diff options
| author | Johann Neuhauser | 2022-06-30 16:19:48 +0200 |
|---|---|---|
| committer | Patrick Delaunay | 2022-07-12 11:48:15 +0200 |
| commit | 48d9eaf6826a1816c5f9839a564ea6338da609a7 (patch) | |
| tree | 81c43ac08b1f69bff8c1ea1a5406d1f3cf57d9d7 /arch/arm | |
| parent | 257d001cb5a3e3e3a582fddb37478dedb1764811 (diff) | |
arm: dts: stm32mp1: Drop fastboot and stm32prog trigger gpios on DHCOM
PA13 and PA14 are used for USB power control and can't be used
to enforce fastboot or stm32prog mode by pressing a button.
Defining CONFIG_FASTBOOT/CONFIG_CMD_STM32PROG without this patch applied
results in fastboot/stm32prog always starting, because PA13/PA14 are always
low during boot. So drop the wrong trigger gpios definitions.
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index d73967ac1b5..ee747a52bb7 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -27,8 +27,6 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; - st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; - st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>; }; |