sparc: Update LEON serial drivers to use readl/writel macros

Update the LEON2/3 serial driver to make use of the readl and writel
macros as well as the WATCHDOG_RESET() macro.

Add readl/writel and friends to the asm/io.h file.

Introduce the gd->arch.uart variable to store register address.

Lastly, remove baudrate scaler macro variables from board config. It
is now calculated in the serial driver using the global data variable.

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>

3 files changed, 118 insertions, 112 deletions

diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c
index 5cfbb9ed159..603364ee0bd 100644
--- a/arch/sparc/cpu/leon2/serial.c
+++ b/arch/sparc/cpu/leon2/serial.c
@@ -1,72 +1,78 @@
 /* GRLIB APBUART Serial controller driver
  *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2008, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
-#include <asm/processor.h>
-#include <asm/leon.h>
+#include <asm/io.h>
 #include <serial.h>
-#include <linux/compiler.h>
+#include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static unsigned leon2_serial_calc_scaler(unsigned freq, unsigned baud)
+{
+	return (((freq*10) / (baud*8)) - 5) / 10;
+}
+
 static int leon2_serial_init(void)
 {
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+	LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
 	LEON2_Uart_regs *regs;
 	unsigned int tmp;
 
-	/* Init LEON2 UART
-	 *
-	 * Set scaler / baud rate
-	 *
-	 * Receiver & transmitter enable
-	 */
 #if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+	regs = (LEON2_Uart_regs *)&leon2->UART_Channel_1;
 #else
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+	regs = (LEON2_Uart_regs *)&leon2->UART_Channel_2;
 #endif
 
-	regs->UART_Scaler = CONFIG_SYS_LEON2_UART1_SCALER;
+	/* Set scaler / baud rate */
+	tmp = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
+	writel(tmp, &regs->UART_Scaler);
 
 	/* Let bit 11 be unchanged (debug bit for GRMON) */
-	tmp = READ_WORD(regs->UART_Control);
+	tmp = readl(&regs->UART_Control) & LEON2_UART_CTRL_DBG;
+	tmp |= (LEON2_UART1_LOOPBACK_ENABLE << 7);
+	tmp |= (LEON2_UART1_FLOWCTRL_ENABLE << 6);
+	tmp |= (LEON2_UART1_PARITY_ENABLE << 5);
+	tmp |= (LEON2_UART1_ODDPAR_ENABLE << 4);
+	/* Receiver & transmitter enable */
+	tmp |= (LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
+	writel(tmp, &regs->UART_Control);
+
+	gd->arch.uart = regs;
+	return 0;
+}
 
-	regs->UART_Control = ((tmp & LEON2_UART_CTRL_DBG) |
-			      (LEON2_UART1_LOOPBACK_ENABLE << 7) |
-			      (LEON2_UART1_FLOWCTRL_ENABLE << 6) |
-			      (LEON2_UART1_PARITY_ENABLE << 5) |
-			      (LEON2_UART1_ODDPAR_ENABLE << 4) |
-			      LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
+static inline LEON2_Uart_regs *leon2_get_uart_regs(void)
+{
+	LEON2_Uart_regs *uart = gd->arch.uart;
 
-	return 0;
+	return uart;
 }
 
 static void leon2_serial_putc_raw(const char c)
 {
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-	LEON2_Uart_regs *regs;
+	LEON2_Uart_regs *uart = leon2_get_uart_regs();
 
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+	if (!uart)
+		return;
 
 	/* Wait for last character to go. */
-	while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_THE)) ;
+	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_THE))
+		WATCHDOG_RESET();
 
 	/* Send data */
-	regs->UART_Channel = c;
+	writel(c, &uart->UART_Channel);
 
 #ifdef LEON_DEBUG
 	/* Wait for data to be sent */
-	while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_TSE)) ;
+	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_TSE))
+		WATCHDOG_RESET();
 #endif
 }
 
