rockchip: rk3399-nanopi-4: Sync DT from v6.8 and update defconfig

Sync rk3399-nanopi-4 related device tree from Linux kernel v6.8.

Add DM_RESET=y to support reset signals.

Add PCI=y, CMD_PCI=y and NVME_PCI=y to support PCIe and NVMe boot.

Add AHCI=y, SCSI_AHCI=y, AHCI_PCI=y and SCSI=y to support M4 SATA HAT.

Add ROCKCHIP_IODOMAIN=y to configure io-domain voltage.

Add MMC_SDHCI_SDMA=y to use DMA transfer for eMMC.

Add PHY_REALTEK=y and DM_ETH_PHY=y to support ethernet PHY.

Add PHY_ROCKCHIP_INNO_USB2=y and PHY_ROCKCHIP_TYPEC=y to support USB PHY.

Remove REGULATOR_PWM=y, boards does not use pwm-regulator compatible.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

6 files changed, 13 insertions, 61 deletions

diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
index 452728b82e4..3bf8f959e42 100644
--- a/arch/arm/dts/rk3399-nanopc-t4.dts
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -39,7 +39,7 @@
 		keyup-threshold-microvolt = <1800000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
index 60358ab8c7d..e9cf71f224a 100644
--- a/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4-2gb.dts
@@ -10,57 +10,4 @@
  */
 
 /dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi M4";
-	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
-
-	vdd_5v: vdd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc5v0_core: vcc5v0-core {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_core";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vdd_5v>;
-	};
-
-	vcc5v0_usb1: vcc5v0-usb1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb1";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	vcc5v0_usb2: vcc5v0-usb2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb2";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&vcc3v3_sys {
-	vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
-	phy-supply = <&vcc5v0_usb1>;
-};
-
-&u2phy1_host {
-	phy-supply = <&vcc5v0_usb2>;
-};
-
-&vbus_typec {
-	regulator-always-on;
-	vin-supply = <&vdd_5v>;
-};
+#include "rk3399-nanopi-m4.dts"
diff --git a/arch/arm/dts/rk3399-nanopi-m4b.dts b/arch/arm/dts/rk3399-nanopi-m4b.dts
index 72182c58cc4..65cb21837b0 100644
--- a/arch/arm/dts/rk3399-nanopi-m4b.dts
+++ b/arch/arm/dts/rk3399-nanopi-m4b.dts
@@ -19,7 +19,7 @@
 		keyup-threshold-microvolt = <1500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "Recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <18000>;
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index cef4d18b599..fe5b5261001 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@
 	gpio-keys {
 		pinctrl-0 = <&reset_button_pin>;
 
-		/delete-node/ power;
+		/delete-node/ key-power;
 
-		reset {
+		key-reset {
 			debounce-interval = <50>;
 			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
 			label = "reset";
diff --git a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
index e0d7a518dfc..75736124996 100644
--- a/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4-u-boot.dtsi
@@ -20,3 +20,7 @@
 &vcc3v0_sd {
 	bootph-pre-ram;
 };
+
+&vcc_sdio {
+	regulator-init-microvolt = <3000000>;
+};
diff --git a/arch/arm/dts/rk3399-nanopi4.dtsi b/arch/arm/dts/rk3399-nanopi4.dtsi
index 8c0ff6c96e0..b7f1e47978a 100644
--- a/arch/arm/dts/rk3399-nanopi4.dtsi
+++ b/arch/arm/dts/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
@@ -111,7 +112,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key>;
 
-		power {
+		key-power {
 			debounce-interval = <100>;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Key Power";
@@ -167,6 +168,7 @@
 };
 
 &emmc_phy {
+	rockchip,enable-strobe-pulldown;
 	status = "okay";
 };
 
@@ -267,7 +269,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -374,7 +376,6 @@
 			vcc_sdio: LDO_REG4 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-init-microvolt = <3000000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vcc_sdio";