Merge git://git.denx.de/u-boot-fsl-qoriq

14 files changed, 337 insertions, 57 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index a99b1c6a99b..b24462bede9 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -73,6 +73,7 @@ config ARCH_LS2080A
 	select SYS_FSL_ERRATUM_A009803
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010165
+	select SYS_FSL_ERRATUM_A009203
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
 
@@ -134,6 +135,8 @@ config FSL_LS_PPA
 choice
 	prompt "FSL Layerscape PPA firmware loading-media select"
 	depends on FSL_LS_PPA
+	default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+	default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
 	default SYS_LS_PPA_FW_IN_XIP
 
 config SYS_LS_PPA_FW_IN_XIP
@@ -142,13 +145,27 @@ config SYS_LS_PPA_FW_IN_XIP
 	  Say Y here if the PPA firmware locate at XIP flash, such
 	  as NOR or QSPI flash.
 
+config SYS_LS_PPA_FW_IN_MMC
+	bool "eMMC or SD Card"
+	help
+	  Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+	bool "NAND"
+	help
+	  Say Y here if the PPA firmware locate at NAND flash.
+
 endchoice
 
 config SYS_LS_PPA_FW_ADDR
 	hex "Address of PPA firmware loading from"
 	depends on FSL_LS_PPA
 	default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580a00000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
 	default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x500000 if SYS_LS_PPA_FW_IN_MMC
+	default 0x500000 if SYS_LS_PPA_FW_IN_NAND
+
 	help
 	  If the PPA firmware locate at XIP flash, such as NOR or
 	  QSPI flash, this address is a directly memory-mapped.
@@ -307,6 +324,9 @@ config SYS_FSL_ERRATUM_A008585
 config SYS_FSL_ERRATUM_A008850
 	bool
 
+config SYS_FSL_ERRATUM_A009203
+	bool
+
 config SYS_FSL_ERRATUM_A009635
 	bool
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 7e66ee08b56..cebbb0fec5e 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -89,6 +89,49 @@ static inline void early_mmu_setup(void)
 	set_sctlr(get_sctlr() | CR_M);
 }
 
+static void fix_pcie_mmu_map(void)
+{
+#ifdef CONFIG_LS2080A
+	unsigned int i;
+	u32 svr, ver;
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	svr = gur_in32(&gur->svr);
+	ver = SVR_SOC_VER(svr);
+
+	/* Fix PCIE base and size for LS2088A */
+	if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
+	    (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) {
+		for (i = 0; i < ARRAY_SIZE(final_map); i++) {
+			switch (final_map[i].phys) {
+			case CONFIG_SYS_PCIE1_PHYS_ADDR:
+				final_map[i].phys = 0x2000000000ULL;
+				final_map[i].virt = 0x2000000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+			case CONFIG_SYS_PCIE2_PHYS_ADDR:
+				final_map[i].phys = 0x2800000000ULL;
+				final_map[i].virt = 0x2800000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+			case CONFIG_SYS_PCIE3_PHYS_ADDR:
+				final_map[i].phys = 0x3000000000ULL;
+				final_map[i].virt = 0x3000000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+			case CONFIG_SYS_PCIE4_PHYS_ADDR:
+				final_map[i].phys = 0x3800000000ULL;
+				final_map[i].virt = 0x3800000000ULL;
+				final_map[i].size = 0x800000000ULL;
+				break;
+			default:
+				break;
+			}
+		}
+	}
+#endif
+}
+
 /*
  * The final tables look similar to early tables, but different in detail.
  * These tables are in DRAM. Sub tables are added to enable cache for
@@ -103,6 +146,9 @@ static inline void final_mmu_setup(void)
 	unsigned int el = current_el();
 	int index;
 
+	/* fix the final_map before filling in the block entries */
+	fix_pcie_mmu_map();
+
 	mem_map = final_map;
 