@@ -80,56 +86,43 @@ static void leon2_serial_putc(const char c)
 
 static int leon2_serial_getc(void)
 {
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-	LEON2_Uart_regs *regs;
+	LEON2_Uart_regs *uart = leon2_get_uart_regs();
 
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+	if (!uart)
+		return 0;
 
 	/* Wait for a character to arrive. */
-	while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR)) ;
+	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_DR))
+		WATCHDOG_RESET();
 
-	/* read data */
-	return READ_WORD(regs->UART_Channel);
+	/* Read character data */
+	return readl(&uart->UART_Channel);
 }
 
 static int leon2_serial_tstc(void)
 {
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-	LEON2_Uart_regs *regs;
+	LEON2_Uart_regs *uart = leon2_get_uart_regs();
 
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+	if (!uart)
+		return 0;
 
-	return (READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR);
+	return readl(&uart->UART_Status) & LEON2_UART_STAT_DR;
 }
 
-/* set baud rate for uart */
 static void leon2_serial_setbrg(void)
 {
-	/* update baud rate settings, read it from gd->baudrate */
+	LEON2_Uart_regs *uart = leon2_get_uart_regs();
 	unsigned int scaler;
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-	LEON2_Uart_regs *regs;
 
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
-#else
-	regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
-#endif
+	if (!uart)
+		return;
+
+	if (!gd->baudrate)
+		gd->baudrate = CONFIG_BAUDRATE;
+
+	scaler = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
 
-	if (gd->baudrate > 0) {
-		scaler =
-		    (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
-		     5) / 10;
-		regs->UART_Scaler = scaler;
-	}
+	writel(scaler, &uart->UART_Scaler);
 }
 
 static struct serial_device leon2_serial_drv = {
diff --git a/arch/sparc/cpu/leon3/prom.c b/arch/sparc/cpu/leon3/prom.c
index b83776bc06d..d0f18603a15 100644
--- a/arch/sparc/cpu/leon3/prom.c
+++ b/arch/sparc/cpu/leon3/prom.c
@@ -21,7 +21,8 @@
 #define PRINT_ROM_VEC
 */
 extern struct linux_romvec *kernel_arg_promvec;
-extern ambapp_dev_apbuart *leon3_apbuart;
+
+DECLARE_GLOBAL_DATA_PTR;
 
 #define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
 #define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
@@ -909,7 +910,7 @@ void leon_prom_init(struct leon_prom_info *pspi)
 	pspi->avail.num_bytes = pspi->totphys.num_bytes;
 
 	/* Set the pointer to the Console UART in romvec */
-	pspi->reloc_funcs.leon3_apbuart = leon3_apbuart;
+	pspi->reloc_funcs.leon3_apbuart = gd->arch.uart;
 
 	{
 		int j = 1;
diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c
index bca6b6548b9..f1dcab33778 100644
--- a/arch/sparc/cpu/leon3/serial.c
+++ b/arch/sparc/cpu/leon3/serial.c
@@ -1,66 +1,70 @@
 /* GRLIB APBUART Serial controller driver
  *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ * (C) Copyright 2007, 2015
+ * Daniel Hellstrom, Cobham Gaisler, daniel@gaisler.com.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
-#include <asm/processor.h>
-#include <asm/leon.h>
+#include <asm/io.h>
 #include <ambapp.h>
 #include <serial.h>
-#include <linux/compiler.h>
+#include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-ambapp_dev_apbuart *leon3_apbuart = NULL;
-
 static int leon3_serial_init(void)
 {
+	ambapp_dev_apbuart *uart;
 	ambapp_apbdev apbdev;
 	unsigned int tmp;
 
 	/* find UART */
-	if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) == 1) {
+	if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) != 1)
+		return -1; /* didn't find hardware */
 
-		leon3_apbuart = (ambapp_dev_apbuart *) apbdev.address;
+	/* found apbuart, let's init .. */
+	uart = (ambapp_dev_apbuart *) apbdev.address;
 
