sunxi: Remove options and setup code for I2C2-I2C4

These options are not currently enabled anywhere. Any new users should
use DM clocks and pinctrl.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

3 files changed, 1 insertions, 40 deletions

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 2aa6bbb1785..cf5afdac6a2 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -141,8 +141,6 @@ enum sunxi_gpio_number {
 #define SUN4I_GPB_TWI0		2
 #define SUN4I_GPB_TWI1		2
 #define SUN5I_GPB_TWI1		2
-#define SUN4I_GPB_TWI2		2
-#define SUN5I_GPB_TWI2		2
 #define SUN8I_V3S_GPB_TWI0	2
 #define SUN4I_GPB_UART0		2
 #define SUN5I_GPB_UART0		2
@@ -164,8 +162,6 @@ enum sunxi_gpio_number {
 #define SUNXI_GPD_PWM		2
 
 #define SUNIV_GPE_UART0		5
-#define SUN8I_GPE_TWI2		3
-#define SUN50I_GPE_TWI2		3
 
 #define SUNXI_GPF_SDC0		2
 #define SUNXI_GPF_UART0		4
@@ -176,7 +172,6 @@ enum sunxi_gpio_number {
 #define SUN6I_GPG_SDC1		2
 #define SUN8I_GPG_SDC1		2
 #define SUN8I_GPG_UART1		2
-#define SUN6I_GPG_TWI3		2
 #define SUN5I_GPG_UART1		4
 
 #define SUN6I_GPH_PWM		2
@@ -188,15 +183,12 @@ enum sunxi_gpio_number {
 #define SUN6I_GPH_TWI1		2
 #define SUN8I_GPH_TWI1		2
 #define SUN50I_GPH_TWI1		2
-#define SUN6I_GPH_TWI2		2
 #define SUN6I_GPH_UART0		2
 #define SUN9I_GPH_UART0		2
 #define SUN50I_H6_GPH_UART0	2
 #define SUN50I_H616_GPH_UART0	2
 
 #define SUNXI_GPI_SDC3		2
-#define SUN7I_GPI_TWI3		3
-#define SUN7I_GPI_TWI4		3
 
 #define SUN6I_GPL0_R_P2WI_SCK	3
 #define SUN6I_GPL1_R_P2WI_SDA	3
diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
index 1cb2ba6b0ab..3525f22e7df 100644
--- a/arch/arm/include/asm/arch-sunxi/i2c.h
+++ b/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -13,17 +13,8 @@
 #ifdef CONFIG_I2C1_ENABLE
 #define CONFIG_I2C_MVTWSI_BASE1	SUNXI_TWI1_BASE
 #endif
-#ifdef CONFIG_I2C2_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE2	SUNXI_TWI2_BASE
-#endif
-#ifdef CONFIG_I2C3_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE3	SUNXI_TWI3_BASE
-#endif
-#ifdef CONFIG_I2C4_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE4	SUNXI_TWI4_BASE
-#endif
 #ifdef CONFIG_R_I2C_ENABLE
-#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
+#define CONFIG_I2C_MVTWSI_BASE2 SUNXI_R_TWI_BASE
 #endif
 
 /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 73da6b8f615..e5ed1d97e89 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -755,20 +755,6 @@ config I2C1_ENABLE
 	---help---
 	See I2C0_ENABLE help text.
 
-config I2C2_ENABLE
-	bool "Enable I2C/TWI controller 2"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-
-if MACH_SUN6I || MACH_SUN7I
-config I2C3_ENABLE
-	bool "Enable I2C/TWI controller 3"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-endif
-
 if SUNXI_GEN_SUN6I || SUN50I_GEN_H6
 config R_I2C_ENABLE
 	bool "Enable the PRCM I2C/TWI controller"
@@ -779,14 +765,6 @@ config R_I2C_ENABLE
 	Set this to y to enable the I2C controller which is part of the PRCM.
 endif
 
-if MACH_SUN7I
-config I2C4_ENABLE
-	bool "Enable I2C/TWI controller 4"
-	select CMD_I2C
-	---help---
-	See I2C0_ENABLE help text.
-endif
-
 config AXP_GPIO
 	bool "Enable support for gpio-s on axp PMICs"
 	depends on AXP_PMIC_BUS