 	/* Update mapping for DDR to actual size */
@@ -436,7 +482,14 @@ int arch_early_init_r(void)
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
-	erratum_a009635();
+	u32 svr_dev_id;
+	/*
+	 * erratum A009635 is valid only for LS2080A SoC and
+	 * its personalitiesi
+	 */
+	svr_dev_id = get_svr() >> 16;
+	if (svr_dev_id == SVR_DEV_LS2080A)
+		erratum_a009635();
 #endif
 #if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
 	erratum_a009942_check_cpo();
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 26d4a303a53..762a95b945c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -387,8 +387,9 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_SYS_DPAA_FMAN
 	fdt_fixup_fman_firmware(blob);
 #endif
+#ifndef CONFIG_LS1012A
 	fsl_fdt_disable_usb(blob);
-
+#endif
 #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
 	fdt_fixup_gic(blob);
 #endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 7faa86c3fdf..955e0b74785 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -23,6 +23,11 @@ int xfi_dpmac[XFI8 + 1];
 int sgmii_dpmac[SGMII16 + 1];
 #endif
 
+__weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
+{
+	return;
+}
+
 int is_serdes_configured(enum srds_prtcl device)
 {
 	int ret = 0;
@@ -46,20 +51,22 @@ int is_serdes_configured(enum srds_prtcl device)
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-	u32 cfg = gur_in32(&gur->rcwsr[28]);
+	u32 cfg = 0;
 	int i;
 
 	switch (sd) {
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	case FSL_SRDS_1:
-		cfg &= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
-		cfg >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+		cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
+		cfg &= FSL_CHASSIS3_SRDS1_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
 		break;
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	case FSL_SRDS_2:
-		cfg &= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
-		cfg >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
+		cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
+		cfg &= FSL_CHASSIS3_SRDS2_PRTCL_MASK;
+		cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT;
 		break;
 #endif
 	default:
@@ -78,8 +85,8 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 	return -ENODEV;
 }
 
-void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
-		u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
+void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
+		 u32 sd_prctl_shift, u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 	u32 cfg;
@@ -90,7 +97,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 
 	memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
 
-	cfg = gur_in32(&gur->rcwsr[28]) & sd_prctl_mask;
+	cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask;
 	cfg >>= sd_prctl_shift;
 	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
 
@@ -106,28 +113,10 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 #ifdef CONFIG_FSL_MC_ENET
 			switch (lane_prtcl) {
 			case QSGMII_A:
-				wriop_init_dpmac(sd, 5, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 6, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 7, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 8, (int)lane_prtcl);
-				break;
 			case QSGMII_B:
-				wriop_init_dpmac(sd, 1, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 2, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 3, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 4, (int)lane_prtcl);
-				break;
 			case QSGMII_C:
-				wriop_init_dpmac(sd, 13, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 14, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 15, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 16, (int)lane_prtcl);
-				break;
 			case QSGMII_D:
-				wriop_init_dpmac(sd, 9, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 10, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 11, (int)lane_prtcl);
-				wriop_init_dpmac(sd, 12, (int)lane_prtcl);
+				wriop_init_dpmac_qsgmii(sd, (int)lane_prtcl);
 				break;
 			default:
 				if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
@@ -165,15 +154,17 @@ void fsl_serdes_init(void)
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	serdes_init(FSL_SRDS_1,
 		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
-		    FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK,
-		    FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT,
+		    FSL_CHASSIS3_SRDS1_REGSR,
+		    FSL_CHASSIS3_SRDS1_PRTCL_MASK,
+		    FSL_CHASSIS3_SRDS1_PRTCL_SHIFT,
 		    serdes1_prtcl_map);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	serdes_init(FSL_SRDS_2,
 		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
-		    FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK,
-		    FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT,
+		    FSL_CHASSIS3_SRDS2_REGSR,
+		    FSL_CHASSIS3_SRDS2_PRTCL_MASK,
+		    FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
 		    serdes2_prtcl_map);
 #endif
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index b68e87d6571..b35ad5fb6f0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <malloc.h>
 #include <config.h>
 #include <errno.h>
 #include <asm/system.h>
@@ -21,9 +22,17 @@
 #include <fsl_validate.h>
 #endif
 
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_NAND
+#include <nand.h>
+#elif defined(CONFIG_SYS_LS_PPA_FW_IN_MMC)
+#include <mmc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
 int ppa_init(void)
 {
-	const void *ppa_fit_addr;
+	void *ppa_fit_addr;
 	u32 *boot_loc_ptr_l, *boot_loc_ptr_h;
 	int ret;
 
@@ -34,10 +43,137 @@ int ppa_init(void)
 
