -rw-r--r-- | arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h | 27 |
1 files changed, 26 insertions, 1 deletions
diff --git a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h index a924629a35d..2f53d85283b 100644 --- a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h +++ b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h @@ -35,6 +35,14 @@ #define CFG_IODELAY_UNLOCK_KEY 0x0000AAAA #define CFG_IODELAY_LOCK_KEY 0x0000AAAB +/* CONFIG_REG_3/4 */ +#define CFG_REG_3_OFFSET 0x18 +#define CFG_REG_4_OFFSET 0x1C +#define CFG_REG_DLY_CNT_SHIFT 16 +#define CFG_REG_DLY_CNT_MASK (0xFFFF << 16) +#define CFG_REG_REF_CNT_SHIFT 0 +#define CFG_REG_REF_CNT_MASK (0xFFFF << 0) + /* CTRL_CORE_SMA_SW_0 */ #define CTRL_ISOLATE_SHIFT 2 #define CTRL_ISOLATE_MASK (1 << 2) @@ -53,6 +61,23 @@ #define ERR_DEISOLATE_IO 0x2 #define ERR_ISOLATE_IO 0x4 #define ERR_UPDATE_DELAY 0x8 +#define ERR_CPDE 0x3 +#define ERR_FPDE 0x5 + +/* CFG_XXX */ +#define CFG_X_SIGNATURE_SHIFT 12 +#define CFG_X_SIGNATURE_MASK (0x3F << 12) +#define CFG_X_LOCK_SHIFT 10 +#define CFG_X_LOCK_MASK (0x1 << 10) +#define CFG_X_COARSE_DLY_SHIFT 5 +#define CFG_X_COARSE_DLY_MASK (0x1F << 5) +#define CFG_X_FINE_DLY_SHIFT 0 +#define CFG_X_FINE_DLY_MASK (0x1F << 0) +#define CFG_X_SIGNATURE 0x29 +#define CFG_X_LOCK 1 + +void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, + struct iodelay_cfg_entry const *iodelay, + int niodelays); -void __recalibrate_iodelay(struct pad_conf_entry const *array, int npads); #endif |