Move lib_$ARCH directories to arch/$ARCH/lib

Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

6 files changed, 887 insertions, 0 deletions

diff --git a/arch/mips/config.mk b/arch/mips/config.mk
new file mode 100644
index 00000000000..aa06761ae35
--- /dev/null
+++ b/arch/mips/config.mk
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CROSS_COMPILE ?= mips_4KC-
+
+STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds
+
+PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
+
+#
+# From Linux arch/mips/Makefile
+#
+# GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
+# code since it only slows down the whole thing.  At some point we might make
+# use of global pointer optimizations but their use of $28 conflicts with
+# the current pointer optimization.
+#
+# The DECStation requires an ECOFF kernel for remote booting, other MIPS
+# machines may also.  Since BFD is incredibly buggy with respect to
+# crossformat linking we rely on the elf2ecoff tool for format conversion.
+#
+# cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+# cflags-y			+= -msoft-float
+# LDFLAGS_vmlinux		+= -G 0 -static -n -nostdlib
+# MODFLAGS			+= -mlong-calls
+#
+# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
+# to RAM. $28 is always used as gp.
+#
+PLATFORM_CPPFLAGS		+= -G 0 -mabicalls -fpic
+PLATFORM_CPPFLAGS		+= -msoft-float
+PLATFORM_LDFLAGS		+= -G 0 -static -n -nostdlib
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
new file mode 100644
index 00000000000..7967e5803a3
--- /dev/null
+++ b/arch/mips/lib/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(ARCH).a
+
+SOBJS-y	+=
+
+COBJS-y	+= board.o
+ifeq ($(CONFIG_QEMU_MIPS),y)
+COBJS-y	+= bootm_qemu_mips.o
+else
+COBJS-y	+= bootm.o
+endif
+COBJS-y	+= time.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
new file mode 100644
index 00000000000..b2d113e870a
--- /dev/null
+++ b/arch/mips/lib/board.c
@@ -0,0 +1,436 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <stdio_dev.h>
+#include <timestamp.h>
+#include <version.h>
+#include <net.h>
+#include <environment.h>
+#include <nand.h>
+#include <onenand_uboot.h>
+#include <spi.h>
+
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+      (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+    defined(CONFIG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
+#else
+#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
+#endif
+
+#undef DEBUG
+
+extern int timer_init(void);
+
+extern int incaip_set_cpuclk(void);
+
+extern ulong uboot_end_data;
+extern ulong uboot_end;
+
+ulong monitor_flash_len;
+
+const char version_string[] =
+	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
+
+static char *failed = "*** failed ***\n";
+
+/*
+ * mips_io_port_base is the begin of the address space to which x86 style
+ * I/O ports are mapped.
+ */
+unsigned long mips_io_port_base = -1;
+
+int __board_early_init_f(void)
+{
+	/*
+	 * Nothing to do in this dummy implementation
+	 */
+	return 0;
+}
+int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
+
+
+static int init_func_ram (void)
+{
+#ifdef	CONFIG_BOARD_TYPES
+	int board_type = gd->board_type;
+#else
+	int board_type = 0;	/* use dummy arg */
+#endif
+	puts ("DRAM:  ");
+
+	if ((gd->ram_size = initdram (board_type)) > 0) {
+		print_size (gd->ram_size, "\n");
+		return (0);
+	}
+	puts (failed);
+	return (1);
+}
+
+static int display_banner(void)
+{
+
+	printf ("\n\n%s\n\n", version_string);
+	return (0);
+}
+
+#ifndef CONFIG_SYS_NO_FLASH
+static void display_flash_config(ulong size)
+{
+	puts ("Flash: ");
+	print_size (size, "\n");
+}
+#endif
+
+static int init_baudrate (void)
+{
+	char tmp[64];	/* long enough for environment variables */
+	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+	gd->baudrate = (i > 0)
+			? (int) simple_strtoul (tmp, NULL, 10)
+			: CONFIG_BAUDRATE;
+
+	return (0);
+}
+
+
+/*
+ * Breath some life into the board...
+ *
+ * The first part of initialization is running from Flash memory;
+ * its main purpose is to initialize the RAM so that we
+ * can relocate the monitor code to RAM.
