armv8: ls1046a: initial icid setup support

Add infrastructure for ICID setup and device tree fixup on ARM
platforms. This include basic ICID setup for several devices.

Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

5 files changed, 225 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 1e9e4680fe1..5d6f68aad67 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -37,6 +37,7 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1046A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
+obj-y += icid.o ls1046_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1088A),)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
new file mode 100644
index 00000000000..ae3b8daa956
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+
+static void set_icid(struct icid_id_table *tbl, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+}
+
+void set_icids(void)
+{
+	/* setup general icid offsets */
+	set_icid(icid_tbl, icid_tbl_sz);
+}
+
+int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids)
+{
+	int i, ret;
+	u32 prop[8];
+
+	/*
+	 * Note: The "iommus" property definition mentions Stream IDs while
+	 * this code handles ICIDs. The current implementation assumes that
+	 * ICIDs and Stream IDs are equal.
+	 */
+	for (i = 0; i < num_ids; i++) {
+		prop[i * 2] = cpu_to_fdt32(smmu_ph);
+		prop[i * 2 + 1] = cpu_to_fdt32(ids[i]);
+	}
+	ret = fdt_setprop(blob, off, "iommus",
+			  prop, sizeof(u32) * num_ids * 2);
+	if (ret) {
+		printf("WARNING unable to set iommus: %s\n", fdt_strerror(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+int fdt_fixup_icid_tbl(void *blob, int smmu_ph,
+		       struct icid_id_table *tbl, int size)
+{
+	int i, err, off;
+
+	for (i = 0; i < size; i++) {
+		if (!tbl[i].compat)
+			continue;
+
+		off = fdt_node_offset_by_compat_reg(blob,
+						    tbl[i].compat,
+						    tbl[i].compat_addr);
+		if (off > 0) {
+			err = fdt_set_iommu_prop(blob, off, smmu_ph,
+						 &tbl[i].id, 1);
+			if (err)
+				return err;
+		} else {
+			printf("WARNING could not find node %s: %s.\n",
+			       tbl[i].compat, fdt_strerror(off));
+		}
+	}
+
+	return 0;
+}
+
+int fdt_get_smmu_phandle(void *blob)
+{
+	int noff, smmu_ph;
+
+	noff = fdt_node_offset_by_compatible(blob, -1, "arm,mmu-500");
+	if (noff < 0) {
+		printf("WARNING failed to get smmu node: %s\n",
+		       fdt_strerror(noff));
+		return noff;
+	}
+
+	smmu_ph = fdt_get_phandle(blob, noff);
+	if (!smmu_ph) {
+		smmu_ph = fdt_create_phandle(blob, noff);
+		if (!smmu_ph) {
+			printf("WARNING failed to get smmu phandle\n");
+			return -1;
+		}
+	}
+
+	return smmu_ph;
+}
+
+void fdt_fixup_icid(void *blob)
+{
+	int smmu_ph;
+
+	smmu_ph = fdt_get_smmu_phandle(blob);
+	if (smmu_ph < 0)
+		return;
+
+	fdt_fixup_icid_tbl(blob, smmu_ph, icid_tbl, icid_tbl_sz);
+}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
new file mode 100644
index 00000000000..1c528ab751e
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+	SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+	SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+	SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_ETR_ICID(FSL_ETR_STREAM_ID),
+	SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 8028d5228f4..2f306c509ab 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -11,6 +11,7 @@
 #include <asm/io.h>
 #include <asm/global_data.h>
 #include <asm/arch-fsl-layerscape/config.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 #include <fsl_csu.h>
 #endif
@@ -623,6 +624,10 @@ void fsl_lsch2_early_init_f(void)
 	erratum_a009798();
 	erratum_a008997();
 	erratum_a009007();
+
+#ifdef CONFIG_ARCH_LS1046A
+	set_icids();
+#endif
 }
 #endif
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
new file mode 100644
index 00000000000..57909392eab
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _FSL_ICID_H_
+#define _FSL_ICID_H_
+
+#include <asm/types.h>
+#include <fsl_qbman.h>
+
+struct icid_id_table {
+	const char *compat;
+	u32 id;
+	u32 reg;
+	phys_addr_t compat_addr;
+	phys_addr_t reg_addr;
+};
+
+u32 get_ppid_icid(int ppid_tbl_idx, int ppid);
+int fdt_get_smmu_phandle(void *blob);
+int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids);
+void set_icids(void);
+void fdt_fixup_icid(void *blob);
+
+#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \
+	{ .compat = name, \
+	  .id = idA, \
+	  .reg = regA, \
+	  .compat_addr = compataddr, \
+	  .reg_addr = addr, \
+	}
+
+#define SET_SCFG_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
+		offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
+		compataddr)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(compat, streamid) \
+	SET_SCFG_ICID(compat, streamid, sata_icid,\
+		AHCI_BASE_ADDR)
+
+#define SET_SDHC_ICID(streamid) \
+	SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\
+		CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SET_QDMA_ICID(compat, streamid) \
+	SET_SCFG_ICID(compat, streamid, dma_icid,\
+		QDMA_BASE_ADDR)
+
+#define SET_EDMA_ICID(streamid) \
+	SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
+		EDMA_BASE_ADDR)
+
+#define SET_ETR_ICID(streamid) \
+	SET_SCFG_ICID(NULL, streamid, etr_icid, 0)
+
+#define SET_DEBUG_ICID(streamid) \
+	SET_SCFG_ICID(NULL, streamid, debug_icid, 0)
+
+#define SET_QMAN_ICID(streamid) \
+	SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
+		offsetof(struct ccsr_qman, liodnr) + \
+		CONFIG_SYS_FSL_QMAN_ADDR, \
+		CONFIG_SYS_FSL_QMAN_ADDR)
+
+#define SET_BMAN_ICID(streamid) \
+	SET_ICID_ENTRY("fsl,bman", streamid, streamid, \
+		offsetof(struct ccsr_bman, liodnr) + \
+		CONFIG_SYS_FSL_BMAN_ADDR, \
+		CONFIG_SYS_FSL_BMAN_ADDR)
+
+extern struct icid_id_table icid_tbl[];
+extern int icid_tbl_sz;
+
+#endif