-		/* found apbuart, let's init...
-		 *
-		 * Set scaler / baud rate
-		 *
-		 * Receiver & transmitter enable
-		 */
-		leon3_apbuart->scaler = CONFIG_SYS_GRLIB_APBUART_SCALER;
+	/* Set scaler / baud rate */
+	tmp = (((CONFIG_SYS_CLK_FREQ*10) / (CONFIG_BAUDRATE*8)) - 5)/10;
+	writel(tmp, &uart->scaler);
 
-		/* Let bit 11 be unchanged (debug bit for GRMON) */
-		tmp = READ_WORD(leon3_apbuart->ctrl);
+	/* Let bit 11 be unchanged (debug bit for GRMON) */
+	tmp = readl(&uart->ctrl) & LEON_REG_UART_CTRL_DBG;
+	/* Receiver & transmitter enable */
+	tmp |= LEON_REG_UART_CTRL_RE | LEON_REG_UART_CTRL_TE;
+	writel(tmp, &uart->ctrl);
 
-		leon3_apbuart->ctrl = ((tmp & LEON_REG_UART_CTRL_DBG) |
-				       LEON_REG_UART_CTRL_RE |
-				       LEON_REG_UART_CTRL_TE);
+	gd->arch.uart = uart;
+	return 0;
+}
 
-		return 0;
-	}
-	return -1;		/* didn't find hardware */
+static inline ambapp_dev_apbuart *leon3_get_uart_regs(void)
+{
+	ambapp_dev_apbuart *uart = gd->arch.uart;
+	return uart;
 }
 
 static void leon3_serial_putc_raw(const char c)
 {
-	if (!leon3_apbuart)
+	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+	if (!uart)
 		return;
 
 	/* Wait for last character to go. */
-	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_THE)) ;
+	while (!(readl(&uart->status) & LEON_REG_UART_STATUS_THE))
+		WATCHDOG_RESET();
 
 	/* Send data */
-	leon3_apbuart->data = c;
+	writel(c, &uart->data);
 
 #ifdef LEON_DEBUG
 	/* Wait for data to be sent */
-	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_TSE)) ;
+	while (!(readl(&uart->status) & LEON_REG_UART_STATUS_TSE))
+		WATCHDOG_RESET();
 #endif
 }
 
@@ -74,36 +78,44 @@ static void leon3_serial_putc(const char c)
 
 static int leon3_serial_getc(void)
 {
-	if (!leon3_apbuart)
+	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+	if (!uart)
 		return 0;
 
 	/* Wait for a character to arrive. */
-	while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_DR)) ;
+	while (!(readl(&uart->status) & LEON_REG_UART_STATUS_DR))
+		WATCHDOG_RESET();
 
-	/* read data */
-	return READ_WORD(leon3_apbuart->data);
+	/* Read character data */
+	return readl(&uart->data);
 }
 
 static int leon3_serial_tstc(void)
 {
-	if (leon3_apbuart)
-		return (READ_WORD(leon3_apbuart->status) &
-			LEON_REG_UART_STATUS_DR);
-	return 0;
+	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
+
+	if (!uart)
+		return 0;
+
+	return readl(&uart->status) & LEON_REG_UART_STATUS_DR;
 }
 
 /* set baud rate for uart */
 static void leon3_serial_setbrg(void)
 {
-	/* update baud rate settings, read it from gd->baudrate */
+	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
 	unsigned int scaler;
-	if (leon3_apbuart && (gd->baudrate > 0)) {
-		scaler =
-		    (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
-		     5) / 10;
-		leon3_apbuart->scaler = scaler;
-	}
-	return;
+
+	if (!uart)
+		return;
+
+	if (!gd->baudrate)
+		gd->baudrate = CONFIG_BAUDRATE;
+
+	scaler = (((CONFIG_SYS_CLK_FREQ*10) / (gd->baudrate*8)) - 5)/10;
+
+	writel(scaler, &uart->scaler);
 }
 
 static struct serial_device leon3_serial_drv = {