diff options
| author | Chris Packham | 2018-06-03 16:21:27 +1200 |
|---|---|---|
| committer | Stefan Roese | 2018-06-05 07:29:09 +0200 |
| commit | 54e3316ffa46bd81e55216cd5aa5f087e9de9f8f (patch) | |
| tree | d877199099dd837553dc8676931ee05eb2a7fb4e /board/alliedtelesis/SBx81LIFKW | |
| parent | 87a62bce28a61199f7e51a39ec7f441af5a313cc (diff) | |
ARM: kirkwood: SBx81LIFKW: Enable network hardware
The SBx81LIFKW boards connect to the internal chassis management network
via a Marvell 88e6097 L2 switch. The chassis connections are direct
serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
the CPU MAC.
For debugging purposes ports 0 and 1 are also taken out to headers on
the board. Because the debug interfaces are sometimes connected to with
straight ribbon cables we need to run them at 10Mbps.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/alliedtelesis/SBx81LIFKW')
| -rw-r--r-- | board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 14 |
1 files changed, 12 insertions, 2 deletions
diff --git a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c index 3cacdc83723..e58bbf07ef1 100644 --- a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c +++ b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c @@ -164,16 +164,26 @@ int board_init(void) return 0; } -#ifdef CONFIG_MV88E61XX_SWITCH -/* Configure and enable Switch and PHY */ +#ifdef CONFIG_RESET_PHY_R +/* automatically defined by kirkwood config.h */ void reset_phy(void) { +} +#endif + +#ifdef CONFIG_MV88E61XX_SWITCH +int mv88e61xx_hw_reset(struct phy_device *phydev) +{ /* Ensure the 88e6097 gets at least 10ms Reset */ kw_gpio_set_value(MV88E6097_RESET, 0); mdelay(20); kw_gpio_set_value(MV88E6097_RESET, 1); mdelay(20); + + phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + + return 0; } #endif |