diff options
| author | Stephen Warren | 2016-09-15 12:19:39 -0600 |
|---|---|---|
| committer | Tom Warren | 2016-09-27 09:11:03 -0700 |
| commit | 6dca554f238d23d2c67873d850b7576e5971c5fd (patch) | |
| tree | bd9419b7fa9fd8d1b02dbc7df0b725a7b4dbe940 /arch | |
| parent | 002ddbffb6e51ea3291d7bf22eca6f847b40fa90 (diff) | |
ARM: tegra: fix ULPI PHY on Ventana and Seaboard
Commit ce02a71c2374 "tegra: dts: Sync tegra20 device tree files with
Linux" enabled the ULPI USB port on Ventana, but made no attempt to ensure
that U-Boot code could handle this. In practice, various code is missing,
and various configuration options are not enabled, which causes U-Boot to
hang when attempting to initialize this USB port. This patch enables ULPI
PHY support on Ventana, and adds the required pinmux setup for the port to
operate. Note that Ventana is so similar to Seaboard that this change is
made in the Seaboard board file, which is shared with Ventana.
Seaboard also has the ULPI USB port wired up in hardware, although to an
internal port that often doesn't have anything attached to it. However,
the DT nodes for the USB controller and PHY had different status property
values, so the port was not initialized by U-Boot. Fix this inconsistency,
and enable the ULPI port, just like in the Linux kernel DT. This likewise
requires enabling ULPI support in the Seaboard defconfig.
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/tegra20-seaboard.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts index 77f5bb51b02..341c7f35836 100644 --- a/arch/arm/dts/tegra20-seaboard.dts +++ b/arch/arm/dts/tegra20-seaboard.dts @@ -784,7 +784,7 @@ }; usb@c5004000 { - status = "disabled"; + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; |