arm64: zynqmp: Remove pinctrl settings

This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>

1 files changed, 0 insertions, 288 deletions

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 059d1ffe868..b7c638bc9e5 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -13,7 +13,6 @@
 #include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>
 
 / {
@@ -70,8 +69,6 @@
 
 &can1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_default>;
 };
 
 &dcc {
@@ -114,8 +111,6 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gem3_default>;
 	phy0: phy@21 {
 		reg = <21>;
 		ti,rx-internal-delay = <0x8>;
@@ -126,8 +121,6 @@
 
 &gpio {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_default>;
 };
 
 &gpu {
@@ -137,11 +130,6 @@
 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0_default>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
@@ -391,11 +379,6 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
 	/* PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
@@ -545,269 +528,6 @@
 	};
 };
 
-&pinctrl0 {
-	status = "okay";
-	pinctrl_i2c0_default: i2c0-default {
-		mux {
-			groups = "i2c0_3_grp";
-			function = "i2c0";
-		};
-
-		conf {
-			groups = "i2c0_3_grp";
-			bias-pull-up;
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-	};
-
-	pinctrl_i2c0_gpio: i2c0-gpio {
-		mux {
-			groups = "gpio0_14_grp", "gpio0_15_grp";
-			function = "gpio0";
-		};
-
-		conf {
-			groups = "gpio0_14_grp", "gpio0_15_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-	};
-
-	pinctrl_i2c1_default: i2c1-default {
-		mux {
-			groups = "i2c1_4_grp";
-			function = "i2c1";
-		};
-
-		conf {
-			groups = "i2c1_4_grp";
-			bias-pull-up;
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio {
-		mux {
-			groups = "gpio0_16_grp", "gpio0_17_grp";
-			function = "gpio0";
-		};
-
-		conf {
-			groups = "gpio0_16_grp", "gpio0_17_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-	};
-
-	pinctrl_uart0_default: uart0-default {
-		mux {
-			groups = "uart0_4_grp";
-			function = "uart0";
-		};
-
-		conf {
-			groups = "uart0_4_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-rx {
-			pins = "MIO18";
-			bias-high-impedance;
-		};
-
-		conf-tx {
-			pins = "MIO19";
-			bias-disable;
-		};
-	};
-
-	pinctrl_uart1_default: uart1-default {
-		mux {
-			groups = "uart1_5_grp";
-			function = "uart1";
-		};
-
-		conf {
-			groups = "uart1_5_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-rx {
-			pins = "MIO21";
-			bias-high-impedance;
-		};
-
-		conf-tx {
-			pins = "MIO20";
-			bias-disable;
-		};
-	};
-
-	pinctrl_usb0_default: usb0-default {
-		mux {
-			groups = "usb0_0_grp";
-			function = "usb0";
-		};
-
-		conf {
-			groups = "usb0_0_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-rx {
-			pins = "MIO52", "MIO53", "MIO55";
-			bias-high-impedance;
-		};
-
-		conf-tx {
-			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
-			       "MIO60", "MIO61", "MIO62", "MIO63";
-			bias-disable;
-		};
-	};
-
-	pinctrl_gem3_default: gem3-default {
-		mux {
-			function = "ethernet3";
-			groups = "ethernet3_0_grp";
-		};
-
-		conf {
-			groups = "ethernet3_0_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-rx {
-			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
-									"MIO75";
-			bias-high-impedance;
-			low-power-disable;
-		};
-
-		conf-tx {
-			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
-									"MIO69";
-			bias-disable;
-			low-power-enable;
-		};
-
-		mux-mdio {
-			function = "mdio3";
-			groups = "mdio3_0_grp";
-		};
-
-		conf-mdio {
-			groups = "mdio3_0_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-			bias-disable;
-		};
-	};
-
-	pinctrl_can1_default: can1-default {
-		mux {
-			function = "can1";
-			groups = "can1_6_grp";
-		};
-
-		conf {
-			groups = "can1_6_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-rx {
-			pins = "MIO25";
-			bias-high-impedance;
-		};
-
-		conf-tx {
-			pins = "MIO24";
-			bias-disable;
-		};
-	};
-
-	pinctrl_sdhci1_default: sdhci1-default {
-		mux {
-			groups = "sdio1_0_grp";
-			function = "sdio1";
-		};
-
-		conf {
-			groups = "sdio1_0_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-			bias-disable;
-		};
-
-		mux-cd {
-			groups = "sdio1_0_cd_grp";
-			function = "sdio1_cd";
-		};
-
-		conf-cd {
-			groups = "sdio1_0_cd_grp";
-			bias-high-impedance;
-			bias-pull-up;
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		mux-wp {
-			groups = "sdio1_0_wp_grp";
-			function = "sdio1_wp";
-		};
-
-		conf-wp {
-			groups = "sdio1_0_wp_grp";
-			bias-high-impedance;
-			bias-pull-up;
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-	};
-
-	pinctrl_gpio_default: gpio-default {
-		mux-sw {
-			function = "gpio0";
-			groups = "gpio0_22_grp", "gpio0_23_grp";
-		};
-
-		conf-sw {
-			groups = "gpio0_22_grp", "gpio0_23_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		mux-msp {
-			function = "gpio0";
-			groups = "gpio0_13_grp", "gpio0_38_grp";
-		};
-
-		conf-msp {
-			groups = "gpio0_13_grp", "gpio0_38_grp";
-			slew-rate = <SLEW_RATE_SLOW>;
-			io-standard = <IO_STANDARD_LVCMOS18>;
-		};
-
-		conf-pull-up {
-			pins = "MIO22", "MIO23";
-			bias-pull-up;
-		};
-
-		conf-pull-none {
-			pins = "MIO13", "MIO38";
-			bias-disable;
-		};
-	};
-};
-
 &pcie {
 	status = "okay";
 };
@@ -864,8 +584,6 @@
 /* SD1 with level shifter */
 &sdhci1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhci1_default>;
 	no-1-8-v;	/* for 1.0 silicon */
 	xlnx,mio_bank = <1>;
 };
@@ -876,21 +594,15 @@
 
 &uart0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb0_default>;
 };
 
 &dwc3_0 {