Merge git://www.denx.de/git/u-boot-imx

Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

7 files changed, 72 insertions, 31 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe653210aeb..da9324b43ca 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -97,6 +97,9 @@ config ARM_ERRATA_833069
 config ARM_ERRATA_833471
 	bool
 
+config ARM_ERRATA_845369
+       bool
+
 config ARM_ERRATA_852421
 	bool
 
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index f06fd28940e..7b84a7a0f16 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -187,6 +187,12 @@ ENTRY(cpu_init_cp15)
 	mcr	p15, 0, r0, c15, c0, 1	@ write diagnostic register
 #endif
 
+#ifdef CONFIG_ARM_ERRATA_845369
+	mrc     p15, 0, r0, c15, c0, 1	@ read diagnostic register
+	orr     r0, r0, #1 << 22	@ set bit #22
+	mcr     p15, 0, r0, c15, c0, 1	@ write diagnostic register
+#endif
+
 	mov	r5, lr			@ Store my Caller
 	mrc	p15, 0, r1, c0, c0, 0	@ r1 has Read Main ID Register (MIDR)
 	mov	r3, r1, lsr #20		@ get variant field
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index a8456a284a1..41f7240a359 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -863,7 +863,7 @@ MX6_PAD_DECL(SD3_DAT4__SD3_DATA4,	0x069C, 0x02B4, 0, 0x0000, 0, 0)
 MX6_PAD_DECL(SD3_DAT4__UART2_TX_DATA,	0x069C, 0x02B4, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(SD3_DAT4__UART2_RX_DATA,	0x069C, 0x02B4, 1, 0x0928, 5, 0)
 MX6_PAD_DECL(SD3_DAT4__GPIO7_IO01,	0x069C, 0x02B4, 5, 0x0000, 0, 0)
-MX6_PAD_DECL(SD3_CMD__SD3_CMD,	0x06A0, 0x02B8, 16, 0x0000, 0, 0)
+MX6_PAD_DECL(SD3_CMD__SD3_CMD,		0x06A0, 0x02B8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(SD3_CMD__UART2_CTS_B,	0x06A0, 0x02B8, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(SD3_CMD__UART2_RTS_B,	0x06A0, 0x02B8, 1, 0x0924, 2, 0)
 MX6_PAD_DECL(SD3_CMD__FLEXCAN1_TX,	0x06A0, 0x02B8, 2, 0x0000, 0, 0)
@@ -924,7 +924,7 @@ MX6_PAD_DECL(NANDF_CS3__ESAI_TX1,	0x06D8, 0x02F0, 2, 0x0878, 1, 0)
 MX6_PAD_DECL(NANDF_CS3__EIM_ADDR26,	0x06D8, 0x02F0, 3, 0x0000, 0, 0)
 MX6_PAD_DECL(NANDF_CS3__GPIO6_IO16,	0x06D8, 0x02F0, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(NANDF_CS3__IPU2_SISG1,	0x06D8, 0x02F0, 6, 0x0000, 0, 0)
-MX6_PAD_DECL(SD4_CMD__SD4_CMD,	0x06DC, 0x02F4, 16, 0x0000, 0, 0)
+MX6_PAD_DECL(SD4_CMD__SD4_CMD,		0x06DC, 0x02F4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(SD4_CMD__NAND_RE_B,	0x06DC, 0x02F4, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(SD4_CMD__UART3_TX_DATA,	0x06DC, 0x02F4, 2, 0x0000, 0, 0)
 MX6_PAD_DECL(SD4_CMD__UART3_RX_DATA,	0x06DC, 0x02F4, 2, 0x0930, 2, 0)
@@ -1001,7 +1001,7 @@ MX6_PAD_DECL(SD1_DAT3__PWM1_OUT,	0x072C, 0x0344, 3, 0x0000, 0, 0)
 MX6_PAD_DECL(SD1_DAT3__WDOG2_B,	0x072C, 0x0344, 4, 0x0000, 0, 0)
 MX6_PAD_DECL(SD1_DAT3__GPIO1_IO21,	0x072C, 0x0344, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(SD1_DAT3__WDOG2_RESET_B_DEB,	0x072C, 0x0344, 6, 0x0000, 0, 0)
-MX6_PAD_DECL(SD1_CMD__SD1_CMD,	0x0730, 0x0348, 16, 0x0000, 0, 0)
+MX6_PAD_DECL(SD1_CMD__SD1_CMD,		0x0730, 0x0348, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(SD1_CMD__ECSPI5_MOSI,	0x0730, 0x0348, 1, 0x0830, 0, 0)
 MX6_PAD_DECL(SD1_CMD__PWM4_OUT,	0x0730, 0x0348, 2, 0x0000, 0, 0)
 MX6_PAD_DECL(SD1_CMD__GPT_COMPARE1,	0x0730, 0x0348, 3, 0x0000, 0, 0)
@@ -1022,7 +1022,7 @@ MX6_PAD_DECL(SD2_CLK__ECSPI5_SCLK,	0x073C, 0x0354, 1, 0x0828, 1, 0)
 MX6_PAD_DECL(SD2_CLK__KEY_COL5,	0x073C, 0x0354, 2, 0x08E8, 3, 0)
 MX6_PAD_DECL(SD2_CLK__AUD4_RXFS,	0x073C, 0x0354, 3, 0x07C0, 1, 0)
 MX6_PAD_DECL(SD2_CLK__GPIO1_IO10,	0x073C, 0x0354, 5, 0x0000, 0, 0)
-MX6_PAD_DECL(SD2_CMD__SD2_CMD,	0x0740, 0x0358, 16, 0x0000, 0, 0)
+MX6_PAD_DECL(SD2_CMD__SD2_CMD,		0x0740, 0x0358, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(SD2_CMD__ECSPI5_MOSI,	0x0740, 0x0358, 1, 0x0830, 1, 0)
 MX6_PAD_DECL(SD2_CMD__KEY_ROW5,	0x0740, 0x0358, 2, 0x08F4, 2, 0)
 MX6_PAD_DECL(SD2_CMD__AUD4_RXC,	0x0740, 0x0358, 3, 0x07BC, 1, 0)
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 6461c88b17e..a1aa36bc223 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -1,24 +1,32 @@
 if ARCH_MX6
 