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+	board_early_init_f,
+	timer_init,
+	env_init,		/* initialize environment */
+#ifdef CONFIG_INCA_IP
+	incaip_set_cpuclk,	/* set cpu clock according to environment variable */
+#endif
+	init_baudrate,		/* initialze baudrate settings */
+	serial_init,		/* serial communications setup */
+	console_init_f,
+	display_banner,		/* say that we are here */
+	checkboard,
+	init_func_ram,
+	NULL,
+};
+
+
+void board_init_f(ulong bootflag)
+{
+	gd_t gd_data, *id;
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
+	ulong *s;
+#ifdef CONFIG_PURPLE
+	void copy_code (ulong);
+#endif
+
+	/* Pointer is writable since we allocated a register for it.
+	 */
+	gd = &gd_data;
+	/* compiler optimization barrier needed for GCC >= 3.4 */
+	__asm__ __volatile__("": : :"memory");
+
+	memset ((void *)gd, 0, sizeof (gd_t));
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		if ((*init_fnc_ptr)() != 0) {
+			hang ();
+		}
+	}
+
+	/*
+	 * Now that we have DRAM mapped and working, we can
+	 * relocate the code and continue running from DRAM.
+	 */
+	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
+
+	/* We can reserve some RAM "on top" here.
+	 */
+
+	/* round down to next 4 kB limit.
+	 */
+	addr &= ~(4096 - 1);
+	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+	/* Reserve memory for U-Boot code, data & bss
+	 * round down to next 16 kB limit
+	 */
+	addr -= len;
+	addr &= ~(16 * 1024 - 1);
+
+	debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+
+	 /* Reserve memory for malloc() arena.
+	 */
+	addr_sp = addr - TOTAL_MALLOC_LEN;
+	debug ("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, addr_sp);
+
+	/*
+	 * (permanently) allocate a Board Info struct
+	 * and a permanent copy of the "global" data
+	 */
+	addr_sp -= sizeof(bd_t);
+	bd = (bd_t *)addr_sp;
+	gd->bd = bd;
+	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
+			sizeof(bd_t), addr_sp);
+
+	addr_sp -= sizeof(gd_t);
+	id = (gd_t *)addr_sp;
+	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
+			sizeof (gd_t), addr_sp);
+
+	/* Reserve memory for boot params.
+	 */
+	addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
+	bd->bi_boot_params = addr_sp;
+	debug ("Reserving %dk for boot params() at: %08lx\n",
+			CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
+
+	/*
+	 * Finally, we set up a new (bigger) stack.
+	 *
+	 * Leave some safety gap for SP, force alignment on 16 byte boundary
+	 * Clear initial stack frame
+	 */
+	addr_sp -= 16;
+	addr_sp &= ~0xF;
+	s = (ulong *)addr_sp;
+	*s-- = 0;
+	*s-- = 0;
+	addr_sp = (ulong)s;
+	debug ("Stack Pointer at: %08lx\n", addr_sp);
+
+	/*
+	 * Save local variables to board info struct
+	 */
+	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory */
+	bd->bi_memsize	= gd->ram_size;		/* size  of  DRAM memory in bytes */
+	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
+
+	memcpy (id, (void *)gd, sizeof (gd_t));
+
+	/* On the purple board we copy the code in a special way
+	 * in order to solve flash problems
+	 */
+#ifdef CONFIG_PURPLE
+	copy_code(addr);
+#endif
+
+	relocate_code (addr_sp, id, addr);
+
+	/* NOTREACHED - relocate_code() does not return */
+}
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+	cmd_tbl_t *cmdtp;
+#ifndef CONFIG_SYS_NO_FLASH
+	ulong size;
+#endif
+	extern void malloc_bin_reloc (void);
+#ifndef CONFIG_ENV_IS_NOWHERE
+	extern char * env_name_spec;
+#endif
+	char *s;
+	bd_t *bd;
+
+	gd = id;
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
+	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+
+	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
+
+	/*
+	 * We have to relocate the command table manually
+	 */
+	for (cmdtp = &__u_boot_cmd_start; cmdtp !=  &__u_boot_cmd_end; cmdtp++) {
+		ulong addr;
+
+		addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+		printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+				cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+		cmdtp->cmd =
+			(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+		addr = (ulong)(cmdtp->name) + gd->reloc_off;
+		cmdtp->name = (char *)addr;
+
+		if (cmdtp->usage) {
+			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+			cmdtp->usage = (char *)addr;
+		}
+#ifdef	CONFIG_SYS_LONGHELP
+		if (cmdtp->help) {
+			addr = (ulong)(cmdtp->help) + gd->reloc_off;
