verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux

Synchronise device trees with linux v6.5-rc1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

8 files changed, 309 insertions, 335 deletions

diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts
index 32f6f2f50c1..0b123a84018 100644
--- a/arch/arm/dts/imx8mm-mx8menlo.dts
+++ b/arch/arm/dts/imx8mm-mx8menlo.dts
@@ -10,6 +10,7 @@
 / {
 	model = "MENLO MX8MM EMBEDDED DEVICE";
 	compatible = "menlo,mx8menlo",
+		     "toradex,verdin-imx8mm-nonwifi",
 		     "toradex,verdin-imx8mm",
 		     "fsl,imx8mm";
 
@@ -250,21 +251,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */
diff --git a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
deleted file mode 100644
index c2a5c2f7b20..00000000000
--- a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/ {
-	sound_card: sound-card {
-		compatible = "simple-audio-card";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,name = "imx8mm-wm8904";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN2L", "Line In Jack",
-			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
-		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
-			"Headphone", "Headphone Jack",
-			"Line", "Line In Jack";
-
-		dailink_master: simple-audio-card,codec {
-			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
-			sound-dai = <&wm8904_1a>;
-		};
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-	};
-};
-
-/* Verdin SPI_1 */
-&ecspi2 {
-	status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
-	status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
-	status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
-	status = "okay";
-};
-
-&hwmon_temp {
-	vs-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
-	status = "okay";
-
-	/* Audio Codec */
-	wm8904_1a: audio-codec@1a {
-		compatible = "wlf,wm8904";
-		AVDD-supply = <&reg_3p3v>;
-		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
-		clock-names = "mclk";
-		CPVDD-supply = <&reg_3p3v>;
-		DBVDD-supply = <&reg_3p3v>;
-		DCVDD-supply = <&reg_3p3v>;
-		MICVDD-supply = <&reg_3p3v>;
-		reg = <0x1a>;
-		#sound-dai-cells = <0>;
-	};
-};
-
-/* Verdin PCIE_1 */
-&pcie0 {
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm1 {
-	status = "okay";
-};
-
-/* Verdin PWM_1 */
-&pwm2 {
-	status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm3 {
-	status = "okay";
-};
-
-/* Verdin I2S_1 */
-&sai2 {
-	status = "okay";
-};
-
-/* Verdin UART_3 */
-&uart1 {
-	status = "okay";
-};
-
-/* Verdin UART_1 */
-&uart2 {
-	status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart3 {
-	status = "okay";
-};
-
-/* Verdin USB_1 */
-&usbotg1 {
-	status = "okay";
-};
-
-/* Verdin USB_2 */
-&usbotg2 {
-	status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/imx8mm-verdin-dev.dtsi b/arch/arm/dts/imx8mm-verdin-dev.dtsi
index 73cc3fafa01..3c4b8ca125e 100644
--- a/arch/arm/dts/imx8mm-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-dev.dtsi
@@ -3,14 +3,13 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mm-verdin-dahlia.dtsi"
-
 / {
 	sound_card: sound-card {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,name = "imx8mm-nau8822";
 		simple-audio-card,routing =
 			"Headphones", "LHP",
@@ -41,27 +40,121 @@
 	};
 };
 
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
 &gpio_expander_21 {
 	status = "okay";
 };
 
 /* Verdin I2C_1 */
 &i2c4 {
+	status = "okay";
+
 	/* Audio Codec */
 	nau8822_1a: audio-codec@1a {
 		compatible = "nuvoton,nau8822";
 		reg = <0x1a>;
+		#sound-dai-cells = <0>;
 	};
 };
 
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
 /* Verdin UART_1, connector X50 through RS485 transceiver */
 &uart2 {
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-active-low;
 	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
 	max-frequency = <100000000>;
+	status = "okay";
 };
diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi
index bcab830c6e9..6f081158714 100644
--- a/arch/arm/dts/imx8mm-verdin.dtsi
+++ b/arch/arm/dts/imx8mm-verdin.dtsi
@@ -3,8 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -56,7 +56,11 @@
 	hdmi_connector: hdmi-connector {
 		compatible = "hdmi-connector";
 		ddc-i2c-bus = <&i2c2>;
+		/* Verdin PWM_3_DSI (SODIMM 19) */
+		hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 		label = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
 		type = "a";
 		status = "disabled";
 	};
@@ -95,9 +99,10 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -134,7 +139,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
@@ -183,15 +188,15 @@
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
 
-		opp-25M {
+		opp-25000000 {
 			opp-hz = /bits/ 64 <25000000>;
 		};
 
-		opp-100M {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 
-		opp-750M {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 		};
 	};
@@ -358,7 +363,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
@@ -598,7 +602,7 @@
 	hdmi_lontium_lt8912: hdmi@48 {
 		compatible = "lontium,lt8912b";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
 		reg = <0x48>;
 		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
@@ -610,7 +614,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio3>;
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -653,9 +657,6 @@
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
 				 <&clk IMX8MM_SYS_PLL2_250M>;
 	assigned-clock-rates = <10000000>, <250000000>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-		 <&clk IMX8MM_CLK_PCIE1_PHY>;
-	clock-names = "pcie", "pcie_aux", "pcie_bus";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
 	/* PCIE_1_RESET# (SODIMM 244) */
@@ -664,6 +665,7 @@
 