+config MX6_SMP
+	select ARM_ERRATA_751472
+	select ARM_ERRATA_761320
+	select ARM_ERRATA_794072
+	select ARM_ERRATA_845369
+	bool
+
 config MX6
+	select ARM_ERRATA_743622 if !MX6UL
 	bool
 	default y
-	select ARM_ERRATA_743622 if !MX6UL
-	select ARM_ERRATA_751472 if !MX6UL
-	select ARM_ERRATA_761320 if !MX6UL
-	select ARM_ERRATA_794072 if !MX6UL
 	imply CMD_FUSE
 
 config MX6D
+	select MX6_SMP
 	bool
 
 config MX6DL
+	select MX6_SMP
 	bool
 
 config MX6Q
+	select MX6_SMP
 	bool
 
 config MX6QDL
+	select MX6_SMP
 	bool
 
 config MX6S
@@ -331,6 +339,11 @@ config TARGET_PCM058
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
+config TARGET_PFLA02
+	bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
+	select BOARD_LATE_INIT
+	select SUPPORT_SPL
+
 config TARGET_SECOMX6
 	bool "secomx6 boards"
 
@@ -428,6 +441,7 @@ source "board/freescale/mx6ul_14x14_evk/Kconfig"
 source "board/freescale/mx6ullevk/Kconfig"
 source "board/grinn/liteboard/Kconfig"
 source "board/phytec/pcm058/Kconfig"
+source "board/phytec/pfla02/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
 source "board/samtec/vining_2000/Kconfig"
diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c
index 1f2739e8645..0e019c42622 100644
--- a/arch/arm/mach-imx/mx6/clock.c
+++ b/arch/arm/mach-imx/mx6/clock.c
@@ -19,7 +19,7 @@ enum pll_clocks {
 	PLL_USBOTG,	/* OTG USB PLL */
 	PLL_ENET,	/* ENET PLL */
 	PLL_AUDIO,	/* AUDIO PLL */
-	PLL_VIDEO,	/* AUDIO PLL */
+	PLL_VIDEO,	/* VIDEO PLL */
 };
 
 struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index af316735ee8..9ede1f54352 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -114,6 +114,12 @@ u32 get_cpu_rev(void)
 #define OCOTP_CFG3_SPEED_528MHZ 1
 #define OCOTP_CFG3_SPEED_696MHZ 2
 
