diff options
| author | Bryan Brattlof | 2023-12-29 11:47:13 -0600 |
|---|---|---|
| committer | Tom Rini | 2024-01-03 08:36:37 -0500 |
| commit | 7f66ec50adc9874e2beccaf371cc2fe05cbf527e (patch) | |
| tree | ebf6e6a8d8f81c601e18a4ede388f5222c226152 /arch | |
| parent | 52d87efd0203a13cee5568e55767a92959fbe728 (diff) | |
arm: dts: k3-am654: remove duplicate sdhci1 pinmux node
With the Linux and U-Boot board dtb files unified, we now have a
duplicate sdhci1 pinmux node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/k3-am654-r5-base-board.dts | 23 |
1 files changed, 8 insertions, 15 deletions
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index f28245b12b6..9d7467acd30 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -140,19 +140,6 @@ }; &main_pmx0 { - main_mmc1_pins_default: main_mmc1_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ - AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ - AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ - AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ - AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ - AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ - AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ - AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ - >; - }; - usb0_pins_default: usb0_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ @@ -180,12 +167,18 @@ /delete-property/ power-domains; }; +/* + * MMC is probed to pull in firmware, so any clock + * or power-domain operation will fail as we do not + * have the firmware running at this point. Delete the + * power-domain properties to avoid making calls to + * SYSFW before it is loaded. Public ROM has already + * set it up for us anyway. + */ &sdhci1 { clock-names = "clk_xin"; clocks = <&clk_200mhz>; - pinctrl-0 = <&main_mmc1_pins_default>; /delete-property/ power-domains; - ti,driver-strength-ohm = <50>; }; &wkup_i2c0 { |