integrator: merge integratorap and integratorcp

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>

7 files changed, 1242 insertions, 0 deletions

diff --git a/board/armltd/integrator/Makefile b/board/armltd/integrator/Makefile
new file mode 100644
index 00000000000..14d64b7e88d
--- /dev/null
+++ b/board/armltd/integrator/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004
+# ARM Ltd.
+# Philippe Robin, <philippe.robin@arm.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+SOBJS-y	:= lowlevel_init.o
+
+COBJS-y	:= integrator.o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS-y += timer.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+COBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(COBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(COBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/integrator/config.mk b/board/armltd/integrator/config.mk
new file mode 100644
index 00000000000..25b79b3e793
--- /dev/null
+++ b/board/armltd/integrator/config.mk
@@ -0,0 +1,5 @@
+#
+# image should be loaded at 0x01000000
+#
+
+TEXT_BASE = 0x01000000
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
new file mode 100644
index 00000000000..a46deea4480
--- /dev/null
+++ b/board/armltd/integrator/integrator.c
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#ifdef CONFIG_PCI
+#include <netdev.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void peripheral_power_enable (void);
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+	printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	/* arch number of Integrator Board */
+#ifdef CONFIG_ARCH_CINTEGRATOR
+	gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
+#else
+	gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
+#endif
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x00000100;
+
+	gd->flags = 0;
+
+#ifdef CONFIG_CM_REMAP
+extern void cm_remap(void);
+	cm_remap();	/* remaps writeable memory to 0x00000000 */
+#endif
+
+	icache_enable ();
+
+	return 0;
+}
+
+int misc_init_r (void)
+{
+#ifdef CONFIG_PCI
+	pci_init();
+#endif
+	setenv("verify", "n");
+	return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+int dram_init (void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size	 = PHYS_SDRAM_1_SIZE;
+
+#ifdef CONFIG_CM_SPD_DETECT
+	{
+extern void dram_query(void);
+	unsigned long cm_reg_sdram;
+	unsigned long sdram_shift;
+
+	dram_query();	/* Assembler accesses to CM registers */
+			/* Queries the SPD values	      */
+
+	/* Obtain the SDRAM size from the CM SDRAM register */
+
+	cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
+	/*   Register	      SDRAM size
+	 *
+	 *   0xXXXXXXbbb000bb	 16 MB
+	 *   0xXXXXXXbbb001bb	 32 MB
+	 *   0xXXXXXXbbb010bb	 64 MB
+	 *   0xXXXXXXbbb011bb	128 MB
+	 *   0xXXXXXXbbb100bb	256 MB
+	 *
+	 */
+	sdram_shift		 = ((cm_reg_sdram & 0x0000001C)/4)%4;
+	gd->bd->bi_dram[0].size	 = 0x01000000 << sdram_shift;
+
+	}
+#endif /* CM_SPD_DETECT */
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+#endif
diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S
new file mode 100644
index 00000000000..ab9589c95c4
--- /dev/null
+++ b/board/armltd/integrator/lowlevel_init.S
@@ -0,0 +1,213 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004, ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+	/* Reset using CM control register */
+.global reset_cpu
+reset_cpu:
+	mov	r0, #CM_BASE
+	ldr	r1,[r0,#OS_CTRL]
+	orr	r1,r1,#CMMASK_RESET
+	str	r1,[r0,#OS_CTRL]
+
+reset_failed:
+	b	reset_failed
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+	/* If U-Boot has been run after the ARM boot monitor
+	 * then all the necessary actions have been done
+	 * otherwise we are running from user flash mapped to 0x00000000