 #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
 	ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
+	debug("%s: PPA image load from XIP\n", __func__);
+#else /* !CONFIG_SYS_LS_PPA_FW_IN_XIP */
+	size_t fw_length, fdt_header_len = sizeof(struct fdt_header);
+
+	/* Copy PPA image from MMC/SD/NAND to allocated memory */
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_MMC
+	struct mmc *mmc;
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	struct fdt_header *fitp;
+	u32 cnt;
+	u32 blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
+
+	debug("%s: PPA image load from eMMC/SD\n", __func__);
+
+	ret = mmc_initialize(gd->bd);
+	if (ret) {
+		printf("%s: mmc_initialize() failed\n", __func__);
+		return ret;
+	}
+	mmc = find_mmc_device(dev);
+	if (!mmc) {
+		printf("PPA: MMC cannot find device for PPA firmware\n");
+		return -ENODEV;
+	}
+
+	ret = mmc_init(mmc);
+	if (ret) {
+		printf("%s: mmc_init() failed\n", __func__);
+		return ret;
+	}
+
+	fitp = malloc(roundup(fdt_header_len, 512));
+	if (!fitp) {
+		printf("PPA: malloc failed for FIT header(size 0x%zx)\n",
+		       roundup(fdt_header_len, 512));
+		return -ENOMEM;
+	}
+
+	cnt = DIV_ROUND_UP(fdt_header_len, 512);
+	debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
+	      __func__, dev, blk, cnt);
+	ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
+	if (ret != cnt) {
+		free(fitp);
+		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	/* flush cache after read */
+	flush_cache((ulong)fitp, cnt * 512);
+
+	ret = fdt_check_header(fitp);
+	if (ret) {
+		free(fitp);
+		printf("%s: fdt_check_header() failed\n", __func__);
+		return ret;
+	}
+
+	fw_length = fdt_totalsize(fitp);
+	free(fitp);
+
+	fw_length = roundup(fw_length, 512);
+	ppa_fit_addr = malloc(fw_length);
+	if (!ppa_fit_addr) {
+		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
+		       fw_length);
+		return -ENOMEM;
+	}
+
+	cnt = DIV_ROUND_UP(fw_length, 512);
+	debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
+	      __func__, dev, blk, cnt);
+	ret = mmc->block_dev.block_read(&mmc->block_dev,
+					blk, cnt, ppa_fit_addr);
+	if (ret != cnt) {
+		free(ppa_fit_addr);
+		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	/* flush cache after read */
+	flush_cache((ulong)ppa_fit_addr, cnt * 512);
+
+#elif defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	struct fdt_header fit;
+
+	debug("%s: PPA image load from NAND\n", __func__);
+
+	nand_init();
+	ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
+		       &fdt_header_len, (u_char *)&fit);
+	if (ret == -EUCLEAN) {
+		printf("NAND read of PPA FIT header at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	ret = fdt_check_header(&fit);
+	if (ret) {
+		printf("%s: fdt_check_header() failed\n", __func__);
+		return ret;
+	}
+
+	fw_length = fdt_totalsize(&fit);
+
+	ppa_fit_addr = malloc(fw_length);
+	if (!ppa_fit_addr) {
+		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
+		       fw_length);
+		return -ENOMEM;
+	}
+
+	ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
+		       &fw_length, (u_char *)ppa_fit_addr);
+	if (ret == -EUCLEAN) {
+		free(ppa_fit_addr);
+		printf("NAND read of PPA firmware at offset 0x%x failed\n",
+		       CONFIG_SYS_LS_PPA_FW_ADDR);
+		return -EIO;
+	}
+
+	/* flush cache after read */
+	flush_cache((ulong)ppa_fit_addr, fw_length);
 #else
 #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
 #endif
 
+#endif
+
 #ifdef CONFIG_CHAIN_OF_TRUST
 	ppa_img_addr = (uintptr_t)ppa_fit_addr;
 	if (fsl_check_boot_mode_secure() != 0) {
@@ -65,5 +201,10 @@ int ppa_init(void)
 	      boot_loc_ptr_l, boot_loc_ptr_h);
 	ret = sec_firmware_init(ppa_fit_addr, boot_loc_ptr_l, boot_loc_ptr_h);
 
