x86: Refactor PIRQ routing support

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

1 files changed, 213 insertions, 0 deletions

diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
new file mode 100644
index 00000000000..d1711af8f84
--- /dev/null
+++ b/arch/x86/cpu/irq.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pirq_routing.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct irq_router irq_router;
+static struct irq_routing_table *pirq_routing_table;
+
+bool pirq_check_irq_routed(int link, u8 irq)
+{
+	u8 pirq;
+	int base = irq_router.link_base;
+
+	if (irq_router.config == PIRQ_VIA_PCI)
+		pirq = x86_pci_read_config8(irq_router.bdf,
+					    LINK_N2V(link, base));
+	else
+		pirq = readb(irq_router.ibase + LINK_N2V(link, base));
+
+	pirq &= 0xf;
+
+	/* IRQ# 0/1/2/8/13 are reserved */
+	if (pirq < 3 || pirq == 8 || pirq == 13)
+		return false;
+
+	return pirq == irq ? true : false;
+}
+
+int pirq_translate_link(int link)
+{
+	return LINK_V2N(link, irq_router.link_base);
+}
+
+void pirq_assign_irq(int link, u8 irq)
+{
+	int base = irq_router.link_base;
+
+	/* IRQ# 0/1/2/8/13 are reserved */
+	if (irq < 3 || irq == 8 || irq == 13)
+		return;
+
+	if (irq_router.config == PIRQ_VIA_PCI)
+		x86_pci_write_config8(irq_router.bdf,
+				      LINK_N2V(link, base), irq);
+	else
+		writeb(irq, irq_router.ibase + LINK_N2V(link, base));
+}
+
+static inline void fill_irq_info(struct irq_info **slotp, int *entries, u8 bus,
+				 u8 device, u8 func, u8 pin, u8 pirq)
+{
+	struct irq_info *slot = *slotp;
+
+	slot->bus = bus;
+	slot->devfn = (device << 3) | func;
+	slot->irq[pin - 1].link = LINK_N2V(pirq, irq_router.link_base);
+	slot->irq[pin - 1].bitmap = irq_router.irq_mask;
+	(*entries)++;
+	(*slotp)++;
+}
+
+__weak void cpu_irq_init(void)
+{
+	return;
+}
+
+static int create_pirq_routing_table(void)
+{
+	const void *blob = gd->fdt_blob;
+	struct fdt_pci_addr addr;
+	int node;
+	int len, count;
+	const u32 *cell;
+	struct irq_routing_table *rt;
+	struct irq_info *slot;
+	int irq_entries = 0;
+	int i;
+	int ret;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_IRQ_ROUTER);
+	if (node < 0) {
+		debug("%s: Cannot find irq router node\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = fdtdec_get_pci_addr(blob, node, FDT_PCI_SPACE_CONFIG,
+				  "reg", &addr);
+	if (ret)
+		return ret;
+
+	/* extract the bdf from fdt_pci_addr */
+	irq_router.bdf = addr.phys_hi & 0xffff00;
+
+	ret = fdt_find_string(blob, node, "intel,pirq-config", "pci");
+	if (!ret) {
+		irq_router.config = PIRQ_VIA_PCI;
+	} else {
+		ret = fdt_find_string(blob, node, "intel,pirq-config", "ibase");
+		if (!ret)
+			irq_router.config = PIRQ_VIA_IBASE;
+		else
+			return -EINVAL;
+	}
+
+	ret = fdtdec_get_int_array(blob, node, "intel,pirq-link",
+				   &irq_router.link_base, 1);
+	if (ret)
+		return ret;
+
+	irq_router.irq_mask = fdtdec_get_int(blob, node,
+					     "intel,pirq-mask", PIRQ_BITMAP);
+
+	if (irq_router.config == PIRQ_VIA_IBASE) {
+		int ibase_off;
+
+		ibase_off = fdtdec_get_int(blob, node, "intel,ibase-offset", 0);
+		if (!ibase_off)
+			return -EINVAL;
+
+		/*
+		 * Here we assume that the IBASE register has already been
+		 * properly configured by U-Boot before.
+		 *
+		 * By 'valid' we mean:
+		 *   1) a valid memory space carved within system memory space
+		 *      assigned to IBASE register block.
+		 *   2) memory range decoding is enabled.
+		 * Hence we don't do any santify test here.
+		 */
+		irq_router.ibase = x86_pci_read_config32(irq_router.bdf,
+							 ibase_off);
+		irq_router.ibase &= ~0xf;
+	}
+
+	cell = fdt_getprop(blob, node, "intel,pirq-routing", &len);
+	if (!cell)
+		return -EINVAL;
+
+	if ((len % sizeof(struct pirq_routing)) == 0)
+		count = len / sizeof(struct pirq_routing);
+	else
+		return -EINVAL;
+
+	rt = malloc(sizeof(struct irq_routing_table));
+	if (!rt)
+		return -ENOMEM;
+	memset((char *)rt, 0, sizeof(struct irq_routing_table));
+
+	/* Populate the PIRQ table fields */
+	rt->signature = PIRQ_SIGNATURE;
+	rt->version = PIRQ_VERSION;
+	rt->rtr_bus = 0;
+	rt->rtr_devfn = (PCI_DEV(irq_router.bdf) << 3) |
+			PCI_FUNC(irq_router.bdf);
+	rt->rtr_vendor = PCI_VENDOR_ID_INTEL;
+	rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31;
+
+	slot = rt->slots;
+
+	/* Now fill in the irq_info entries in the PIRQ table */
+	for (i = 0; i < count; i++) {
+		struct pirq_routing pr;
+
+		pr.bdf = fdt_addr_to_cpu(cell[0]);
+		pr.pin = fdt_addr_to_cpu(cell[1]);
+		pr.pirq = fdt_addr_to_cpu(cell[2]);
+
+		debug("irq_info %d: b.d.f %x.%x.%x INT%c PIRQ%c\n",
+		      i, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
+		      PCI_FUNC(pr.bdf), 'A' + pr.pin - 1,
+		      'A' + pr.pirq);
+		fill_irq_info(&slot, &irq_entries, PCI_BUS(pr.bdf),
+			      PCI_DEV(pr.bdf), PCI_FUNC(pr.bdf),
+			      pr.pin, pr.pirq);
+		cell += sizeof(struct pirq_routing) / sizeof(u32);
+	}
+
+	rt->size = irq_entries * sizeof(struct irq_info) + 32;
+
+	pirq_routing_table = rt;
+
+	return 0;
+}
+
+void pirq_init(void)
+{
+	cpu_irq_init();
+
+	if (create_pirq_routing_table()) {
+		debug("Failed to create pirq routing table\n");
+	} else {
+		/* Route PIRQ */
+		pirq_route_irqs(pirq_routing_table->slots,
+				get_irq_slot_count(pirq_routing_table));
+	}
+}
+
+u32 write_pirq_routing_table(u32 addr)
+{
+	return copy_pirq_routing_table(addr, pirq_routing_table);
+}