+	 * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
+	 * Changes to the (possibly soft) reset defaults of the processor
+	 * itself should be performed in cpu/arm<>/start.S
+	 * This function affects only the core module or board settings
+	 */
+
+#ifdef CONFIG_CM_INIT
+	/* CM has an initialization register
+	 * - bits in it are wired into test-chip pins to force
+	 *   reset defaults
+	 * - may need to change its contents for U-Boot
+	 */
+
+	/* set the desired CM specific value */
+	mov	r2,#CMMASK_LOWVEC	/* Vectors at 0x00000000 for all */
+
+#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
+	orr	r2,r2,#CMMASK_INIT_102
+#else
+
+#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
+     !defined (CONFIG_CM940T)
+
+#ifdef	CONFIG_CM_MULTIPLE_SSRAM
+	/* set simple mapping			*/
+	and	r2,r2,#CMMASK_MAP_SIMPLE
+#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM	*/
+
+#ifdef	CONFIG_CM_TCRAM
+	/* disable TCRAM			*/
+	and	r2,r2,#CMMASK_TCRAM_DISABLE
+#endif /* #ifdef CONFIG_CM_TCRAM		*/
+
+#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
+     defined (CONFIG_CM1136JF_S)
+
+	and	r2,r2,#CMMASK_LE
+
+#endif /* cpu with little endian initialization */
+
+	orr	r2,r2,#CMMASK_CMxx6_COMMON
+
+#endif /* CMxx6 code */
+
+#endif /* ARM102xxE value */
+
+	/* read CM_INIT		 */
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_INIT]
+	/* check against desired bit setting */
+	and	r3,r1,r2
+	cmp	r3,r2
+	beq	init_reg_OK
+
+	/* lock for change */
+	mov	r3, #CMVAL_LOCK1
+	add	r3,r3,#CMVAL_LOCK2
+	str	r3, [r0, #OS_LOCK]
+	/* set desired value */
+	orr	r1,r1,r2
+	/* write & relock CM_INIT */
+	str	r1, [r0, #OS_INIT]
+	mov	r1, #CMVAL_UNLOCK
+	str	r1, [r0, #OS_LOCK]
+
+	/* soft reset so new values used */
+	b	reset_cpu
+
+init_reg_OK:
+
+#endif /* CONFIG_CM_INIT */
+
+	mov	pc, lr
+
+#ifdef	CONFIG_CM_SPD_DETECT
+	/* Fast memory is available for the DRAM data
+	 * - ensure it has been transferred, then summarize the data
+	 *   into a CM register
+	 */
+.globl dram_query
+dram_query:
+	stmfd	r13!,{r4-r6,lr}
+	/* set up SDRAM info					*/
+	/* - based on example code from the CM User Guide */
+	mov	r0, #CM_BASE
+
+readspdbit:
+	ldr	r1, [r0, #OS_SDRAM]	/* read the SDRAM register	*/
+	and	r1, r1, #0x20		/* mask SPD bit (5)		*/
+	cmp	r1, #0x20		/* test if set			*/
+	bne	readspdbit
+
+setupsdram:
+	add	r0, r0, #OS_SPD		/* address the copy of the SDP data	*/
+	ldrb	r1, [r0, #3]		/* number of row address lines		*/
+	ldrb	r2, [r0, #4]		/* number of column address lines	*/
+	ldrb	r3, [r0, #5]		/* number of banks			*/
+	ldrb	r4, [r0, #31]		/* module bank density			*/
+	mul	r5, r4, r3		/* size of SDRAM (MB divided by 4)	*/
+	mov	r5, r5, ASL#2		/* size in MB				*/
+	mov	r0, #CM_BASE		/* reload for later code		*/
+	cmp	r5, #0x10		/* is it 16MB?				*/
+	bne	not16
+	mov	r6, #0x2		/* store size and CAS latency of 2	*/
+	b	writesize
+
+not16:
+	cmp	r5, #0x20		/* is it  32MB? */
+	bne	not32
+	mov	r6, #0x6
+	b	writesize
+
+not32:
+	cmp	r5, #0x40		/* is it  64MB? */
+	bne	not64
+	mov	r6, #0xa
+	b	writesize
+
+not64:
+	cmp	r5, #0x80		/* is it 128MB? */
+	bne	not128
+	mov	r6, #0xe
+	b	writesize
+
+not128:
+	/* if it is none of these sizes then it is either 256MB, or
+	 * there is no SDRAM fitted so default to 256MB
+	 */
+	mov	r6, #0x12
+
+writesize:
+	mov	r1, r1, ASL#8		/* row addr lines from SDRAM reg */
+	orr	r2, r1, r2, ASL#12	/* OR in column address lines	 */
+	orr	r3, r2, r3, ASL#16	/* OR in number of banks	 */
+	orr	r6, r6, r3		/* OR in size and CAS latency	 */
+	str	r6, [r0, #OS_SDRAM]	/* store SDRAM parameters	 */
+
+#endif /* #ifdef CONFIG_CM_SPD_DETECT */
+
+	ldmfd	r13!,{r4-r6,pc}			/* back to caller */
+