+#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
+	defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
+	free(ppa_fit_addr);
+#endif
+
 	return ret;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index b54a9379711..9e3cdd78af5 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -152,6 +152,7 @@ static void erratum_rcw_src(void)
  * This erratum requires setting glitch_en bit to enable
  * digital glitch filter to improve clock stability.
  */
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009203
 static void erratum_a009203(void)
 {
 	u8 __iomem *ptr;
@@ -178,6 +179,7 @@ static void erratum_a009203(void)
 #endif
 #endif
 }
+#endif
 
 void bypass_smmu(void)
 {
@@ -191,7 +193,9 @@ void fsl_lsch3_early_init_f(void)
 {
 	erratum_rcw_src();
 	init_early_memctl_regs();	/* tighten IFC timing */
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009203
 	erratum_a009203();
+#endif
 	erratum_a008514();
 	erratum_a008336();
 #ifdef CONFIG_CHAIN_OF_TRUST
diff --git a/arch/arm/dts/fsl-ls1012a.dtsi b/arch/arm/dts/fsl-ls1012a.dtsi
index ed5ea54a5ec..23b3cec4344 100644
--- a/arch/arm/dts/fsl-ls1012a.dtsi
+++ b/arch/arm/dts/fsl-ls1012a.dtsi
@@ -114,7 +114,7 @@
 			reg = <0x0 0x1550000 0x0 0x10000>,
 				<0x0 0x40000000 0x0 0x4000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			num-cs = <2>;
+			num-cs = <1>;
 			big-endian;
 			status = "disabled";
 		};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index d9d948e2ab7..70181c5077c 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -48,10 +48,10 @@ enum srds_prtcl {
 	SGMII14,
 	SGMII15,
 	SGMII16,
-	QSGMII_A, /* A indicates MACs 1-4 */
-	QSGMII_B, /* B indicates MACs 5-8 */
-	QSGMII_C, /* C indicates MACs 9-12 */
-	QSGMII_D, /* D indicates MACs 12-16 */
+	QSGMII_A,
+	QSGMII_B,
+	QSGMII_C,
+	QSGMII_D,
 	SERDES_PRCTL_COUNT
 };
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 08ea8fb8eff..80c421f7104 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -230,10 +230,19 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK	0x3f
 #define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT	18
 #define FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK	0x3f
+
+#if defined(CONFIG_ARCH_LS2080A)
 #define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK	0x00FF0000
 #define	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT	16
 #define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK	0xFF000000
 #define	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT	24
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT	FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR	29
+#define FSL_CHASSIS3_SRDS2_REGSR	29
+#endif
 #define RCW_SB_EN_REG_INDEX	9
 #define RCW_SB_EN_MASK		0x00000400
 
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ppa.h b/arch/arm/include/asm/arch-fsl-layerscape/ppa.h
index 1f1442b6f0a..da4098ebd32 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ppa.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/ppa.h
@@ -7,10 +7,7 @@
 #ifndef __FSL_PPA_H_
 #define __FSL_PPA_H_
 
-#define SEC_FIRMWARE_FIT_IMAGE		"firmware"
-#define SEC_FIRMEWARE_FIT_CNF_NAME	"config@1"
-#define SEC_FIRMWARE_TARGET_EL		2
-
+#ifdef CONFIG_FSL_LS_PPA
 int ppa_init(void);
-
+#endif
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
new file mode 100644
index 00000000000..b326fe5c403
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2017 NXP Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+#ifndef __FSL_STREAM_ID_H
+#define __FSL_STREAM_ID_H
+
+/*
+ * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices
+ * are not hardwired and are programmed by sw.  There are a limited number
+ * of stream IDs available, and the partitioning of them is scenario
+ * dependent. This header defines the partitioning between legacy, PCI,
+ * and DPAA1 devices.
+ *
+ * This partitioning can be customized in this file depending
+ * on the specific hardware config:
+ *
+ *  -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc)
+ *     -all legacy devices get a unique stream ID assigned and programmed in
+ *      their AMQR registers by u-boot
+ *
+ *  -PCIe
+ *     -there is a range of stream IDs set aside for PCI in this
+ *      file.  U-boot will scan the PCI bus and for each device discovered:
+ *         -allocate a streamID
+ *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
+ *         -set a msi-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
+ *          for more info on the msi-map definition)
+ *         -set a iommu-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
+ *          for more info on the iommu-map definition)
+ *
+ *  -DPAA1
+ *     - Stream ids for DPAA1 use are reserved for future usecase.
+ *
+ */
+
+
+#define FSL_INVALID_STREAM_ID		0
+
+/* legacy devices */
+#define FSL_USB1_STREAM_ID		1
+#define FSL_USB2_STREAM_ID		2
+#define FSL_USB3_STREAM_ID		3
+#define FSL_SDHC_STREAM_ID		4
+#define FSL_SATA_STREAM_ID		5
+#define FSL_QE_STREAM_ID		6
+#define FSL_QDMA_STREAM_ID		7
+#define FSL_EDMA_STREAM_ID		8
+#define FSL_ETR_STREAM_ID		9
+
+/* PCI - programmed in PEXn_LUT */
+#define FSL_PEX_STREAM_ID_START		11
+#define FSL_PEX_STREAM_ID_END		26
+
+/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */
+#define FSL_DPAA1_STREAM_ID_START	27
+#define FSL_DPAA1_STREAM_ID_END		63
+
+#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index ee28323f8ca..d7d527d8f4f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -8,11 +8,11 @@
 #define __FSL_STREAM_ID_H
 
