board: stm32f429-disco: switch to DM STM32 clock driver

Use available DM clk_stm32f.c driver instead of dedicated
mach-stm32/stm32f4/clock.c.

Migrate periph_clock defines from stm32_periph.h directly in
CLK driver. These periph_clock defines will be removed when STMMAC,
TIMER2 and SYSCFG drivers will support DM CLK.

Enable also CLK flag.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

2 files changed, 1 insertions, 259 deletions

diff --git a/arch/arm/mach-stm32/stm32f4/Makefile b/arch/arm/mach-stm32/stm32f4/Makefile
index 63db8200300..86c81bbe445 100644
--- a/arch/arm/mach-stm32/stm32f4/Makefile
+++ b/arch/arm/mach-stm32/stm32f4/Makefile
@@ -8,4 +8,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += clock.o timer.o
+obj-y += timer.o
diff --git a/arch/arm/mach-stm32/stm32f4/clock.c b/arch/arm/mach-stm32/stm32f4/clock.c
deleted file mode 100644
index 774591d6a59..00000000000
--- a/arch/arm/mach-stm32/stm32f4/clock.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * (C) Copyright 2015
- * Kamil Lulko, <kamil.lulko@gmail.com>
- *
- * (C) Copyright 2014
- * STMicroelectronics
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <stm32_rcc.h>
-#include <asm/io.h>
-#include <asm/arch/stm32.h>
-#include <asm/arch/stm32_periph.h>
-
-#define RCC_CR_HSION		(1 << 0)
-#define RCC_CR_HSEON		(1 << 16)
-#define RCC_CR_HSERDY		(1 << 17)
-#define RCC_CR_HSEBYP		(1 << 18)
-#define RCC_CR_CSSON		(1 << 19)
-#define RCC_CR_PLLON		(1 << 24)
-#define RCC_CR_PLLRDY		(1 << 25)
-
-#define RCC_PLLCFGR_PLLM_MASK	0x3F
-#define RCC_PLLCFGR_PLLN_MASK	0x7FC0
-#define RCC_PLLCFGR_PLLP_MASK	0x30000
-#define RCC_PLLCFGR_PLLQ_MASK	0xF000000
-#define RCC_PLLCFGR_PLLSRC	(1 << 22)
-#define RCC_PLLCFGR_PLLN_SHIFT	6
-#define RCC_PLLCFGR_PLLP_SHIFT	16
-#define RCC_PLLCFGR_PLLQ_SHIFT	24
-
-#define RCC_CFGR_AHB_PSC_MASK	0xF0
-#define RCC_CFGR_APB1_PSC_MASK	0x1C00
-#define RCC_CFGR_APB2_PSC_MASK	0xE000
-#define RCC_CFGR_SW0		(1 << 0)
-#define RCC_CFGR_SW1		(1 << 1)
-#define RCC_CFGR_SW_MASK	0x3
-#define RCC_CFGR_SW_HSI		0
-#define RCC_CFGR_SW_HSE		RCC_CFGR_SW0
-#define RCC_CFGR_SW_PLL		RCC_CFGR_SW1
-#define RCC_CFGR_SWS0		(1 << 2)
-#define RCC_CFGR_SWS1		(1 << 3)
-#define RCC_CFGR_SWS_MASK	0xC
-#define RCC_CFGR_SWS_HSI	0
-#define RCC_CFGR_SWS_HSE	RCC_CFGR_SWS0
-#define RCC_CFGR_SWS_PLL	RCC_CFGR_SWS1
-#define RCC_CFGR_HPRE_SHIFT	4
-#define RCC_CFGR_PPRE1_SHIFT	10
-#define RCC_CFGR_PPRE2_SHIFT	13
-
-#define RCC_APB1ENR_PWREN	(1 << 28)
-
-/*
- * RCC USART specific definitions
- */
-#define RCC_ENR_USART1EN		(1 << 4)
-#define RCC_ENR_USART2EN		(1 << 17)
-#define RCC_ENR_USART3EN		(1 << 18)
-#define RCC_ENR_USART6EN		(1 <<  5)
-
-#define PWR_CR_VOS0		(1 << 14)
-#define PWR_CR_VOS1		(1 << 15)
-#define PWR_CR_VOS_MASK		0xC000
-#define PWR_CR_VOS_SCALE_MODE_1	(PWR_CR_VOS0 | PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_2	(PWR_CR_VOS1)
-#define PWR_CR_VOS_SCALE_MODE_3	(PWR_CR_VOS0)
-
-/*
- * RCC GPIO specific definitions
- */
-#define RCC_ENR_GPIO_A_EN	(1 << 0)
-#define RCC_ENR_GPIO_B_EN	(1 << 1)
-#define RCC_ENR_GPIO_C_EN	(1 << 2)
-#define RCC_ENR_GPIO_D_EN	(1 << 3)
-#define RCC_ENR_GPIO_E_EN	(1 << 4)
-#define RCC_ENR_GPIO_F_EN	(1 << 5)
-#define RCC_ENR_GPIO_G_EN	(1 << 6)
-#define RCC_ENR_GPIO_H_EN	(1 << 7)
-#define RCC_ENR_GPIO_I_EN	(1 << 8)
-#define RCC_ENR_GPIO_J_EN	(1 << 9)
-#define RCC_ENR_GPIO_K_EN	(1 << 10)
-
-#if !defined(CONFIG_STM32_HSE_HZ)
-#error "CONFIG_STM32_HSE_HZ not defined!"
-#else
-#if (CONFIG_STM32_HSE_HZ == 8000000)
-#if (CONFIG_SYS_CLK_FREQ == 180000000)
-/* 180 MHz */
-struct pll_psc sys_pll_psc = {
-	.pll_m = 8,
-	.pll_n = 360,
-	.pll_p = 2,
-	.pll_q = 8,
-	.ahb_psc = AHB_PSC_1,
-	.apb1_psc = APB_PSC_4,
-	.apb2_psc = APB_PSC_2
-};
-#else
-/* default 168 MHz */
-struct pll_psc sys_pll_psc = {
-	.pll_m = 8,
-	.pll_n = 336,
-	.pll_p = 2,
-	.pll_q = 7,
-	.ahb_psc = AHB_PSC_1,
-	.apb1_psc = APB_PSC_4,
-	.apb2_psc = APB_PSC_2
-};
-#endif
-#else
-#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
-#endif
-#endif
-
-int configure_clocks(void)
-{
-	/* Reset RCC configuration */
