Merge tag 'fsl-qoriq-2024-4-24' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq

- move to OF_UPSTREAM for sl28

5 files changed, 0 insertions, 494 deletions

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
deleted file mode 100644
index 7cd29ab970d..00000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var1.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 1 which has one ethernet port. It is
- * different than the base variant, which also has one port, but here the
- * port is connected via RGMII. This port is not TSN aware.
- * None of the  four SerDes lanes are used by the module, instead they are
- * all led out to the carrier for customer use.
- *
- * Copyright (C) 2021 Michael Walle <michael@walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-#include <dt-bindings/net/qca-ar803x.h>
-
-/ {
-	model = "Kontron SMARC-sAL28 (4 Lanes)";
-	compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
-	/* Delete unused phy node */
-	/delete-node/ ethernet-phy@5;
-
-	phy0: ethernet-phy@4 {
-		reg = <0x4>;
-		eee-broken-1000t;
-		eee-broken-100tx;
-		qca,clk-out-frequency = <125000000>;
-		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-		qca,keep-pll-enabled;
-		vddio-supply = <&vddio>;
-
-		vddio: vddio-regulator {
-			regulator-name = "VDDIO";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vddh: vddh-regulator {
-			regulator-name = "VDDH";
-		};
-	};
-};
-
-&enetc_port0 {
-	status = "disabled";
-	/* Delete the phy-handle to the old phy0 label */
-	/delete-property/ phy-handle;
-};
-
-&enetc_port1 {
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
deleted file mode 100644
index 330e34f933a..00000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 2 which has two ethernet ports. These
- * ports are connected to the internal switch.
- *
- * Copyright (C) 2021 Michael Walle <michael@walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-
-/ {
-	model = "Kontron SMARC-sAL28 (TSN-on-module)";
-	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
-	phy1: ethernet-phy@4 {
-		reg = <0x4>;
-		eee-broken-1000t;
-		eee-broken-100tx;
-	};
-};
-
-&enetc_port0 {
-	status = "disabled";
-	/*
-	 * In the base device tree the PHY at address 5 was assigned for
-	 * this port. On this module this PHY is connected to a switch
-	 * port instead. Therefore, delete the phy-handle property here.
-	 */
-	/delete-property/ phy-handle;
-};
-
-&enetc_port2 {
-	status = "okay";
-};
-
-&mscc_felix {
-	status = "okay";
-};
-
-&mscc_felix_port0 {
-	label = "swp0";
-	managed = "in-band-status";
-	phy-handle = <&phy0>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&mscc_felix_port1 {
-	label = "swp1";
-	managed = "in-band-status";
-	phy-handle = <&phy1>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&mscc_felix_port4 {
-	ethernet = <&enetc_port2>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
deleted file mode 100644
index 0c8b2af41a6..00000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var3.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * Copyright (C) 2019 Michael Walle <michael@walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-
-/ {
-	model = "Kontron SMARC-sAL28 (Single PHY)";
-	compatible = "kontron,sl28-var3", "kontron,sl28", "fsl,ls1028a";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
deleted file mode 100644
index 9b5e92fb753..00000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var4.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * This is for the network variant 4 which has two ethernet ports. It
- * extends the base and provides one more port connected via RGMII.
- *
- * Copyright (C) 2021 Michael Walle <michael@walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a-kontron-sl28.dts"
-#include <dt-bindings/net/qca-ar803x.h>
-
-/ {
-	model = "Kontron SMARC-sAL28 (Dual PHY)";
-	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
-};
-
-&enetc_mdio_pf3 {
-	phy1: ethernet-phy@4 {
-		reg = <0x4>;
-		eee-broken-1000t;
-		eee-broken-100tx;
-		qca,clk-out-frequency = <125000000>;
-		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
-		qca,keep-pll-enabled;
-		vddio-supply = <&vddio>;
-
-		vddio: vddio-regulator {
-			regulator-name = "VDDIO";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vddh: vddh-regulator {
-			regulator-name = "VDDH";
-		};
-	};
-};
-
-&enetc_port1 {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
deleted file mode 100644
index ab713b4949b..00000000000
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree file for the Kontron SMARC-sAL28 board.
- *
- * Copyright (C) 2021 Michael Walle <michael@walle.cc>
- *
- */
-
-/dts-v1/;
-#include "fsl-ls1028a.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Kontron SMARC-sAL28";
