powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS

Drop support for these two legacy boards.

Signed-off-by: York Sun <york.sun@nxp.com>

7 files changed, 0 insertions, 452 deletions

diff --git a/board/freescale/mpc8540ads/Kconfig b/board/freescale/mpc8540ads/Kconfig
deleted file mode 100644
index 35a85455476..00000000000
--- a/board/freescale/mpc8540ads/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8540ADS
-
-config SYS_BOARD
-	default "mpc8540ads"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8540ADS"
-
-endif
diff --git a/board/freescale/mpc8540ads/MAINTAINERS b/board/freescale/mpc8540ads/MAINTAINERS
deleted file mode 100644
index acc48218d46..00000000000
--- a/board/freescale/mpc8540ads/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MPC8540ADS BOARD
-#M:	Kumar Gala <kumar.gala@freescale.com>
-S:	Orphan (since 2014-06)
-F:	board/freescale/mpc8540ads/
-F:	include/configs/MPC8540ADS.h
-F:	configs/MPC8540ADS_defconfig
diff --git a/board/freescale/mpc8540ads/Makefile b/board/freescale/mpc8540ads/Makefile
deleted file mode 100644
index 6f82c7f7ac3..00000000000
--- a/board/freescale/mpc8540ads/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8540ads.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c
deleted file mode 100644
index 10fb2b3d600..00000000000
--- a/board/freescale/mpc8540ads/ddr.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 0;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/* 2T timing enable */
-	popts->twot_en = 1;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
deleted file mode 100644
index 41f2e02bfd8..00000000000
--- a/board/freescale/mpc8540ads/law.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     BCSR                    1M
- * 0xff00_0000     0xffff_ffff     FLASH (boot bank)       16M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-struct law_entry law_table[] = {
-#ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR),
-#endif
-	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI),
-	/* This is not so much the SDRAM map as it is the whole localbus map. */
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
deleted file mode 100644
index 1069e2c8c86..00000000000
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2002,2003, Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <fsl_ddr_sdram.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-void local_bus_init(void);
-
-int checkboard (void)
-{
-	puts("Board: ADS\n");
-
-#ifdef CONFIG_PCI
-	printf("PCI1: 32 bit, %d MHz (compiled)\n",
-	       CONFIG_SYS_CLK_FREQ / 1000000);
-#else
-	printf("PCI1: disabled\n");
-#endif
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init();
-
-	return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
-	 * If localbus freq is > 133MHz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
-
-	} else {
-		/*
-		 * On REV1 boards, need to change CLKDIV before enable DLL.
-		 * Default CLKDIV is 8, change it to 4 temporarily.
-		 */
-		uint pvr = get_pvr();
-		uint temp_lbcdll = 0;
-
-		if (pvr == PVR_85xx_REV1) {
-			/* FIXME: Justify the high bit here. */
-			lbc->lcrr = 0x10000004;
-		}
-
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void lbc_sdram_init(void)
-{
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-
-	puts("LBC SDRAM: ");
-	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
-		   "\n       ");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("sync");
-
-	/*
-	 * Configure the SDRAM controller.
-	 */
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5;
-	asm("sync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-phys_size_t fixed_sdram(void)
-{
-  #ifndef CONFIG_SYS_RAMBOOT
-	struct ccsr_ddr __iomem *ddr =
-		(struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR);
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-	ddr->err_sbe = 0x00ff0000;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-
-static struct pci_controller hose;
-
-#endif	/* CONFIG_PCI */
-
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
-#endif /* CONFIG_PCI */
-}
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
-
-	ft_cpu_setup(blob, bd);
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-#ifdef CONFIG_PCI
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = hose.last_busno - hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
deleted file mode 100644
index d5ee791da65..00000000000
--- a/board/freescale/mpc8540ads/tlb.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_16M, 1),
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT, CONFIG_SYS_RIO_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xd0000000	256M	Rapid IO MEM Second half
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 6, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLB 7:	16K	Non-cacheable, guarded
-	 * 0xf8000000	16K	BCSR registers
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_16K, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);