imx8mm-phg: Add board support

Add the board support for the i.MX8MM Cloos PHG board.

This board uses a imx8mm-tqma8mqml SoM from TQ-Group.

imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken
directly from Linux 6.2-rc3.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

5 files changed, 753 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3ecd6a86e95..48de9ab3ca9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -960,6 +960,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mm-kontron-bl.dtb \
 	imx8mm-kontron-bl-osm-s.dtb \
 	imx8mm-mx8menlo.dtb \
+	imx8mm-phg.dtb \
 	imx8mm-venice.dtb \
 	imx8mm-venice-gw71xx-0x.dtb \
 	imx8mm-venice-gw72xx-0x.dtb \
diff --git a/arch/arm/dts/imx8mm-phg-u-boot.dtsi b/arch/arm/dts/imx8mm-phg-u-boot.dtsi
new file mode 100644
index 00000000000..3bf45ef4a64
--- /dev/null
+++ b/arch/arm/dts/imx8mm-phg-u-boot.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&aips4 {
+	u-boot,dm-spl;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+	u-boot,dm-spl;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+};
+
+&gpio4 {
+	u-boot,dm-spl;
+};
+
+&gpio5 {
+	u-boot,dm-spl;
+};
+
+&uart2 {
+	u-boot,dm-spl;
+};
+
+&usbmisc1 {
+	u-boot,dm-spl;
+};
+
+&usbphynop1 {
+	u-boot,dm-spl;
+};
+
+&usbotg1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc2 {
+	u-boot,dm-spl;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+};
+
+&usdhc3 {
+	u-boot,dm-spl;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	/*
+	 * prevents voltage switch warn: driver will switch even at
+	 * fixed voltage
+	 */
+	/delete-property/ vmmc-supply;
+	/delete-property/ vqmmc-supply;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+};
+
+&i2c1 {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25} {
+	u-boot,dm-spl;
+};
+
+&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
+	u-boot,dm-spl;
+};
+
+&pinctrl_i2c1 {
+	u-boot,dm-spl;
+};
+
+&pinctrl_pmic {
+	u-boot,dm-spl;
+};
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx8mm-phg.dts b/arch/arm/dts/imx8mm-phg.dts
new file mode 100644
index 00000000000..e9447738b10
--- /dev/null
+++ b/arch/arm/dts/imx8mm-phg.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx8mm-tqma8mqml.dtsi b/arch/arm/dts/imx8mm-tqma8mqml.dtsi
new file mode 100644
index 00000000000..f649dfacb4b
--- /dev/null
+++ b/arch/arm/dts/imx8mm-tqma8mqml.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
+	compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor-eeprom@1b {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM / VPU */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82>,
+			   <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000004>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x94>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index a0715e80911..64e6b49f46b 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -94,6 +94,13 @@ config TARGET_IMX8MM_MX8MENLO
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
+config TARGET_IMX8MM_PHG
+	bool "i.MX8MM PHG board"
+	select BINMAN
+	select IMX8MM
+	select SUPPORT_SPL
+	select IMX8M_LPDDR4
+
 config TARGET_IMX8MM_VENICE
 	bool "Support Gateworks Venice iMX8M Mini module"
 	select BINMAN
@@ -305,6 +312,7 @@ source "board/advantech/imx8mp_rsb3720a1/Kconfig"
 source "board/beacon/imx8mm/Kconfig"
 source "board/beacon/imx8mn/Kconfig"
 source "board/bsh/imx8mn_smm_s2/Kconfig"
+source "board/cloos/imx8mm_phg/Kconfig"
 source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
 source "board/data_modul/imx8mm_edm_sbc/Kconfig"
 source "board/dhelectronics/dh_imx8mp/Kconfig"