ARM: tegra: move VPR configuration to a later stage

U-boot is responsible for enabling the GPU DT node after all necessary
configuration (VPR setup for T124) is performed. In order to be able to
check whether this configuration has been performed right before booting
the kernel, make it happen during board_init().

Also move VPR configuration into the more generic gpu.c file, which will
also host other GPU-related functions, and let boards specify
individually whether they need VPR setup or not.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

4 files changed, 19 insertions, 9 deletions

diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 0db8ee05bd3..75924ad8480 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -24,9 +24,7 @@ obj-y += pinmux-common.o
 obj-y += powergate.o
 obj-y += xusb-padctl.o
 obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o
-#TCW Fix this to use a common config switch (CONFIG_LOCK_VPR?)
-obj-$(CONFIG_TEGRA124) += vpr.o
-obj-$(CONFIG_TEGRA210) += vpr.o
+obj-$(CONFIG_TEGRA_GPU) += gpu.o
 obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
 
 ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/mach-tegra/ap.c b/arch/arm/mach-tegra/ap.c
index e62dda5a6b2..b4229f4575e 100644
--- a/arch/arm/mach-tegra/ap.c
+++ b/arch/arm/mach-tegra/ap.c
@@ -226,8 +226,5 @@ void s_init(void)
 
 	/* enable SMMU */
 	smmu_enable();
-
-	/* init vpr */
-	config_vpr();
 }
 #endif
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index 41e9341874e..37953cfda8a 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -29,6 +29,7 @@
 #include <asm/arch-tegra/sys_proto.h>
 #include <asm/arch-tegra/uart.h>
 #include <asm/arch-tegra/warmboot.h>
+#include <asm/arch-tegra/gpu.h>
 #ifdef CONFIG_TEGRA_CLOCK_SCALING
 #include <asm/arch/emc.h>
 #endif
@@ -126,6 +127,8 @@ int board_init(void)
 	clock_init();
 	clock_verify();
 
+	config_gpu();
+
 #ifdef CONFIG_TEGRA_SPI
 	pin_mux_spi();
 #endif
diff --git a/arch/arm/mach-tegra/vpr.c b/arch/arm/mach-tegra/gpu.c
index f695811c9b6..b2fa50b5400 100644
--- a/arch/arm/mach-tegra/vpr.c
+++ b/arch/arm/mach-tegra/gpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2014-2015, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -21,8 +21,11 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch/mc.h>
 
-/* Configures VPR.  Right now, all we do is turn it off. */
-void config_vpr(void)
+#include <fdt_support.h>
+
+static bool _configured;
+
+void config_gpu(void)
 {
 	struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
 
@@ -32,4 +35,13 @@ void config_vpr(void)
 	       &mc->mc_video_protect_reg_ctrl);
 	/* read back to ensure the write went through */
 	readl(&mc->mc_video_protect_reg_ctrl);
+
+	debug("configured VPR\n");
+
+	_configured = true;
+}
+
+bool vpr_configured(void)
+{
+	return _configured;
 }