+#ifdef	CONFIG_CM_REMAP
+	/* CM remap bit is operational
+	 * - use it to map writeable memory at 0x00000000, in place of flash
+	 */
+.globl cm_remap
+cm_remap:
+	stmfd	r13!,{r4-r10,lr}
+
+	mov	r0, #CM_BASE
+	ldr	r1, [r0, #OS_CTRL]
+	orr	r1, r1, #CMMASK_REMAP	/* set remap and led bits */
+	str	r1, [r0, #OS_CTRL]
+
+	/* Now 0x00000000 is writeable, replace the vectors	*/
+	ldr	r0, =_start	/* r0 <- start of vectors	*/
+	ldr	r2, =_armboot_start	/* r2 <- past vectors	*/
+	sub	r1,r1,r1		/* destination 0x00000000	*/
+
+copy_vec:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]	*/
+	stmia	r1!, {r3-r10}		/* copy to	 target address [r1]	*/
+	cmp	r0, r2			/* until source end address [r2]	*/
+	ble	copy_vec
+
+	ldmfd	r13!,{r4-r10,pc}	/* back to caller			*/
+
+#endif /* #ifdef CONFIG_CM_REMAP */
diff --git a/board/armltd/integrator/pci.c b/board/armltd/integrator/pci.c
new file mode 100644
index 00000000000..6ee2a853076
--- /dev/null
+++ b/board/armltd/integrator/pci.c
@@ -0,0 +1,396 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_integrator_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif /* CONFIG_PCI_PNP */
+
+/* V3 access routines */
+#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
+#define _V3Read16(o)	(*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
+
+#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
+#define _V3Read32(o)	(*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
+
+/* Compute address necessary to access PCI config space for the given */
+/* bus and device. */
+#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({				\
+	unsigned int __address, __devicebit;						\
+	unsigned short __mapaddress;							\
+	unsigned int __dev = PCI_DEV (__devfn); /* FIXME to check!! (slot?) */		\
+											\
+	if (__bus == 0) {								\
+		/* local bus segment so need a type 0 config cycle */			\
+		/* build the PCI configuration "address" with one-hot in A31-A11 */	\
+		__address = PCI_CONFIG_BASE;						\
+		__address |= ((__devfn & 0x07) << 8);					\
+		__address |= __offset & 0xFF;						\
+		__mapaddress = 0x000A;	/* 101=>config cycle, 0=>A1=A0=0 */		\
+		__devicebit = (1 << (__dev + 11));					\
+											\
+		if ((__devicebit & 0xFF000000) != 0) {					\
+			/* high order bits are handled by the MAP register */		\
+			__mapaddress |= (__devicebit >> 16);				\
+		} else {								\
+			/* low order bits handled directly in the address */		\
+			__address |= __devicebit;					\
+		}									\
+	} else {		/* bus !=0 */						\
+		/* not the local bus segment so need a type 1 config cycle */		\
+		/* A31-A24 are don't care (so clear to 0) */				\
+		__mapaddress = 0x000B;	/* 101=>config cycle, 1=>A1&A0 from PCI_CFG */	\
+		__address = PCI_CONFIG_BASE;						\
+		__address |= ((__bus & 0xFF) << 16);	/* bits 23..16 = bus number	*/  \
+		__address |= ((__dev & 0x1F) << 11);	/* bits 15..11 = device number	*/  \
+		__address |= ((__devfn & 0x07) << 8);	/* bits 10..8  = function number */ \
+		__address |= __offset & 0xFF;	/* bits	 7..0  = register number */	\
+	}										\
+	_V3Write16 (V3_LB_MAP1, __mapaddress);						\
+	__address;									\
+})
+
+/* _V3OpenConfigWindow - open V3 configuration window */
+#define _V3OpenConfigWindow() {								\
+	/* Set up base0 to see all 512Mbytes of memory space (not	     */		\
+	/* prefetchable), this frees up base1 for re-use by configuration*/		\
+	/* memory */									\
+											\
+	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
+				     0x90 | V3_LB_BASE_M_ENABLE));			\
+	/* Set up base1 to point into configuration space, note that MAP1 */		\
+	/* register is set up by pciMakeConfigAddress(). */				\
+											\
