powerpc: T2080QDS: Remove macro T2080QDS

Use TARGET_T2080QDS from Kconfig instead.

Signed-off-by: York Sun <york.sun@nxp.com>

3 files changed, 12 insertions, 12 deletions

diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
index ef04a26463f..3a6d0309e4c 100644
--- a/board/freescale/t208xqds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -7,7 +7,7 @@
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
-obj-$(CONFIG_T2080QDS) += t208xqds.o eth_t208xqds.o
+obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o
 obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index e92b5d3a058..59480a33f2d 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -32,7 +32,7 @@
 #define EMI1_RGMII1	0
 #define EMI1_RGMII2     1
 #define EMI1_SLOT1	2
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 #define EMI1_SLOT2	6
 #define EMI1_SLOT3	3
 #define EMI1_SLOT4	4
@@ -59,7 +59,7 @@
 static int mdio_mux[NUM_FM_PORTS];
 
 static const char * const mdio_names[] = {
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	"T2080QDS_MDIO_RGMII1",
 	"T2080QDS_MDIO_RGMII2",
 	"T2080QDS_MDIO_SLOT1",
@@ -82,7 +82,7 @@ static const char * const mdio_names[] = {
 };
 
 /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
 #elif defined(CONFIG_T2081QDS)
 static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
@@ -204,7 +204,7 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 	int off;
 
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_T2080QDS
+#ifdef CONFIG_TARGET_T2080QDS
 	serdes_corenet_t *srds_regs =
 		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
 	u32 srds1_pccr1 = in_be32(&srds_regs->srdspccr1);
@@ -217,7 +217,7 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
 		phy = fm_info_get_phy_address(port);
 		switch (port) {
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 		case FM1_DTSEC1:
 			if (hwconfig_sub("fsl_1gkx", "fm1_1g1")) {
 				media_type = 1;
@@ -454,7 +454,7 @@ static void initialize_lane_to_slot(void)
 	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
 	switch (srds_s1) {
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	case 0x51:
 	case 0x5f:
 	case 0x65:
@@ -552,7 +552,7 @@ int board_eth_init(bd_t *bis)
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
 #endif
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
@@ -663,7 +663,7 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
 		break;
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	case 0xd9:
 	case 0xd3:
 	case 0xcb:
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index d016329cd13..e307ccb3188 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -99,7 +99,7 @@ int brd_mux_lane_to_slot(void)
 	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
 	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
 				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
@@ -109,7 +109,7 @@ int brd_mux_lane_to_slot(void)
 	case 0:
 		/* SerDes1 is not enabled */
 		break;
-#if defined(CONFIG_T2080QDS)
+#if defined(CONFIG_TARGET_T2080QDS)
 	case 0x1b:
 	case 0x1c:
 	case 0xa2:
@@ -268,7 +268,7 @@ int brd_mux_lane_to_slot(void)
 		return -1;
 	}
 
-#ifdef CONFIG_T2080QDS
+#ifdef CONFIG_TARGET_T2080QDS
 	switch (srds_prtcl_s2) {
 	case 0:
 		/* SerDes2 is not enabled */