+			cmdtp->help = (char *)addr;
+		}
+#endif
+	}
+	/* there are some other pointer constants we must deal with */
+#ifndef CONFIG_ENV_IS_NOWHERE
+	env_name_spec += gd->reloc_off;
+#endif
+
+	bd = gd->bd;
+
+	/* The Malloc area is immediately below the monitor copy in DRAM */
+	mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
+			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
+	malloc_bin_reloc();
+
+#ifndef CONFIG_SYS_NO_FLASH
+	/* configure available FLASH banks */
+	size = flash_init();
+	display_flash_config (size);
+	bd->bi_flashsize = size;
+#endif
+
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for U-Boot */
+#else
+	bd->bi_flashoffset = 0;
+#endif
+
+#ifdef CONFIG_CMD_NAND
+	puts ("NAND:  ");
+	nand_init ();		/* go init the NAND */
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+	onenand_init();
+#endif
+
+	/* relocate environment function pointers etc. */
+	env_relocate();
+
+	/* IP Address */
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+#if defined(CONFIG_PCI)
+	/*
+	 * Do pci configuration
+	 */
+	pci_init();
+#endif
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+	/* Initialize stdio devices */
+	stdio_init ();
+
+	jumptable_init ();
+
+	/* Initialize the console (after the relocation and devices init) */
+	console_init_r ();
+/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+
+	/* Initialize from environment */
+	if ((s = getenv ("loadaddr")) != NULL) {
+		load_addr = simple_strtoul (s, NULL, 16);
+	}
+#if defined(CONFIG_CMD_NET)
+	if ((s = getenv ("bootfile")) != NULL) {
+		copy_filename (BootFile, s, sizeof (BootFile));
+	}
+#endif
+
+#ifdef CONFIG_CMD_SPI
+	puts ("SPI:   ");
+	spi_init ();		/* go init the SPI */
+	puts ("ready\n");
+#endif
+
+#if defined(CONFIG_MISC_INIT_R)
+	/* miscellaneous platform dependent initialisations */
+	misc_init_r ();
+#endif
+
+#ifdef CONFIG_BITBANGMII
+	bb_miiphy_init();
+#endif
+#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+	puts ("Net:   ");
+#endif
+	eth_initialize(gd->bd);
+#endif
+
+	/* main_loop() can return to retry autoboot, if so just run it again. */
+	for (;;) {
+		main_loop ();
+	}
+
+	/* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
new file mode 100644
index 00000000000..54af24cba3f
--- /dev/null
+++ b/arch/mips/lib/bootm.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <u-boot/zlib.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define	LINUX_MAX_ENVS		256
+#define	LINUX_MAX_ARGS		256
+
+static int	linux_argc;
+static char **	linux_argv;
+
+static char **	linux_env;
+static char *	linux_env_p;
+static int	linux_env_idx;
+
+static void linux_params_init (ulong start, char * commandline);
+static void linux_env_set (char * env_name, char * env_val);
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	void	(*theKernel) (int, char **, char **, int *);
+	char	*commandline = getenv ("bootargs");
+	char	env_buf[12];
+	char	*cp;
+
+	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
+		return 1;
+
+	/* find kernel entry point */
+	theKernel = (void (*)(int, char **, char **, int *))images->ep;
+
+	show_boot_progress (15);
+
+#ifdef DEBUG
+	printf ("## Transferring control to Linux (at address %08lx) ...\n",
+		(ulong) theKernel);
+#endif
+
+	linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline);
+
+#ifdef CONFIG_MEMSIZE_IN_BYTES
+	sprintf (env_buf, "%lu", (ulong)gd->ram_size);
+	debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size);
+#else
+	sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20));
+	debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20));
+#endif /* CONFIG_MEMSIZE_IN_BYTES */
+
+	linux_env_set ("memsize", env_buf);
+
+	sprintf (env_buf, "0x%08X", (uint) UNCACHED_SDRAM (images->rd_start));
+	linux_env_set ("initrd_start", env_buf);
+
+	sprintf (env_buf, "0x%X", (uint) (images->rd_end - images->rd_start));
+	linux_env_set ("initrd_size", env_buf);
+
+	sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart));
+	linux_env_set ("flash_start", env_buf);
+
+	sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize));
+	linux_env_set ("flash_size", env_buf);
+
+	cp = getenv("ethaddr");
+	if (cp != NULL) {
+		linux_env_set("ethaddr", cp);
+	}
+
+	cp = getenv("eth1addr");
+	if (cp != NULL) {
+		linux_env_set("eth1addr", cp);
+	}
+
+	/* we assume that the kernel is in place */
+	printf ("\nStarting kernel ...\n\n");
