x86: tpl: Add a fake PCI bus

In TPL we try to minimise code size so do not include the PCI subsystem.
We can use fixed BARs and drivers can directly program the devices that
they need.

However we do need to bind the devices on the PCI bus and without PCI this
does not ordinarily happen. As a work-around, define a fake PCI bus which
does this binding, but no other PCI operations. This is a convenient way
to ensure that we can use the same device tree for TPL, SPL and U-Boot
proper:

   TPL    - CONFIG_TPL_PCI is not set (no auto-config, fake PCI bus)
   SPL    - CONFIG_SPL_PCI is set (no auto-config but with real PCI bus)
   U-Boot - CONFIG_PCI is set (full auto-config after relocation)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/arch/x86/lib/tpl.c b/arch/x86/lib/tpl.c
index d70f590541c..6ca3f7b1f20 100644
--- a/arch/x86/lib/tpl.c
+++ b/arch/x86/lib/tpl.c
@@ -5,6 +5,7 @@
 
 #include <common.h>
 #include <debug_uart.h>
+#include <dm.h>
 #include <spl.h>
 #include <asm/cpu.h>
 #include <asm/mtrr.h>
@@ -115,3 +116,27 @@ void spl_board_init(void)
 {
 	preloader_console_init();
 }
+
+#if !CONFIG_IS_ENABLED(PCI)
+/*
+ * This is a fake PCI bus for TPL when it doesn't have proper PCI. It is enough
+ * to bind the devices on the PCI bus, some of which have early-regs properties
+ * providing fixed BARs. Individual drivers program these BARs themselves so
+ * that they can access the devices. The BARs are allocated statically in the
+ * device tree.
+ *
+ * Once SPL is running it enables PCI properly, but does not auto-assign BARs
+ * for devices, so the TPL BARs continue to be used. Once U-Boot starts it does
+ * the auto allocation (after relocation).
+ */
+static const struct udevice_id tpl_fake_pci_ids[] = {
+	{ .compatible = "pci-x86" },
+	{ }
+};
+
+U_BOOT_DRIVER(pci_x86) = {
+	.name	= "pci_x86",
+	.id	= UCLASS_SIMPLE_BUS,
+	.of_match = tpl_fake_pci_ids,
+};
+#endif