+/*
+ * For i.MX6ULL
+ */
+#define OCOTP_CFG3_SPEED_792MHZ 2
+#define OCOTP_CFG3_SPEED_900MHZ 3
+
 u32 get_cpu_speed_grade_hz(void)
 {
 	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -126,11 +132,22 @@ u32 get_cpu_speed_grade_hz(void)
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	val &= 0x3;
 
-	if (is_mx6ul() || is_mx6ull()) {
+	if (is_mx6ul()) {
 		if (val == OCOTP_CFG3_SPEED_528MHZ)
 			return 528000000;
 		else if (val == OCOTP_CFG3_SPEED_696MHZ)
-			return 69600000;
+			return 696000000;
+		else
+			return 0;
+	}
+
+	if (is_mx6ull()) {
+		if (val == OCOTP_CFG3_SPEED_528MHZ)
+			return 528000000;
+		else if (val == OCOTP_CFG3_SPEED_792MHZ)
+			return 792000000;
+		else if (val == OCOTP_CFG3_SPEED_900MHZ)
+			return 900000000;
 		else
 			return 0;
 	}
@@ -234,6 +251,10 @@ static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
 	u32 val, step, old, reg = readl(&anatop->reg_core);
 	u8 shift;
 
+	/* No LDO_SOC/PU/ARM */
+	if (is_mx6sll())
+		return 0;
+
 	if (mv < 725)
 		val = 0x00;	/* Power gated off */
 	else if (mv > 1450)
@@ -293,7 +314,7 @@ static void clear_mmdc_ch_mask(void)
 	reg = readl(&mxc_ccm->ccdr);
 
 	/* Clear MMDC channel mask */
-	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl())
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() || is_mx6sll())
 		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK);
 	else
 		reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
@@ -344,20 +365,10 @@ static void init_bandgap(void)
 	}
 }
 
-#ifdef CONFIG_MX6SL
-static void set_preclk_from_osc(void)
-{
-	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-	u32 reg;
-
-	reg = readl(&mxc_ccm->cscmr1);
-	reg |= MXC_CCM_CSCMR1_PER_CLK_SEL_MASK;
-	writel(reg, &mxc_ccm->cscmr1);
-}
-#endif
-
 int arch_cpu_init(void)
 {
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
 	init_aips();
 
 	/* Need to clear MMDC_CHx_MASK to make warm reset work. */
@@ -421,12 +432,14 @@ int arch_cpu_init(void)
 	}
 
 	/* Set perclk to source from OSC 24MHz */
-#if defined(CONFIG_MX6SL)
-	set_preclk_from_osc();
-#endif
+	if (is_mx6sl())
+		setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK);
 
 	imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
 
+	if (is_mx6sx())
+		setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL);
+
 	init_src();
 
 	return 0;
@@ -495,6 +508,10 @@ uint mmc_get_env_part(struct mmc *mmc)
 
 int board_postclk_init(void)
 {
+	/* NO LDO SOC on i.MX6SLL */
+	if (is_mx6sll())
+		return 0;
+
 	set_ldo_voltage(LDO_SOC, 1175);	/* Set VDDSOC to 1.175V */
 
 	return 0;
@@ -576,7 +593,7 @@ void s_init(void)
 	u32 mask528;
 	u32 reg, periph1, periph2;
 
-	if (is_mx6sx() || is_mx6ul() || is_mx6ull())
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll())
 		return;
 
 	/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 7152c847d0a..87bf105f385 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -31,7 +31,7 @@ U_BOOT_DEVICE(imx7_thermal) = {
 };
 #endif
 
-#ifdef CONFIG_IMX_RDC
+#if CONFIG_IS_ENABLED(IMX_RDC)
 /*
  * In current design, if any peripheral was assigned to both A7 and M4,
  * it will receive ipg_stop or ipg_wait when any of the 2 platforms enter
@@ -245,8 +245,9 @@ int arch_cpu_init(void)
 	mxs_dma_init();
 #endif
 
-	if (IS_ENABLED(CONFIG_IMX_RDC))
-		isolate_resource();
+#if CONFIG_IS_ENABLED(IMX_RDC)
+	isolate_resource();
+#endif
 
 	return 0;
 }