Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

5 files changed, 134 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index d4bce6d4dda..6375a81fd43 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -95,3 +95,48 @@ void set_dp_phy_ctrl(unsigned int enable)
 	if (cpu_is_exynos5())
 		exynos5_dp_phy_control(enable);
 }
+
+static void exynos5_set_ps_hold_ctrl(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* Set PS-Hold high */
+	setbits_le32(&power->ps_hold_control,
+			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+}
+
+void set_ps_hold_ctrl(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_ps_hold_ctrl();
+}
+
+
+static void exynos5_set_xclkout(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* use xxti for xclk out */
+	clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
+				PMU_DEBUG_XXTI);
+}
+
+void set_xclkout(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_xclkout();
+}
+
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void)
+{
+	if (cpu_is_exynos5()) {
+		struct exynos5_power *power =
+			(struct exynos5_power *)samsung_get_base_power();
+
+		/* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/
+		setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
+	}
+}
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index ed8c8dd6063..61d35a83eac 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -151,4 +151,9 @@
 		};
 	};
 
+	tmu@10060000 {
+		compatible = "samsung,exynos-tmu";
+		reg = <0x10060000 0x10000>;
+	};
+
 };
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index d2fdb598174..3549667d918 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -857,6 +857,9 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
 
 void set_usbhost_phy_ctrl(unsigned int enable);
 
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void);
+
 #define POWER_USB_HOST_PHY_CTRL_EN		(1 << 0)
 #define POWER_USB_HOST_PHY_CTRL_DISABLE		(0 << 0)
 
@@ -864,4 +867,25 @@ void set_dp_phy_ctrl(unsigned int enable);
 
 #define EXYNOS_DP_PHY_ENABLE		(1 << 0)
 
+#define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH	(1 << 8)
+#define POWER_ENABLE_HW_TRIP			(1UL << 31)
+
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
+void set_ps_hold_ctrl(void);
+
+/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
+#define PMU_DEBUG_XXTI                          0x1000
+/* Mask bit[12:8] for xxti clock selection */
+#define PMU_DEBUG_CLKOUT_SEL_MASK               0x1f00
+
+/*
+ * Pmu debug is used for xclkout, enable xclkout with
+ * source as XXTI
+ */
+void set_xclkout(void);
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h
index 306b41d8256..46b25a608ba 100644
--- a/arch/arm/include/asm/arch-exynos/spl.h
+++ b/arch/arm/include/asm/arch-exynos/spl.h
@@ -78,11 +78,12 @@ struct spl_machine_param {
 	 */
 	u32		uboot_size;
 	enum boot_mode	boot_source;	/* Boot device */
-	enum mem_manuf	mem_manuf;	/* Memory Manufacturer */
 	unsigned	frequency_mhz;	/* Frequency of memory in MHz */
 	unsigned	arm_freq_mhz;	/* ARM Frequency in MHz */
 	u32		serial_base;	/* Serial base address */
 	u32		i2c_base;	/* i2c base address */
+	u32		board_rev_gpios;	/* Board revision GPIOs */
+	enum mem_manuf	mem_manuf;	/* Memory Manufacturer */
 } __attribute__((__packed__));
 #endif
 
diff --git a/arch/arm/include/asm/arch-exynos/tmu.h b/arch/arm/include/asm/arch-exynos/tmu.h
new file mode 100644
index 00000000000..7e0158efb65
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/tmu.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *      http://www.samsung.com
+ * Akshay Saraswat <akshay.s@samsung.com>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TMU_H
+#define __ASM_ARCH_TMU_H
+
+struct exynos5_tmu_reg {
+	unsigned triminfo;
+	unsigned rsvd1;
+	unsigned rsvd2;
+	unsigned rsvd3;
+	unsigned rsvd4;
+	unsigned triminfo_control;
+	unsigned rsvd5;
+	unsigned rsvd6;
+	unsigned tmu_control;
+	unsigned rsvd7;
+	unsigned tmu_status;
+	unsigned sampling_internal;
+	unsigned counter_value0;
+	unsigned counter_value1;
+	unsigned rsvd8;
+	unsigned rsvd9;
+	unsigned current_temp;
+	unsigned rsvd10;
+	unsigned rsvd11;
+	unsigned rsvd12;
+	unsigned threshold_temp_rise;
+	unsigned threshold_temp_fall;
+	unsigned rsvd13;
+	unsigned rsvd14;
+	unsigned past_temp3_0;
+	unsigned past_temp7_4;
+	unsigned past_temp11_8;
+	unsigned past_temp15_12;
+	unsigned inten;
+	unsigned intstat;
+	unsigned intclear;
+	unsigned rsvd15;
+	unsigned emul_con;
+};
+#endif /* __ASM_ARCH_TMU_H */