 /*
- * Stream IDs on ls2080a devices are not hardwired and are
- * programmed by sw.  There are a limited number of stream IDs
- * available, and the partitioning of them is scenario dependent.
- * This header defines the partitioning between legacy, PCI,
- * and DPAA2 devices.
+ * Stream IDs on NXP Chassis-3 (for example ls2080a, ls1088a, ls2088a)
+ * devices are not hardwired and are programmed by sw. There are a limited
+ * number of stream IDs available, and the partitioning of them is scenario
+ * dependent. This header defines the partitioning between legacy,
+ * PCI, and DPAA2 devices.
  *
  * This partitioning can be customized in this file depending
  * on the specific hardware config:
@@ -29,6 +29,9 @@
  *         -set a msi-map entry in the PEXn controller node in the
  *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
  *          for more info on the msi-map definition)
+ *         -set a iommu-map entry in the PEXn controller node in the
+ *          device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
+ *          for more info on the iommu-map definition)
  *
  *  -DPAA2
  *     -u-boot will allocate a range of stream IDs to be used by the Management
@@ -36,7 +39,7 @@
  *     -the MC is responsible for allocating and setting up 'isolation context
  *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
  *
- * On ls2080a SoCs stream IDs are programmed in AMQ registers (32-bits) for
+ * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for
  * each of the different bus masters.  The relationship between
  * the AMQ registers and stream IDs is defined in the table below:
  *          AMQ bit    streamID bit
diff --git a/arch/arm/include/asm/armv8/sec_firmware.h b/arch/arm/include/asm/armv8/sec_firmware.h
index 5ae00fa8d20..bcdb1b00720 100644
--- a/arch/arm/include/asm/armv8/sec_firmware.h
+++ b/arch/arm/include/asm/armv8/sec_firmware.h
@@ -7,10 +7,6 @@
 #ifndef __SEC_FIRMWARE_H_
 #define __SEC_FIRMWARE_H_
 
-#ifdef CONFIG_FSL_LS_PPA
-#include <asm/arch/ppa.h>
-#endif
-
 int sec_firmware_init(const void *, u32 *, u32 *);
 int _sec_firmware_entry(const void *, u32 *, u32 *);
 bool sec_firmware_is_valid(const void *);
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index fd627c0874e..d98a1e8f89d 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -38,11 +38,11 @@
  * in boot ROM of the SoC.
  * The feature is only applicable in case of NOR boot and is
  * not applicable in case of RAMBOOT (NAND, SD, SPI).
+ * For LS, this feature is available for all device if IE Table
+ * is copied to XIP memory
+ * Also, for LS, ISBC doesn't verify this table.
  */
-#ifndef CONFIG_ESBC_HDR_LS
-/* Current Key EXT feature not available in LS ESBC Header */
 #define CONFIG_FSL_ISBC_KEY_EXT
-#endif
 
 #endif
 
@@ -112,6 +112,8 @@
 #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
 #ifdef CONFIG_LS1043A
 #define CONFIG_SYS_LS_PPA_ESBC_ADDR	0x600c0000
+#elif defined(CONFIG_FSL_LSCH3)
+#define CONFIG_SYS_LS_PPA_ESBC_ADDR     0x580c40000
 #endif
 #else
 #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"