Initial revision

1 files changed, 118 insertions, 0 deletions

diff --git a/board/cogent/README b/board/cogent/README
new file mode 100644
index 00000000000..e6eef662c9b
--- /dev/null
+++ b/board/cogent/README
@@ -0,0 +1,118 @@
+Cogent Modular Architecture configuration
+-----------------------------------------
+
+As the name suggests, the Cogent platform is a modular system where
+you have a motherboard into which plugs a cpu module and one or more
+i/o modules. This provides very nice flexibility, but makes the
+configuration task somewhat harder.
+
+The possible Cogent motherboards are:
+
+Code		Config Variable		Description
+----		---------------		-----------
+
+CMA101		CONFIG_CMA101		32MB ram, 2 ser, 1 par, rtc, dipsw,
+					2x16 lcd, eth(?)
+CMA102		CONFIG_CMA102		32MB ram, 2 ser, 1 par, rtc, dipsw,
+					2x16 lcd
+CMA111		CONFIG_CMA111		32MB ram, 1MB flash, 4 ser, 1 par,
+					rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI,
+					10/100TP eth
+CMA120		CONFIG_CMA120		32MB ram, 1MB flash, 4 ser, 1 par,
+					rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI,
+					10/100TP eth, 2xPCMCIA, video/lcd-panel
+CMA150		CONFIG_CMA150		8MB ram, 1MB flash, 2 ser, 1 par, rtc,
+					ps/2 kbd/mse, 2x16 lcd
+
+The possible Cogent PowerPC CPU modules are:
+
+Code		Config Variable		Description
+----		---------------		-----------
+
+CMA278-603EV	CONFIG_CMA278_603EV	PPC603ev CPU, 66MHz clock, 512K EPROM,
+					JTAG/COP
+CMA278-603ER	CONFIG_CMA278_603ER	PPC603er CPU, 66MHz clock, 512K EPROM,
+					JTAG/COP
+CMA278-740	CONFIG_CMA278_740	PPC740 CPU, 66MHz clock, 512K EPROM,
+					JTAG/COP
+CMA280-509	CONFIG_CMA280_509	MPC505/509 CPU, 50MHz clock,
+					512K EPROM, BDM
+CMA282		CONFIG_CMA282		MPC8260 CPU, 66MHz clock, 512K EPROM,
+					JTAG, 16M RAM, 1 x ser (SMC2),
+					1 x 10baseT PHY (SCC4), 1 x 10/100 TP
+					PHY (FCC1), 2 x 48pin DIN (FCC2 + TDM1)
+CMA285		CONFIG_CMA285		MPC801 CPU, 33MHz clock, 512K EPROM,
+					BDM
+CMA286-21	CONFIG_CMA286_21	MPC821 CPU, 66MHz clock, 512K EPROM,
+					BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
+					1 x 10baseT PHY (SCC2)
+CMA286-60-OLD	CONFIG_CMA286_60_OLD	MPC860 CPU, 33MHz clock, 128K EPROM,
+					BDM
+CMA286-60	CONFIG_CMA286_60	MPC860 CPU, 66MHz clock, 512K EPROM,
+					BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
+					1 x 10baseT PHY (SCC2)
+CMA286-60P	CONFIG_CMA286_60P	MPC860P CPU, 66MHz clock, 512K EPROM,
+					BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
+					1 x 10baseT PHY (SCC2)
+CMA287-23	CONFIG_CMA287_23	MPC823 CPU, 33MHz clock, 512K EPROM,
+					BDM
+CMA287-50	CONFIG_CMA287_50	MPC850 CPU, 33MHz clock, 512K EPROM,
+					BDM
+
+(there are a lot of other cpu modules with ARM, MIPS and M-CORE CPUs,
+but we'll worry about those later).
+
+The possible Cogent CMA I/O Modules are:
+
+Code		Config Variable		Description
+----		---------------		-----------
+
+CMA302		CONFIG_CMA302		up to 16M flash, ps/2 keyboard/mouse
+CMA352		CONFIG_CMA352		CMAbus <=> PCI
+
+Currently supported:
+
+	Motherboards:	CMA102
+	CPU Modules:	CMA286-60-OLD
+	I/O Modules:	CMA302 I/O module
+
+To configure, perform the usual U-Boot configuration task of editing
+"include/config_cogent_mpc8xx.h" and reviewing all the options and
+settings in there. In particular, check the chip select values
+installed into the memory controller's various option and base
+registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and
+CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
+into the SCCR - via the define CFG_SCCR. Finally, decide whether you
+want the serial console on motherboard serial port A or on one of the
+8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
+(NONE means use Cogent motherboard serial port A).
+
+Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
+the base address of the EPROM for the CPU module. This should be the
+same as the value selected for CFG_MONITOR_BASE in
+"include/config_cogent_*.h" (in fact, I have made this automatic via
+the -DTEXT_BASE=... option in CPPFLAGS).
+
+Finally, set the values of the make variables $(CMA_MB) and $(CMA_IOMS).
+
+$(CMA_MB) is the name of the directory that contains support for your
+motherboard. At this stage, only "cma10x" exists, which supports the
+CMA101 and CMA102 motherboards - but only selected devices, namely
+serial, lcd and dipsw.
+
+$(CMA_IOMS) is a list of zero or more directories that contain
+support for the i/o modules you have installed. At this stage, only
+"cma302" exists, which supports the CMA302 flash i/o module - but
+only the flash part, not the ps/2 keyboard and mouse interfaces.
+
+There should be a make variable for each of the above directories,
+which is the directory name with "_O" appended. This make variable is
+a list of object files to compile from that directory and include in
+the library.
+
+	e.g. cma10x_O = serial.o ...
+
+That's it. Good Luck.
+
+Murray.Jensen@cmst.csiro.au
+August 31, 2000.