rockchip: veyron: Adjust ARM clock after relocation

Update board_init() to increase the ARM clock to the maximum speed on
veyron boards. This makes quite a large difference in performance. With
this change, speed goes from about 750 DMIPS to 2720 DMIPs.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c
index baf9522bcdd..bca6075c2c3 100644
--- a/arch/arm/mach-rockchip/rk3288-board.c
+++ b/arch/arm/mach-rockchip/rk3288-board.c
@@ -16,6 +16,8 @@
 #include <asm/arch/boot_mode.h>
 #include <asm/gpio.h>
 #include <dm/pinctrl.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <power/regulator.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -56,6 +58,39 @@ int board_late_init(void)
 	return rk_board_late_init();
 }
 
+#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+static int veyron_init(void)
+{
+	struct udevice *dev;
+	struct clk clk;
+	int ret;
+
+	ret = regulator_get_by_platname("vdd_arm", &dev);
+	if (ret)
+		return ret;
+
+	/* Slowly raise to max CPU voltage to prevent overshoot */
+	ret = regulator_set_value(dev, 1200000);
+	if (ret)
+		return ret;
+	udelay(175); /* Must wait for voltage to stabilize, 2mV/us */
+	ret = regulator_set_value(dev, 1400000);
+	if (ret)
+		return ret;
+	udelay(100); /* Must wait for voltage to stabilize, 2mV/us */
+
+	ret = rockchip_get_clk(&clk.dev);
+	if (ret)
+		return ret;
+	clk.id = PLL_APLL;
+	ret = clk_set_rate(&clk, 1800000000);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
@@ -87,6 +122,15 @@ err:
 
 	return -1;
 #else
+	int ret;
+
+	/* We do some SoC one time setting here */
+	if (!fdt_node_check_compatible(gd->fdt_blob, 0, "google,veyron")) {
+		ret = veyron_init();
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 #endif
 }