+
+	theKernel (linux_argc, linux_argv, linux_env, 0);
+	/* does not return */
+	return 1;
+}
+
+static void linux_params_init (ulong start, char *line)
+{
+	char *next, *quote, *argp;
+
+	linux_argc = 1;
+	linux_argv = (char **) start;
+	linux_argv[0] = 0;
+	argp = (char *) (linux_argv + LINUX_MAX_ARGS);
+
+	next = line;
+
+	while (line && *line && linux_argc < LINUX_MAX_ARGS) {
+		quote = strchr (line, '"');
+		next = strchr (line, ' ');
+
+		while (next != NULL && quote != NULL && quote < next) {
+			/* we found a left quote before the next blank
+			 * now we have to find the matching right quote
+			 */
+			next = strchr (quote + 1, '"');
+			if (next != NULL) {
+				quote = strchr (next + 1, '"');
+				next = strchr (next + 1, ' ');
+			}
+		}
+
+		if (next == NULL) {
+			next = line + strlen (line);
+		}
+
+		linux_argv[linux_argc] = argp;
+		memcpy (argp, line, next - line);
+		argp[next - line] = 0;
+
+		argp += next - line + 1;
+		linux_argc++;
+
+		if (*next)
+			next++;
+
+		line = next;
+	}
+
+	linux_env = (char **) (((ulong) argp + 15) & ~15);
+	linux_env[0] = 0;
+	linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS);
+	linux_env_idx = 0;
+}
+
+static void linux_env_set (char *env_name, char *env_val)
+{
+	if (linux_env_idx < LINUX_MAX_ENVS - 1) {
+		linux_env[linux_env_idx] = linux_env_p;
+
+		strcpy (linux_env_p, env_name);
+		linux_env_p += strlen (env_name);
+
+		strcpy (linux_env_p, "=");
+		linux_env_p += 1;
+
+		strcpy (linux_env_p, env_val);
+		linux_env_p += strlen (env_val);
+
+		linux_env_p++;
+		linux_env[++linux_env_idx] = 0;
+	}
+}
diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c
new file mode 100644
index 00000000000..cc70fa93f3e
--- /dev/null
+++ b/arch/mips/lib/bootm_qemu_mips.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2008
+ * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <asm/byteorder.h>
+#include <asm/addrspace.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+{
+	void	(*theKernel) (int, char **, char **, int *);
+	char	*bootargs = getenv ("bootargs");
+	char	*start;
+	uint	len;
+
+	/* find kernel entry point */
+	theKernel = (void (*)(int, char **, char **, int *))images->ep;
+
+	show_boot_progress (15);
+
+	debug ("## Transferring control to Linux (at address %08lx) ...\n",
+		(ulong) theKernel);
+
+	gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256;
+	debug ("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params);
+
+	/* set Magic */
+	*(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678;
+	/* set ram_size */
+	*(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size;
+
+	start = (char*)gd->bd->bi_boot_params;
+
+	len = strlen(bootargs);
+
+	strncpy(start, bootargs, len + 1);
+
+	start += len;
+
+	len = images->rd_end - images->rd_start;
+	if (len > 0) {
+		start += sprintf(start," rd_start=0x%08X rd_size=0x%0X",
+		(uint) UNCACHED_SDRAM (images->rd_start),
+		(uint) len);
+	}
+
+	/* we assume that the kernel is in place */
+	printf ("\nStarting kernel ...\n\n");
+
+	theKernel (0, NULL, NULL, 0);
+	/* does not return */
+	return 1;
+}
diff --git a/arch/mips/lib/time.c b/arch/mips/lib/time.c
new file mode 100644
index 00000000000..0e6644149b4
--- /dev/null
+++ b/arch/mips/lib/time.c
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mipsregs.h>
+
+static unsigned long timestamp;
+
+/* how many counter cycles in a jiffy */
+#define CYCLES_PER_JIFFY	(CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+	/* Set up the timer for the first expiration. */
+	timestamp = 0;
+	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+
+	return 0;
+}
+
+void reset_timer(void)
+{
+	timestamp = 0;
+	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+}
+
+ulong get_timer(ulong base)
+{
+	unsigned int count;
+	unsigned int expirelo = read_c0_compare();
+
+	/* Check to see if we have missed any timestamps. */
+	count = read_c0_count();
+	while ((count - expirelo) < 0x7fffffff) {
+		expirelo += CYCLES_PER_JIFFY;
+		timestamp++;
+	}
+	write_c0_compare(expirelo);
+
+	return (timestamp - base);
+}
+
+void set_timer(ulong t)
+{
+	timestamp = t;
+	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned int tmo;
+
+	tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
+	while ((tmo - read_c0_count()) < 0x7fffffff)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}