+	_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) |			\
+				     0x40 | V3_LB_BASE_M_ENABLE));			\
+}
+
+/* _V3CloseConfigWindow - close V3 configuration window */
+#define _V3CloseConfigWindow() {							\
+    /* Reassign base1 for use by prefetchable PCI memory */				\
+	_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000)	\
+					| 0x84 | V3_LB_BASE_M_ENABLE));			\
+	_V3Write16 (V3_LB_MAP1,								\
+	    (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006);	\
+											\
+	/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */	\
+											\
+	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
+			     0x80 | V3_LB_BASE_M_ENABLE));				\
+}
+
+static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
+				     int offset, unsigned char *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							       PCI_FUNC (dev),
+							       offset);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_read__word (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned short *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+								PCI_FUNC (dev),
+								offset);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_read_dword (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned int *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+								PCI_FUNC (dev),
+								offset);
+	*val |= (*(volatile unsigned int *)
+		 PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
+				     (offset + 2))) << 16;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_byte (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned char val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							PCI_FUNC (dev),
+							offset) = val;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_word (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned short val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 offset) = val;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_dword (struct pci_controller *hose,
+				       pci_dev_t dev, int offset,
+				       unsigned int val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 offset) = (val & 0xFFFF);
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 (offset + 2)) = ((val >> 16) & 0xFFFF);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+/******************************
+ * PCI initialisation
+ ******************************/
+
+struct pci_controller integrator_hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_integrator_config_table,
+#endif
+};
+
+void pci_init_board (void)
+{
+	volatile int i, j;
+	struct pci_controller *hose = &integrator_hose;
+
+	/* setting this register will take the V3 out of reset */
+
+	*(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
+
+	/* wait a few usecs to settle the device and the PCI bus */
+
+	for (i = 0; i < 100; i++)
+		j = i + 1;
+
+	/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
+		(unsigned short) (V3_BASE >> 16);
+
+	do {
+		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
+		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
+			0x55;
+	} while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
+		 || *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
+						 4) != 0x55);
+
+	/* Make sure that V3 register access is not locked, if it is, unlock it */
+
+	if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
+	     V3_SYSTEM_M_LOCK)
+	    == V3_SYSTEM_M_LOCK)
+		*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
+
+	/* Ensure that the slave accesses from PCI are disabled while we */
+	/* setup windows */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
+		~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
+
+	/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