 &pcie_phy {
 	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
 	fsl,clkreq-unsupported;
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
 	fsl,tx-deemph-gen1 = <0x2d>;
@@ -739,7 +741,6 @@
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
-	over-current-active-low;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	srp-disable;
@@ -749,7 +750,6 @@
 /* Verdin USB_2 */
 &usbotg2 {
 	dr_mode = "host";
-	over-current-active-low;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	vbus-supply = <&reg_usb_otg2_vbus>;
diff --git a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi b/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
deleted file mode 100644
index 4b8f86f6308..00000000000
--- a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/* TODO: Audio Codec */
-
-&backlight {
-	power-supply = <&reg_3p3v>;
-};
-
-/* Verdin SPI_1 */
-&ecspi1 {
-	status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
-	status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
-	status = "okay";
-};
-
-&eqos {
-	status = "okay";
-};
-
-&flexcan1 {
-	status = "okay";
-};
-
-&flexcan2 {
-	status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
-	status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
-	status = "okay";
-};
-
-&hwmon_temp {
-	vs-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-/* Verdin I2C_2_DSI */
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
-	status = "okay";
-
-	/* TODO: Audio Codec */
-};
-
-/* TODO: Verdin PCIE_1 */
-
-/* Verdin PWM_1 */
-&pwm1 {
-	status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm2 {
-	status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm3 {
-	status = "okay";
-};
-
-&reg_usdhc2_vmmc {
-	vin-supply = <&reg_3p3v>;
-};
-
-/* TODO: Verdin I2S_1 */
-
-/* Verdin UART_1 */
-&uart1 {
-	status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart2 {
-	status = "okay";
-};
-
-/* Verdin UART_3, used as the Linux Console */
-&uart3 {
-	status = "okay";
-};
-
-/* Verdin USB_1 */
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_phy0 {
-	status = "okay";
-};
-
-/* Verdin USB_2 */
-&usb3_1 {
-	status = "okay";
-};
-
-&usb3_phy1 {
-	status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/imx8mp-verdin-dev.dtsi b/arch/arm/dts/imx8mp-verdin-dev.dtsi
index cefabe65b25..bdfdd4c782f 100644
--- a/arch/arm/dts/imx8mp-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-dev.dtsi
@@ -3,8 +3,6 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mp-verdin-dahlia.dtsi"
-
 / {
 	/* TODO: Audio Codec */
 
@@ -12,7 +10,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_ETH";
@@ -21,16 +19,106 @@
 	};
 };
 
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
 &fec {
 	phy-supply = <&reg_eth2phy>;
 	status = "okay";
 };
 
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
 &gpio_expander_21 {
 	status = "okay";
 	vcc-supply = <&reg_1p8v>;
 };
 
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* TODO: Audio Codec */
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
 /* TODO: Verdin I2C_1 with Audio Codec */
 
 /* Verdin UART_1, connector X50 through RS485 transceiver */
@@ -38,9 +126,40 @@
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-active-low;
 	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
 	max-frequency = <100000000>;
+	status = "okay";
 };
diff --git a/arch/arm/dts/imx8mp-verdin-wifi.dtsi b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
index 36289c175e6..ef94f9a57e2 100644
--- a/arch/arm/dts/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
@@ -65,6 +65,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_bt_uart>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
 };
 
 /* On-module Wi-Fi */
diff --git a/arch/arm/dts/imx8mp-verdin.dtsi b/arch/arm/dts/imx8mp-verdin.dtsi
index 7b712d1888e..e9e4fcb562f 100644
--- a/arch/arm/dts/imx8mp-verdin.dtsi
+++ b/arch/arm/dts/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -49,7 +50,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		button-wakeup {
+		key-wakeup {
 			debounce-interval = <10>;
 			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -86,7 +87,7 @@
 		compatible = "regulator-fixed";
 		enable-active-high;
 		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-		off-on-delay = <500000>;
+		off-on-delay-us = <500000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_eth>;
 		regulator-always-on;
@@ -127,7 +128,7 @@
 		enable-active-high;
 		/* Verdin SD_1_PWR_EN (SODIMM 76) */
 		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		off-on-delay = <100000>;
+		off-on-delay-us = <100000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
 		regulator-max-microvolt = <3300000>;
@@ -354,16 +355,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -432,6 +423,16 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };
 
 /* On-module I2C */
@@ -452,7 +453,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x25>;
-		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
 		/*
 		 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
@@ -678,8 +678,8 @@
 		status = "disabled";
 	};
 
-	lvds_ti_sn65dsi83: bridge@2c {
-		compatible = "ti,sn65dsi83";
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
 		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
 		/* Verdin GPIO_10_DSI (SODIMM 21) */
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -712,7 +712,7 @@
 		compatible = "atmel,maxtouch";
 		/*
 		 * Verdin GPIO_9_DSI
-		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
 		 */
 		interrupt-parent = <&gpio4>;
 		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -748,7 +748,20 @@
 	};
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
@@ -806,28 +819,45 @@
 };
 
 /* Verdin USB_1 */
-&usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
 };
 
 &usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
 	adp-disable;
 	dr_mode = "otg";
 	hnp-disable;
 	maximum-speed = "high-speed";
-	over-current-active-low;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_1_id>;
+	role-switch-default-mode = "peripheral";
 	srp-disable;
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+	};
 };
 
 /* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
 &usb3_phy1 {
 	vbus-supply = <&reg_usb2_vbus>;
 };
 
 &usb_dwc3_1 {
-	disable-over-current;
 	dr_mode = "host";
 };
 
@@ -1045,7 +1075,6 @@
 
 	pinctrl_gpio_hog3: gpiohog3grp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
 			/* CSI_1_MCLK */
 			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
 	};
@@ -1220,7 +1249,7 @@
 
 	pinctrl_usb1_vbus: usb1vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x19>;	/* SODIMM 155 */
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
 	};
 
 	/* USB_1_ID */
@@ -1229,9 +1258,15 @@
 			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
 	};
 
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
 	pinctrl_usb2_vbus: usb2vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x19>;	/* SODIMM 185 */
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
 	};
 
 	/* On-module Wi-Fi */