ppc4xx: Remove superfluous dram_init() call or replace it by initdram()

Historically the 405 U-Boot port had a dram_init() call in early init
stage. This function was still called from start.S and most of the time
coded in assembler. This is not needed anymore (since a long time) and
boards should implement the common initdram() function in C instead.

This patch now removed the dram_init() call from start.S and removes the
empty implementations that are scattered through most of the 405 board
ports. Some older board ports really implement this dram_init() though.
These are:

csb272
csb472
ERIC
EXBITGEN
W7OLMC
W7OLMG

I changed those boards to call this assembler dram_init() function now
from their board specific initdram() instead. This *should* work, but please
test again on those platforms. And it is perhaps a good idea that those
boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
some time. So further patches welcome here.

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 9 insertions, 0 deletions

diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index 24c6f0d9869..640412d10d1 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -27,6 +27,8 @@
 #include <miiphy.h>
 #include <ppc4xx_enet.h>
 
+void sdram_init(void);
+
 /*
  * Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
  *
@@ -124,6 +126,13 @@ long initdram (int board_type)
 	ulong bank_size;
 	ulong tmp;
 
+	/*
+	 * ToDo: Move the asm init routine sdram_init() to this C file,
+	 * or even better use some common ppc4xx code available
+	 * in cpu/ppc4xx
+	 */
+	sdram_init();
+
 	tot_size = 0;
 
 	mtdcr (memcfga, mem_mb0cf);