+		~V3_SYSTEM_M_RST_OUT;
+
+	/* Make all accesses from PCI space retry until we're ready for them */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
+		V3_PCI_CFG_M_RETRY_EN;
+
+	/* Set up any V3 PCI Configuration Registers that we absolutely have to */
+	/* LB_CFG controls Local Bus protocol. */
+	/* Enable LocalBus byte strobes for READ accesses too. */
+	/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
+
+	/* PCI_CMD controls overall PCI operation. */
+	/* Enable PCI bus master. */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
+
+	/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
+		(INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
+					      V3_PCI_MAP_M_REG_EN |
+					      V3_PCI_MAP_M_ENABLE);
+
+	/* PCI_BASE0 is the PCI address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
+		INTEGRATOR_BOOT_ROM_BASE;
+
+	/* PCI_MAP1 is LOCAL address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
+		(INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
+						V3_PCI_MAP_M_REG_EN |
+						V3_PCI_MAP_M_ENABLE);
+
+	/* PCI_BASE1 is the PCI address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
+		INTEGRATOR_HDR0_SDRAM_BASE;
+
+	/* Set up the windows from local bus memory into PCI configuration, */
+	/* I/O and Memory. */
+	/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
+		((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
+
+	/* PCI Configuration, use LB_BASE1/LB_MAP1. */
+
+	/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
+	/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
+	/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
+
+	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
+		INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
+		((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
+
+	/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
+
+	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
+		INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
+		(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
+
+	/* Allow accesses to PCI Configuration space */
+	/* and set up A1, A0 for type 1 config cycles */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
+		((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
+		 ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
+		V3_PCI_CFG_M_AD_LOW0;
+
+	/* now we can allow in PCI MEMORY accesses */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
+		(*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
+		V3_COMMAND_M_MEM_EN;
+
+	/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
+	/* initialise and lock the V3 system register so that no one else */
+	/* can play with it */
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
+		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
+		V3_SYSTEM_M_RST_OUT;
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
+		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
+		V3_SYSTEM_M_LOCK;
+
+	/*
+	 * Register the hose
+	 */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* System memory space */
+	pci_set_region (hose->regions + 0,
+			0x00000000, 0x40000000, 0x01000000,
+			PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	/* PCI Memory - config space */
+	pci_set_region (hose->regions + 1,
+			0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
+
+	/* PCI V3 regs */
+	pci_set_region (hose->regions + 2,
+			0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (hose->regions + 3,
+			0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
+
+	pci_set_ops (hose,
+		     pci_integrator_read_byte,
+		     pci_integrator_read__word,
+		     pci_integrator_read_dword,
+		     pci_integrator_write_byte,