-	compatible = "kontron,sl28", "fsl,ls1028a";
-
-	aliases {
-		crypto = &crypto;
-		serial0 = &duart0;
-		serial1 = &duart1;
-		serial2 = &lpuart1;
-		spi0 = &fspi;
-		spi1 = &dspi2;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc;
-		rtc0 = &rtc;
-		rtc1 = &ftm_alarm0;
-	};
-
-	buttons0 {
-		compatible = "gpio-keys";
-
-		power-button {
-			interrupts-extended = <&sl28cpld_intc
-					       4 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_POWER>;
-			label = "Power";
-		};
-
-		sleep-button {
-			interrupts-extended = <&sl28cpld_intc
-					       5 IRQ_TYPE_EDGE_BOTH>;
-			linux,code = <KEY_SLEEP>;
-			label = "Sleep";
-		};
-	};
-
-	buttons1 {
-		compatible = "gpio-keys-polled";
-		poll-interval = <200>;
-
-		lid-switch {
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>;
-			label = "Lid";
-		};
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&dspi2 {
-	status = "okay";
-};
-
-&duart0 {
-	status = "okay";
-};
-
-&duart1 {
-	status = "okay";
-};
-
-&enetc_mdio_pf3 {
-	phy0: ethernet-phy@5 {
-		reg = <0x5>;
-		eee-broken-1000t;
-		eee-broken-100tx;
-	};
-};
-
-&enetc_port0 {
-	phy-handle = <&phy0>;
-	phy-mode = "sgmii";
-	managed = "in-band-status";
-	status = "okay";
-};
-
-&esdhc {
-	sd-uhs-sdr104;
-	sd-uhs-sdr50;
-	sd-uhs-sdr25;
-	sd-uhs-sdr12;
-	status = "okay";
-};
-
-&esdhc1 {
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&fspi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		m25p,fast-read;
-		spi-max-frequency = <133000000>;
-		reg = <0>;
-		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
-		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
-		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x000000 0x010000>;
-				label = "rcw";
-				read-only;
-			};
-
-			partition@10000 {
-				reg = <0x010000 0x1d0000>;
-				label = "failsafe bootloader";
-				read-only;
-			};
-
-			partition@200000 {
-				reg = <0x200000 0x010000>;
-				label = "configuration store";
-			};
-
-			partition@210000 {
-				reg = <0x210000 0x1d0000>;
-				label = "bootloader";
-			};
-
-			partition@3e0000 {
-				reg = <0x3e0000 0x020000>;
-				label = "bootloader environment";
-			};
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "TDO", "TCK",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "TMS", "TDI",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c0 {
-	status = "okay";
-
-	rtc: rtc@32 {
-		compatible = "microcrystal,rv8803";
-		reg = <0x32>;
-	};
-
-	sl28cpld@4a {
-		compatible = "kontron,sl28cpld";
-		reg = <0x4a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		watchdog@4 {
-			compatible = "kontron,sl28cpld-wdt";
-			reg = <0x4>;
-			kontron,assert-wdt-timeout-pin;
-		};
-
-		hwmon@b {
-			compatible = "kontron,sl28cpld-fan";
-			reg = <0xb>;
-		};
-
-		sl28cpld_pwm0: pwm@c {
-			compatible = "kontron,sl28cpld-pwm";
-			reg = <0xc>;
-			#pwm-cells = <2>;
-		};
-
-		sl28cpld_pwm1: pwm@e {
-			compatible = "kontron,sl28cpld-pwm";
-			reg = <0xe>;
-			#pwm-cells = <2>;
-		};
-
-		sl28cpld_gpio0: gpio@10 {
-			compatible = "kontron,sl28cpld-gpio";
-			reg = <0x10>;
-			interrupts-extended = <&gpio2 6
-					       IRQ_TYPE_EDGE_FALLING>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-line-names =
-				"GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
-				"GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
-				"GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
-				"GPIO6_TACHIN", "GPIO7";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sl28cpld_gpio1: gpio@15 {
-			compatible = "kontron,sl28cpld-gpio";
-			reg = <0x15>;
-			interrupts-extended = <&gpio2 6
-					       IRQ_TYPE_EDGE_FALLING>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-line-names =
-				"GPIO8", "GPIO9", "GPIO10", "GPIO11",
-				"", "", "", "";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sl28cpld_gpio2: gpio@1a {
-			compatible = "kontron,sl28cpld-gpo";
-			reg = <0x1a>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-line-names =
-				"LCD0 voltage enable",
-				"LCD0 backlight enable",
-				"eMMC reset", "LVDS bridge reset",
-				"LVDS bridge power-down",
-				"SDIO power enable",
-				"", "";
-		};
-
-		sl28cpld_gpio3: gpio@1b {
-			compatible = "kontron,sl28cpld-gpi";
-			reg = <0x1b>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-line-names =
-				"Power button", "Force recovery", "Sleep",
-				"Battery low", "Lid state", "Charging",
-				"Charger present", "";
-		};
-
-		sl28cpld_intc: interrupt-controller@1c {
-			compatible = "kontron,sl28cpld-intc";
-			reg = <0x1c>;
-			interrupts-extended = <&gpio2 6
-					       IRQ_TYPE_EDGE_FALLING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
-
-&lpuart1 {
-	status = "okay";
-};