diff options
| author | Tom Rini | 2022-11-16 13:10:41 -0500 |
|---|---|---|
| committer | Tom Rini | 2022-12-05 16:06:08 -0500 |
| commit | 65cc0e2a65d2c9f107b2f42db6396d9ade6c5ad8 (patch) | |
| tree | e1b9902c5257875fc5fe8243e1e759594f90beed /arch/arm/mach-imx | |
| parent | a322afc9f9b69dd52a9bc72937cd5adc18ea55c7 (diff) | |
global: Move remaining CONFIG_SYS_* to CFG_SYS_*
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch/arm/mach-imx')
| -rw-r--r-- | arch/arm/mach-imx/image-container.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-imx/mx5/lowlevel_init.S | 10 |
2 files changed, 9 insertions, 9 deletions
diff --git a/arch/arm/mach-imx/image-container.c b/arch/arm/mach-imx/image-container.c index 0e767864822..06ee608c4a4 100644 --- a/arch/arm/mach-imx/image-container.c +++ b/arch/arm/mach-imx/image-container.c @@ -248,13 +248,13 @@ unsigned long spl_nor_get_uboot_base(void) int end; /* Calculate the image set end, - * if it is less than CONFIG_SYS_UBOOT_BASE(0x8281000), - * we use CONFIG_SYS_UBOOT_BASE + * if it is less than CFG_SYS_UBOOT_BASE(0x8281000), + * we use CFG_SYS_UBOOT_BASE * Otherwise, use the calculated address */ end = get_imageset_end((void *)NULL, QSPI_NOR_DEV); - if (end <= CONFIG_SYS_UBOOT_BASE) - end = CONFIG_SYS_UBOOT_BASE; + if (end <= CFG_SYS_UBOOT_BASE) + end = CFG_SYS_UBOOT_BASE; else end = ROUND(end, SZ_1K); diff --git a/arch/arm/mach-imx/mx5/lowlevel_init.S b/arch/arm/mach-imx/mx5/lowlevel_init.S index b42cc3e9e43..6ec38dcfa4e 100644 --- a/arch/arm/mach-imx/mx5/lowlevel_init.S +++ b/arch/arm/mach-imx/mx5/lowlevel_init.S @@ -205,7 +205,7 @@ setup_pll_func: /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR - ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000010C0 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] @@ -215,7 +215,7 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR ldr r1, =0x19239145 str r1, [r0, #CLKCTL_CBCDR] - ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C0 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] setup_pll PLL3_BASE_ADDR, 216 @@ -240,10 +240,10 @@ setup_pll_func: /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ - ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C2 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ - ldr r1, =CONFIG_SYS_CLKTL_CBCDR + ldr r1, =CFG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] /* Restore the default values in the Gate registers */ @@ -378,7 +378,7 @@ ENTRY(lowlevel_init) mov r10, lr mov r4, #0 /* Fix R4 to 0 */ -#if defined(CONFIG_SYS_MAIN_PWR_ON) +#if defined(CFG_SYS_MAIN_PWR_ON) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #1 << 23 |