+		     pci_integrator_write_word, pci_integrator_write_dword);
+
+	hose->region_count = 4;
+
+	pci_register_hose (hose);
+
+	pciauto_config_init (hose);
+	pciauto_config_device (hose, 0);
+
+	hose->last_busno = pci_hose_scan (hose);
+}
diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
new file mode 100755
index 00000000000..d67bdc234ee
--- /dev/null
+++ b/board/armltd/integrator/split_by_variant.sh
@@ -0,0 +1,235 @@
+#!/bin/sh
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/armltd/integrator
+
+config_file=${obj}include/config.h
+
+if [ "$1" = "ap" ]
+then
+# ---------------------------------------------------------
+# Set the platform defines
+# ---------------------------------------------------------
+echo -n	"/* Integrator configuration implied "	 > ${config_file}
+echo	" by Makefile target */"		>> ${config_file}
+echo -n	"#define CONFIG_INTEGRATOR"		>> ${config_file}
+echo	" /* Integrator board */"		>> ${config_file}
+echo -n	"#define CONFIG_ARCH_INTEGRATOR"	>> ${config_file}
+echo	" 1 /* Integrator/AP	 */"		>> ${config_file}
+# ---------------------------------------------------------
+#	Set the core module defines according to Core Module
+# ---------------------------------------------------------
+cpu="arm_intcm"
+variant="unknown core module"
+
+if [ "$2" = "" ]
+then
+	echo "$0:: No parameters - using arm_intcm"
+else
+	case "$2" in
+	ap7_config)
+	cpu="arm_intcm"
+	variant="unported core module CM7TDMI"
+	;;
+
+	ap966)
+	cpu="arm_intcm"
+	variant="unported core module CM966E-S"
+	;;
+
+	ap922_config)
+	cpu="arm_intcm"
+	variant="unported core module CM922T"
+	;;
+
+	integratorap_config	|	\
+	ap_config)
+	cpu="arm_intcm"
+	variant="unspecified core module"
+	;;
+
+	ap720t_config)
+	cpu="arm720t"
+	echo -n	"#define CONFIG_CM720T"			>> ${config_file}
+	echo	" 1 /* CPU core is ARM720T */ "		>> ${config_file}
+	variant="Core module CM720T"
+	;;
+
+	ap922_XA10_config)
+	cpu="arm_intcm"
+	variant="unported core module CM922T_XA10"
+	echo -n	"#define CONFIG_CM922T_XA10"		>> ${config_file}
+	echo	" 1 /* CPU core is ARM922T_XA10 */"	>> ${config_file}
+	;;
+
+	ap920t_config)
+	cpu="arm920t"
+	variant="Core module CM920T"
+	echo -n	"#define CONFIG_CM920T"			>> ${config_file}
+	echo	" 1 /* CPU core is ARM920T */"		>> ${config_file}
+	;;
+
+	ap926ejs_config)
+	cpu="arm926ejs"
+	variant="Core module CM926EJ-S"
+	echo -n	"#define CONFIG_CM926EJ_S"		>> ${config_file}
+	echo	" 1 /* CPU core is ARM926EJ-S */ "	>> ${config_file}
+	;;
+
+	ap946es_config)
+	cpu="arm946es"
+	variant="Core module CM946E-S"
+	echo -n	"#define CONFIG_CM946E_S"		>> ${config_file}
+	echo	" 1 /* CPU core is ARM946E-S */ "	>> ${config_file}
+	;;
+
+	*)
+	echo "$0:: Unknown core module"
+	variant="unknown core module"
+	cpu="arm_intcm"
+	;;
+
+	esac
+fi
+
+case "$cpu" in
+	arm_intcm)
+	echo "/* Core module undefined/not ported */"	>> ${config_file}
+	echo "#define CONFIG_ARM_INTCM 1"		>> ${config_file}
+	echo -n	"#undef CONFIG_CM_MULTIPLE_SSRAM"	>> ${config_file}
+	echo -n	"	/* CM may not have "		>> ${config_file}
+	echo	"multiple SSRAM mapping */"		>> ${config_file}
+	echo -n	"#undef CONFIG_CM_SPD_DETECT "		>> ${config_file}
+	echo -n	" /* CM may not support SPD "		>> ${config_file}
+	echo	"query */"				>> ${config_file}
+	echo -n	"#undef CONFIG_CM_REMAP	"		>> ${config_file}
+	echo -n	" /* CM may not support "		>> ${config_file}
+	echo	"remapping */"				>> ${config_file}
+	echo -n	"#undef CONFIG_CM_INIT	"		>> ${config_file}
+	echo -n	" /* CM may not have	"		>> ${config_file}
+	echo	"initialization reg */"			>> ${config_file}
+	echo -n	"#undef CONFIG_CM_TCRAM	"		>> ${config_file}
+	echo	" /* CM may not have TCRAM */"		>> ${config_file}