-	setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
-	writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
-	clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
-		| RCC_CR_PLLON));
-	writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
-	clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
-	writel(0, &STM32_RCC->cir); /* Disable all interrupts */
-
-	/* Configure for HSE+PLL operation */
-	setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
-	while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
-		;
-
-	/* Enable high performance mode, System frequency up to 180 MHz */
-	setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
-	writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
-
-	setbits_le32(&STM32_RCC->cfgr, ((
-		sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
-		| (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
-		| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
-
-	writel(sys_pll_psc.pll_m
-		| (sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT)
-		| (((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT)
-		| (sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT),
-		&STM32_RCC->pllcfgr);
-	setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC);
-
-	setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
-
-	while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
-		;
-
-	stm32_flash_latency_cfg(5);
-	clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
-	setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
-
-	while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
-			RCC_CFGR_SWS_PLL)
-		;
-
-	return 0;
-}
-
-unsigned long clock_get(enum clock clck)
-{
-	u32 sysclk = 0;
-	u32 shift = 0;
-	/* Prescaler table lookups for clock computation */
-	u8 ahb_psc_table[16] = {
-		0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
-	};
-	u8 apb_psc_table[8] = {
-		0, 0, 0, 0, 1, 2, 3, 4
-	};
-
-	if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
-			RCC_CFGR_SWS_PLL) {
-		u16 pllm, plln, pllp;
-		pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
-		plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
-			>> RCC_PLLCFGR_PLLN_SHIFT);
-		pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
-			>> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
-		sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
-	}
-
-	switch (clck) {
-	case CLOCK_CORE:
-		return sysclk;
-		break;
-	case CLOCK_AHB:
-		shift = ahb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
-			>> RCC_CFGR_HPRE_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	case CLOCK_APB1:
-		shift = apb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
-			>> RCC_CFGR_PPRE1_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	case CLOCK_APB2:
-		shift = apb_psc_table[(
-			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
-			>> RCC_CFGR_PPRE2_SHIFT)];
-		return sysclk >>= shift;
-		break;
-	default:
-		return 0;
-		break;
-	}
-}
-
-void clock_setup(int peripheral)
-{
-	switch (peripheral) {
-	case USART1_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->apb2enr, RCC_ENR_USART1EN);
-		break;
-	case GPIO_A_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_A_EN);
-		break;
-	case GPIO_B_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_B_EN);
-		break;
-	case GPIO_C_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_C_EN);
-		break;
-	case GPIO_D_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_D_EN);
-		break;
-	case GPIO_E_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_E_EN);
-		break;
-	case GPIO_F_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_F_EN);
-		break;
-	case GPIO_G_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_G_EN);
-		break;
-	case GPIO_H_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_H_EN);
-		break;
-	case GPIO_I_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_I_EN);
-		break;
-	case GPIO_J_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_J_EN);
-		break;
-	case GPIO_K_CLOCK_CFG:
-		setbits_le32(&STM32_RCC->ahb1enr, RCC_ENR_GPIO_K_EN);
-		break;
-	default:
-		break;
-	}
-}