arm: mvebu: Print CPU and SDRAM frequency upon startup

With this patch, the CPU and the DDR frequencies will get printed in the
U-Boot startup messages. Resulting in such a log:

U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100)

SoC:   MV78460-B0 at 1600 MHz
I2C:   ready
DRAM:  4 GiB (800 MHz, ECC not enabled)
...

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>

3 files changed, 113 insertions, 8 deletions

diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index c9b9c77ec49..6ea558c69fd 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -60,10 +60,95 @@ int mvebu_soc_family(void)
 }
 
 #if defined(CONFIG_DISPLAY_CPUINFO)
+
+#if defined(CONFIG_ARMADA_38X)
+/* SAR values for Armada 38x */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18600))
+#define SAR_CPU_FREQ_OFFS	10
+#define SAR_CPU_FREQ_MASK	(0x1f << SAR_CPU_FREQ_OFFS)
+
+struct sar_freq_modes sar_freq_tab[] = {
+	{  0x0,  0x0,  666, 333, 333 },
+	{  0x2,  0x0,  800, 400, 400 },
+	{  0x4,  0x0, 1066, 533, 533 },
+	{  0x6,  0x0, 1200, 600, 600 },
+	{  0x8,  0x0, 1332, 666, 666 },
+	{  0xc,  0x0, 1600, 800, 800 },
+	{ 0xff, 0xff,    0,   0,   0 }	/* 0xff marks end of array */
+};
+#else
+/* SAR values for Armada XP */
+#define CONFIG_SAR_REG		(MVEBU_REGISTER(0x18230))
+#define CONFIG_SAR2_REG		(MVEBU_REGISTER(0x18234))
+#define SAR_CPU_FREQ_OFFS	21
+#define SAR_CPU_FREQ_MASK	(0x7 << SAR_CPU_FREQ_OFFS)
+#define SAR_FFC_FREQ_OFFS	24
+#define SAR_FFC_FREQ_MASK	(0xf << SAR_FFC_FREQ_OFFS)
+#define SAR2_CPU_FREQ_OFFS	20
+#define SAR2_CPU_FREQ_MASK	(0x1 << SAR2_CPU_FREQ_OFFS)
+
+struct sar_freq_modes sar_freq_tab[] = {
+	{  0xa,  0x5,  800, 400, 400 },
+	{  0x1,  0x5, 1066, 533, 533 },
+	{  0x2,  0x5, 1200, 600, 600 },
+	{  0x2,  0x9, 1200, 600, 400 },
+	{  0x3,  0x5, 1333, 667, 667 },
+	{  0x4,  0x5, 1500, 750, 750 },
+	{  0x4,  0x9, 1500, 750, 500 },
+	{  0xb,  0x9, 1600, 800, 533 },
+	{  0xb,  0xa, 1600, 800, 640 },
+	{  0xb,  0x5, 1600, 800, 800 },
+	{ 0xff, 0xff,    0,   0,   0 }	/* 0xff marks end of array */
+};
+#endif
+
+void get_sar_freq(struct sar_freq_modes *sar_freq)
+{
+	u32 val;
+	u32 freq;
+	int i;
+
+	val = readl(CONFIG_SAR_REG);	/* SAR - Sample At Reset */
+	freq = (val & SAR_CPU_FREQ_MASK) >> SAR_CPU_FREQ_OFFS;
+#if !defined(CONFIG_ARMADA_38X)
+	/*
+	 * Shift CPU0 clock frequency select bit from SAR2 register
+	 * into correct position
+	 */
+	freq |= ((readl(CONFIG_SAR2_REG) & SAR2_CPU_FREQ_MASK)
+		 >> SAR2_CPU_FREQ_OFFS) << 3;
+#endif
+	for (i = 0; sar_freq_tab[i].val != 0xff; i++) {
+		if (sar_freq_tab[i].val == freq) {
+#if defined(CONFIG_ARMADA_38X)
+			*sar_freq = sar_freq_tab[i];
+			return;
+#else
+			int k;
+			u8 ffc;
+
+			ffc = (val & SAR_FFC_FREQ_MASK) >>
+				SAR_FFC_FREQ_OFFS;
+			for (k = i; sar_freq_tab[k].ffc != 0xff; k++) {
+				if (sar_freq_tab[k].ffc == ffc) {
+					*sar_freq = sar_freq_tab[k];
+					return;
+				}
+			}
+			i = k;
+#endif
+		}
+	}
+
+	/* SAR value not found, return 0 for frequencies */
+	*sar_freq = sar_freq_tab[i - 1];
+}
+
 int print_cpuinfo(void)
 {
 	u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff;
 	u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff;
+	struct sar_freq_modes sar_freq;
 
 	puts("SoC:   ");
 
@@ -91,13 +176,13 @@ int print_cpuinfo(void)
 	if (mvebu_soc_family() == MVEBU_SOC_AXP) {
 		switch (revid) {
 		case 1:
-			puts("A0\n");
+			puts("A0");
 			break;
 		case 2:
-			puts("B0\n");
+			puts("B0");
 			break;
 		default:
-			printf("?? (%x)\n", revid);
+			printf("?? (%x)", revid);
 			break;
 		}
 	}
@@ -105,17 +190,20 @@ int print_cpuinfo(void)
 	if (mvebu_soc_family() == MVEBU_SOC_A38X) {
 		switch (revid) {
 		case MV_88F68XX_Z1_ID:
-			puts("Z1\n");
+			puts("Z1");
 			break;
 		case MV_88F68XX_A0_ID:
-			puts("A0\n");
+			puts("A0");
 			break;
 		default:
-			printf("?? (%x)\n", revid);
+			printf("?? (%x)", revid);
 			break;
 		}
 	}
 
+	get_sar_freq(&sar_freq);
+	printf(" at %d MHz\n", sar_freq.p_clk);
+
 	return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */
diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c
index ddc5b7ee3ea..059151a4b57 100644
--- a/arch/arm/mach-mvebu/dram.c
+++ b/arch/arm/mach-mvebu/dram.c
@@ -292,11 +292,18 @@ void dram_init_banksize(void)
 	}
 }
 
+#if defined(CONFIG_ARMADA_XP)
 void board_add_ram_info(int use_default)
 {
+	struct sar_freq_modes sar_freq;
+
+	get_sar_freq(&sar_freq);
+	printf(" (%d MHz, ", sar_freq.d_clk);
+
 	if (ecc_enabled())
-		printf(" (ECC");
+		printf("ECC");
 	else
-		printf(" (ECC not");
+		printf("ECC not");
 	printf(" enabled)");
 }
+#endif
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 5e8bf0c4ce0..47f45c1512a 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -106,6 +106,14 @@ struct kwgpio_registers {
 	u32 irq_level;
 };
 
+struct sar_freq_modes {
+	u8 val;
+	u8 ffc;		/* Fabric Frequency Configuration */
+	u32 p_clk;
+	u32 nb_clk;
+	u32 d_clk;
+};
+
 /* Needed for dynamic (board-specific) mbus configuration */
 extern struct mvebu_mbus_state mbus_state;
 
@@ -123,6 +131,8 @@ void return_to_bootrom(void);
 
 int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks);
 
+void get_sar_freq(struct sar_freq_modes *sar_freq);
+
 /*
  * Highspeed SERDES PHY config init, ported from bin_hdr
  * to mainline U-Boot