+	echo -n	" /* May not be processor "		>> ${config_file}
+	echo	"without cache support */"		>> ${config_file}
+	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> ${config_file}
+	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> ${config_file}
+	;;
+
+	arm720t)
+	echo -n	" /* May not be processor "		>> ${config_file}
+	echo	"without cache support */"		>> ${config_file}
+	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> ${config_file}
+	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> ${config_file}
+	;;
+esac
+
+else
+
+# ---------------------------------------------------------
+# Set the platform defines
+# ---------------------------------------------------------
+echo -n "/* Integrator configuration implied "   > ${config_file}
+echo    " by Makefile target */"		>> ${config_file}
+echo -n "#define CONFIG_INTEGRATOR"		>> ${config_file}
+echo	 " /* Integrator board */"		>> ${config_file}
+echo -n "#define CONFIG_ARCH_CINTEGRATOR"	>> ${config_file}
+echo     " 1 /* Integrator/CP   */"		>> ${config_file}
+
+cpu="arm_intcm"
+variant="unknown core module"
+
+if [ "$2" = "" ]
+then
+	echo "$0:: No parameters - using arm_intcm"
+else
+	case "$2" in
+	ap966)
+	cpu="arm_intcm"
+	variant="unported core module CM966E-S"
+	;;
+
+	ap922_config)
+	cpu="arm_intcm"
+	variant="unported core module CM922T"
+	;;
+
+	integratorcp_config	|	\
+	cp_config)
+	cpu="arm_intcm"
+	variant="unspecified core module"
+	;;
+
+	cp922_XA10_config)
+	cpu="arm_intcm"
+	variant="unported core module CM922T_XA10"
+	echo -n "#define CONFIG_CM922T_XA10"		>> ${config_file}
+	echo    " 1 /* CPU core is ARM922T_XA10 */"	>> ${config_file}
+	;;
+
+	cp920t_config)
+	cpu="arm920t"
+	variant="Core module CM920T"
+	echo -n "#define CONFIG_CM920T"			>> ${config_file}
+	echo    " 1 /* CPU core is ARM920T */"		>> ${config_file}
+	;;
+
+	cp926ejs_config)
+	cpu="arm926ejs"
+	variant="Core module CM926EJ-S"
+	echo -n "#define CONFIG_CM926EJ_S"		>> ${config_file}
+	echo    " 1 /* CPU core is ARM926EJ-S */ "	>> ${config_file}
+	;;
+
+
+	cp946es_config)
+	cpu="arm946es"
+	variant="Core module CM946E-S"
+	echo -n "#define CONFIG_CM946E_S"		>> ${config_file}
+	echo    " 1 /* CPU core is ARM946E-S */ "	>> ${config_file}
+	;;
+
+	cp1136_config)
+	cpu="arm1136"
+	variant="Core module CM1136EJF-S"
+	echo -n "#define CONFIG_CM1136EJF_S"		>> ${config_file}
+	echo    " 1 /* CPU core is ARM1136JF-S */ "	>> ${config_file}
+	;;
+
+	*)
+	echo "$0:: Unknown core module"
+	variant="unknown core module"
+	cpu="arm_intcm"
+	;;
+
+	esac
+
+fi
+
+if [ "$cpu" = "arm_intcm" ]
+then
+	echo "/* Core module undefined/not ported */"	>> ${config_file}
+	echo "#define CONFIG_ARM_INTCM 1"		>> ${config_file}
+	echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM"	>> ${config_file}
+	echo -n "  /* CM may not have "			>> ${config_file}
+	echo    "multiple SSRAM mapping */"		>> ${config_file}
+	echo -n "#undef CONFIG_CM_SPD_DETECT "		>> ${config_file}
+	echo -n " /* CM may not support SPD "		>> ${config_file}
+	echo    "query */"				>> ${config_file}
+	echo -n "#undef CONFIG_CM_REMAP  "		>> ${config_file}
+	echo -n " /* CM may not support "		>> ${config_file}
+	echo    "remapping */"				>> ${config_file}
+	echo -n "#undef CONFIG_CM_INIT  "		>> ${config_file}
+	echo -n " /* CM may not have  "			>> ${config_file}
+	echo    "initialization reg */"			>> ${config_file}
+	echo -n "#undef CONFIG_CM_TCRAM  "		>> ${config_file}
+	echo    " /* CM may not have TCRAM */"		>> ${config_file}
+fi
+
+fi # ap
+
+# ---------------------------------------------------------
+# Complete the configuration
+# ---------------------------------------------------------
+$MKCONFIG -a integrator$1 arm $cpu integrator armltd;
+echo "Variant:: $variant with core $cpu"
diff --git a/board/armltd/integrator/timer.c b/board/armltd/integrator/timer.c
new file mode 100644
index 00000000000..087cf596221
--- /dev/null
+++ b/board/armltd/integrator/timer.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+
+#ifdef CONFIG_ARCH_CINTEGRATOR
+#define DIV_CLOCK_INIT	1
+#define TIMER_LOAD_VAL	0xFFFFFFFFL
+#else
+#define DIV_CLOCK_INIT	256
+#define TIMER_LOAD_VAL	0x0000FFFFL
+#endif
+/* The Integrator/CP timer1 is clocked at 1MHz
+ * can be divided by 16 or 256
+ * and can be set up as a 32-bit timer
+ */
+/* U-Boot expects a 32 bit timer, running at CONFIG_SYS_HZ */
+/* Keep total timer count to avoid losing decrements < div_timer */
+static unsigned long long total_count = 0;
+static unsigned long long lastdec;	 /* Timer reading at last call	   */
+/* Divisor applied to timer clock */
+static unsigned long long div_clock = DIV_CLOCK_INIT;
+static unsigned long long div_timer = 1; /* Divisor to convert timer reading
+					  * change to U-Boot ticks
+					  */
+/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
+static ulong timestamp;		/* U-Boot ticks since startup */
+
+#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4))
+
+/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
+ *  - unless otherwise stated
+ */
+
+/* starts up a counter
+ * - the Integrator/CP timer can be set up to issue an interrupt */
+int timer_init (void)
+{
+	/* Load timer with initial value */
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
+#ifdef CONFIG_ARCH_CINTEGRATOR
+	/* Set timer to be
+	 *	enabled		 1
+	 *	periodic	 1
+	 *	no interrupts	 0
+	 *	X		 0
+	 *	divider 1	00 == less rounding error
+	 *	32 bit		 1
+	 *	wrapping	 0
+	 */
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2;
+#else
+	/* Set timer to be
+	 *	enabled		 1
+	 *	free-running	 0
+	 *	XX		00
+	 *	divider 256	10
+	 *	XX		00
+	 */
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
+#endif
+
+	/* init the timestamp */
+	total_count = 0ULL;
+	reset_timer_masked();
+
+	div_timer = CONFIG_SYS_HZ_CLOCK;
+	do_div(div_timer, CONFIG_SYS_HZ);
+	do_div(div_timer, div_clock);
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base_ticks)
+{
+	return get_timer_masked () - base_ticks;
+}
+
+void set_timer (ulong ticks)
+{
+	timestamp   = ticks;
+	total_count = ticks * div_timer;
+}
+
+/* delay usec useconds */
+void udelay (unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	/* Convert to U-Boot ticks */
+	tmo  = usec * CONFIG_SYS_HZ;
+	tmo /= (1000000L);
+
+	tmp  = get_timer_masked();	/* get current timestamp */
+	tmo += tmp;			/* form target timestamp */
+
+	while (get_timer_masked () < tmo) {/* loop till event */
+		/*NOP*/;
+	}
+}
+
+void reset_timer_masked (void)
+{
+	/* capure current decrementer value    */
+	lastdec	  = READ_TIMER;
+	/* start "advancing" time stamp from 0 */
+	timestamp = 0L;
+}
+
+/* converts the timer reading to U-Boot ticks	       */
+/* the timestamp is the number of ticks since reset    */
+ulong get_timer_masked (void)
+{
+	/* get current count */
+	unsigned long long now = READ_TIMER;
+
+	if(now > lastdec) {
+		/* Must have wrapped */
+		total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
+	} else {
+		total_count += lastdec - now;
+	}
+	lastdec	= now;
+
+	/* Reuse "now" */
+	now = total_count;
+	do_div(now, div_timer);
+	timestamp = now;
+
+	return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+	udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * Return the timebase clock frequency
+ * i.e. how often the timer decrements
+ */
+ulong get_tbclk (void)
+{
+	unsigned long long tmp = CONFIG_SYS_HZ_CLOCK;
+
+	do_div(tmp, div_clock);
+
+	return tmp;
+}